I love my RidgeRock! I upgraded my servos, removed tire foam, used 1.9 beadlocks and new tires. Added wheel weights to all four tires. Also added black wheel weights to both diffs. Changed out lower arms to high clearance aluminum arms. The rig is unstoppable. One of my favorite vehicles. So impressive. Great video! Keep up the great work.
@RoadsideRC
11 ай бұрын
Thanks! Glad you like the truck!
@TonyZaragoza-xh3sc
7 ай бұрын
Which arms did you get? Been trying to look for some
@BangForYourBuckRc
Жыл бұрын
Well done Troy! All the right mods for this awesome little truck, for very little $ $ yielded impressive performance gains in the end! Awesome job brother!👊🏼😆👍🏻
@RoadsideRC
Жыл бұрын
Yes! Thank you!
@christianrambissoon1141
Жыл бұрын
I appreciate you, Troy.
@RoadsideRC
Жыл бұрын
Thank you!
@christianrambissoon1141
Жыл бұрын
@@RoadsideRC how can i share my danchee build with you?
@tktk-om8cg
Жыл бұрын
Watching this crawler makes it hard believe it's under 200 bucks unbelievable value
@RoadsideRC
Жыл бұрын
Agree!
@TheRCBuildersPost
Жыл бұрын
Great video, Troy! Great mods. I ordered one of these danchees. They look fun and for the price I figured why not? I have plenty of high dollar builds lol. Something about these rigs just calls to me. Really enjoyed your video! Gonna have to find someone to print that tray for me since my 3d printer fried lol.
@RoadsideRC
Жыл бұрын
Agree 100% Sometimes the cheaper and fun cars can be really fun!
@douggregoryHOTMotorsports
3 ай бұрын
impressive improvement. I am intrigued by the Ridgerock and it's MOA. Could be in my future plans.
@RoadsideRC
3 ай бұрын
If you get it, I hope you enjoy it!
@billythekidrcs1769
Жыл бұрын
Finally got my Danchee man I'm all over your videos trying to make mine get better
@RoadsideRC
Жыл бұрын
Awesome! Hope they help!
@urdonercjeremyburris7541
Жыл бұрын
Adding the lead moved weight to the driver side. That was a big help
@RoadsideRC
Жыл бұрын
How does that help?
@rickrogers2649
Жыл бұрын
Love hangin' out at Troy's RC Skunkworks. 😁 Great mods for low bucks, love it !
@RoadsideRC
Жыл бұрын
Thank you!
@vicferrarisgarage
Жыл бұрын
Waiting for mine to arrive & I found this video! Now I’m so excited for it to arrive. 😊
@RoadsideRC
Жыл бұрын
Great! Glad to hear it!
@IowaBudgetRCBashers
Жыл бұрын
We added steel wheels weights to the top Of the servos on Grayson’s .. made a big difference.. might have to try the shock keys..
@RoadsideRC
Жыл бұрын
Even with this, I am still not 100% satisfied with the weight distribution. I really want to remove more rear weight and get more in the front. Perhaps that is one of the drawbacks of MOA when it adds a lump of metal at the rear!
@billyb5057
Жыл бұрын
when its not perfect then you get to work on it making so much better *full view always💯Au👍big like*
@RoadsideRC
Жыл бұрын
That is part of the fun!
@sebastianjaromi3540
Жыл бұрын
Love my danchee! I used bullet weights-(amazon-Bullet Weights 1-Pound Roll Hollow Core Lead Wire Fishing Line, 1/4-Inch,) on the rims of mine and it made a world of difference with the injora 2.2 hyrax knock offs.
@RoadsideRC
Жыл бұрын
Interesting! Thanks for the feedback!
@vansantsam
7 ай бұрын
anti-squat, anti-dive - drill 4 holes in the frame and move the upper links down, this will form a ">" on the rear and "
@RoadsideRC
7 ай бұрын
Thanks for the tip!
@DigitalConfusion1
Ай бұрын
Or should I just buy the shock keys and adjust accordingly? I appreciate the advice.
