Data logging with Diablosport Intune i3 - Data log on a #jeep Grand Cherokee SRT for Hemifever tune
with #fred_eazy21
Alright so here is how we Datalog in the Diablosport Intune, Start the engine and let it idle then Plug in the tuner into the OBD2 port and let it boot up. Select scan tool, press continue, select datalogging, press Add Pids to List, select the pid groups, then add in the additional PIDs that hemifever requested,
When done adding the pid’s click back button to save the pid selection. Then select record and leave it hooked up and drive around for the log. Once done, stop the log by pressing the back arrow and choose to save it. It can take a couple minutes for it to save.
After that plug the tuner back into the computer, head on into the logs folder and send hemifever the log file via email.
Next simply wait for his response and if all is well you are good to go! He may send you a revised tune file based on his review in which you will need to install the revised tune afterwards.
The DiabloSport inTune i3 is a popular handheld tuner that allows users to adjust various performance parameters of their vehicle's engine control unit (ECU), including fuel and ignition timing, throttle response, and more. Additionally, the inTune i3 can also function as a data logger, allowing users to monitor and record real-time data from their vehicle's sensors. Here's how you can use the inTune i3 for data logging:
Access Data Logging Feature: Start by powering on your inTune i3 and accessing the main menu. Navigate to the data logging feature, which may be labeled as "Data Logging," "Datalog," or something similar, depending on the specific firmware version of your device.
Select Parameters: Once you're in the data logging menu, you'll typically have the option to select which parameters you want to monitor and record. This can include engine RPM, vehicle speed, throttle position, coolant temperature, air-fuel ratio, and more. Use the device's interface to choose the parameters you're interested in logging.
Start Logging: After selecting the parameters, initiate the data logging process by pressing the appropriate button on the inTune i3. The device will begin recording real-time data from the vehicle's sensors.
Monitor Data: As the data logging process is underway, you'll be able to monitor the selected parameters on the inTune i3's display screen. This allows you to keep track of vital information about your vehicle's performance in real-time.
Stop Logging: Once you've collected a sufficient amount of data or completed your testing, stop the data logging process by pressing the appropriate button on the inTune i3.
Save or Export Data: Depending on the capabilities of your specific device and firmware version, you may have the option to save the logged data directly to the inTune i3's internal memory or export it to a computer for further analysis. Follow the on-screen prompts to save or export the data as needed.
Review and Analyze Data: After logging data, you can review and analyze it to gain insights into your vehicle's performance and make informed decisions about potential adjustments or modifications.
By utilizing the data logging feature of the DiabloSport inTune i3, you can gather valuable information about your vehicle's performance and behavior, helping you optimize its settings for improved power, efficiency, and drivability.
For more Great #Mopar content please subscribe!
Негізгі бет data logging with diablo intune i3
Пікірлер: 7