The Bar - Walnut Hardwood Custom Made Soundbar using the Arylic Up2Stream AMP V4, Dayton Audio 4" Reference Series Woofers model RS-100 4 ohms and Dayton Audio 1 1/8" Soft Dome Tweeters model ND28F 6 Ohms.
U$ 350.00 Approximately cost for parts in the USA
MATERIALS:
Maple Plywood, Walnut, Metal, Drivers, X-over Components, Connectors, Ports.
Walnut hardwood case with Plywood front baffle and rear baffle. Finished with Good Stuff wax. Steel Metal modern legs treated with Evaporust, primed, painted and clear coated on matte black.
LINKS:
EUROPE:
Dayton Audio RS100 Full-Range driver:
ndt5.net/c/?si...
Dayton Audio ND28F Soft-Dome Tweeter:
ndt5.net/c/?si...
Arylic Up2Stream AMP V4:
ndt5.net/c/?si...
Ports:
ndt5.net/c/?si...
Sonic Barrier:
ndt5.net/c/?si...
US:
Dayton Audio RS100 Full-Range driver:
www.parts-expr...
Dayton Audio ND28F Soft-Dome Tweeter:
www.parts-expr...
Arylic Up2Stream AMP V4:
amzn.to/3RSU3Um
Ports:
amzn.to/3BLXSFi
Sonic Barrier:
www.parts-expr...
Speaker Wire - Copper Clad Aluminum:
amzn.to/3LlJbKD
Speaker Wire - Oxygen Free Copper:
amzn.to/39tNkPe
ROUTER BITS FOR FRONT BAFFLE:
5/8" Radius Rounding Over Bit:
amzn.to/3UlOnUx
1" Radius Rounding Over Bit:
amzn.to/3QQjt3v
3/8" Rabbeting Bit Bearing Set:
amzn.to/3Bsa2lh
MEASUREMENTS:
Speaker Outside - 13.6 x 106.8 x 27.6 cm
Box Internal - 38.2 x 9.8 x 24 cm (each side)
Box Volume - 9 Liters aprox. (each side)
BASIC TOOLS:
Plam Sander: amzn.to/39wtgvy
Compressor: amzn.to/3wAxB90
Nail Gun: amzn.to/3LrlYqm
Circular Saw: amzn.to/3yNB7Ql
Drill Kit: amzn.to/39osBMR
Drill Bits: amzn.to/3llbApI
Screwdriver Bits: amzn.to/3MmMgLS
Router: amzn.to/3wyyHCb
Router Circle Jig: amzn.to/3MuZLcw
Router Bit Set: amzn.to/3FRFriK
Clamps: amzn.to/3FR9IhO
Quick Clamps: amzn.to/3FSRufH
Soldering Station: amzn.to/3PCFLXk
INSTAGRAM: @sonnoradesign
Негізгі бет Dayton Audio Reference Wi-Fi / Bluetooth Soundbar | Arylic Amp | DIY | Walnut Hardwood Metal Legs
No video
Пікірлер: 107