@gihonda127
4 ай бұрын
I am relatively new to this channel, and I got one of these last month. I don't have a 3d printer for that battery tray mod, and I don't exactly know how to change from a factory battery set up to the same or similar battery set up you have done on this one. Do you still use the same receiver that it came with? I have changed the receiver and esc on my brushless Typhon and Senton, but I am new to the crawler scene, and just don't feel comfortable yet with the delicateness of it all. Any insight is appreciated. Awesome mods btw, and explaining everything, it's very helpful.
@RoadsideRC
4 ай бұрын
Thanks for joining! Yes - I kept the factory electronics in order to maintain the 4WS, etc. To run a lipo, all you need is the battery itself. The factory battery is a Li-ion, so going to a Lipo - the ESC is fine.
@gihonda127
4 ай бұрын
@@RoadsideRC can you recommend a lipo bat that would fit or the one that you use?
@RoadsideRC
4 ай бұрын
@@gihonda127 I use these on many of my crawlers. Note - you will need to solder on a new connector to the truck - these XT60 connectors are much better. www.amazon.com/dp/B08R72ZF6N/ref=cm_sw_r_as_gl_apa_gl_i_9A33B9MEA9VHYSYVW9ZK?linkCode=ml2&tag=roadsiderc-20
@KingMrBigE
Жыл бұрын
Ok couple of things... first off, moving the shock mounting points to the farthest back and up helps alot. No keys needed. Second, use some high clearance links that are a few mm longer than the stock plastic ones which will not only increase the shock angles but will also decrease the height. Lowered it considerably with just these mods alone. You are way overthinking it. Oh and just attach the weights to the tops of the servos, 4 of them fit perfectly.
@RoadsideRC
Жыл бұрын
I know the E10 links fit, but my understanding is they are the same length. Which links did you use? I prefer my weight to be as low as possible, hence them going low. Plus, they are hidden, so don't look ugly.
@KingMrBigE
Жыл бұрын
@@RoadsideRC I used the E-10 links. You will have to run your wires up the center y links. Because of the bends it makes it sit lower and flatter. I used square black weights from Amazon and I use a Traxxas ID lipo in the stock spot. Proline BFG tires w/hairbuns, It easily out crawls my modified C2X that's now a C1.
@RoadsideRC
Жыл бұрын
@@KingMrBigE Now you can move that lipo up front and it will be even better!
@KingMrBigE
Жыл бұрын
@@RoadsideRC no, that's ok... my CG is low enough that it side hills fine. Too much mass that far forward will make it endo more easily when going downhill.
@TheUnknown714
Жыл бұрын
For the part that you pointed out where it previously fell but in your current run after mods it didn't... do you think it was due to the lowering of the Ridgerock or the weights that were added? I guess what I'm asking is was one mod more the factor than the other for it not falling? Great video.
@RoadsideRC
Жыл бұрын
The lowering had more of an impact than the weight.
@shonjensen5759
Жыл бұрын
I like the weights in the axle good idea and looks better
@RoadsideRC
Жыл бұрын
Thanks - agree, I don't like seeing them outside.
@billythekidrcs1769
Жыл бұрын
I'm getting one soon or most of your parts listed in the link below
@RoadsideRC
Жыл бұрын
Awesome! Hope you enjoy it!
@DigitalConfusion1
Ай бұрын
Does it still have Cog Stall even with a 3S battery?
@RoadsideRC
Ай бұрын
Yes it does. Just a core issue with the design.
@anthonyrummel8610
8 ай бұрын
Just glue the weights to the bottom of the axle and Pan them black and you're done.
@RoadsideRC
8 ай бұрын
1) it doesn't look good 2) don't want to reduce ground clearance
@rayharris2654
7 ай бұрын
Is the ridge rock basically the Everest 10- cuz I’m looking for parts for my e-10.
@RoadsideRC
7 ай бұрын
Nope! Very different vehicles.
@rayharris2654
7 ай бұрын
Thank you
@jamesgoodwin2450
Жыл бұрын
What wheels and tires are you using please
@RoadsideRC
Жыл бұрын
Hi James! The video description has links to all of the parts.
@adamy2603
Жыл бұрын
What wheel spacers did you use? And do you k own where to order the spacers for the shocks? I can't find them anywhere
@RoadsideRC
Жыл бұрын
These are the wheel hubs I used: amzn.to/41PVJDt And the shock standoffs were just some I had laying around.
@coreya4825
Жыл бұрын
Have you had any issues with the plastic c hubs in your ridgerock? I was glad I bought two danshees one for parts.
@RoadsideRC
Жыл бұрын
I have not! Haven't broken a thing on it!
@RichB07
Жыл бұрын
Is this one still around ? And the wheels and tires ? I was just looking at one
@RoadsideRC
Жыл бұрын
Yep! I think Redcat still sells it. Honestly - if I remember correctly, you have some other crawlers that would be better than this in the long run.
@RichB07
Жыл бұрын
@Roadside RC ya just something to mess with . I have a couple projects I'm finishing up bully2 and a lcg for crazy lines . I just seen some things I thought was cool with one of those . I guess more of bouncer style build with one instead of just crawling.
@Ch_1465
Жыл бұрын
Does the battery that was added increase battery life? I want to get into crawling and maximize my drive time.
@RoadsideRC
Жыл бұрын
Sure does!!!
@IowaBudgetRCBashers
Жыл бұрын
Are you running 3s on the stock electronics Troy??
@RoadsideRC
Жыл бұрын
Yes - runs 3S great on the stock ESC!
@christianrambissoon1141
Жыл бұрын
@@RoadsideRC have seen sonoran scale studios use 3s also but i"m afraid 🤦🏽♂️
@stevenhollingsworth6902
Жыл бұрын
Can you change out the body on the Danchee Ridgerock?
@RoadsideRC
Жыл бұрын
You can. However, you need to get a little creative based on the side-mount style it uses.
@SlavaRC
Жыл бұрын
🥰🤩💥💯👍👏
@adamy2603
Жыл бұрын
Do the wheels bolt right on?
@RoadsideRC
Жыл бұрын
I used a wider wheel hub to get the proper spacing. I believe there is a link in the video description.
@sws1994
Жыл бұрын
Where did you find that scale?
@RoadsideRC
Жыл бұрын
It is the older version of this one: amzn.to/3F5pA1k
@sws1994
Жыл бұрын
Ok thank you. I seen that 1 when I looked it up. I like the stand alone version like yours but I guess times have changed lol. Just ordered the danshee. I did the 4 wheel steer on my Everest 10 last night with your help! Turned out great! Love your channel you’re awesome!
@ronerie
Жыл бұрын
How many RC, 1/10 scale trucks come with all the weight of a motor and a servo built onto each axle ? That's a LOT of weight you would otherwise have a hard time getting on there, besides zip tying an old motor & servo onto each axle for weight. And you think you still need more, lol !!! Tunnel vision.........MUST HAVE MORE WEIGHT !?!? At what point are you just kicking a dead horse ?
@RoadsideRC
Жыл бұрын
Have you ever studied full comp crawlers? Check out a few of those (like the Bully) and see what you think. That is how far it can go.
@r8d4tube
Жыл бұрын
“ He can do what he wants. it’s his toy truck. “ 😂
@workingclassperson2124
Жыл бұрын
Added better tires to mine and it’s 2x better
@RoadsideRC
Жыл бұрын
Tires do make a huge difference!!!
@DigitalConfusion1
Ай бұрын
Fairly inexpensive recommendation?
@jacob55yearsago47
16 күн бұрын
Did u replace the wheels or just the tires and what one did u choose? Please
@DigitalConfusion1
15 күн бұрын
@jacob55yearsago47 Please what?
@generalcaeser9176
Жыл бұрын
I'm getting bent wheel axels and everyone is out of sock. Anyone know where I can get upgraded wheel axels that don't bend easily?
@RoadsideRC
Жыл бұрын
That is really odd. I haven't heard of them bending before. Since this truck is not very popular, I don't think there are many aftermarket parts for them.
@generalcaeser9176
Жыл бұрын
@@RoadsideRC Are you sure they aren't that popular? I seam see them everywhere and loads of videos. It seams to be the go to for getting into the hobby for cheap. Maybe I'm wrong. But yeah, I have a bent wheel shaft FR and it makes the wheel wabble. It must be a known problem because they are out of stock everywhere. Sadly. I did see a massive upgrade that included the whole assembly but I can not for the life of me find it again.
Пікірлер: 86