The Dbrand's Darkplates contains the entire Cease & Desist Email in Binary sent from Sony.
@nascompares
2 жыл бұрын
I did NOT know that! I'll have a check etc, but if that's true, that is some top tier brass! Respect. Cheers for sharing
@WildharpieECW
2 жыл бұрын
Yes for the first plates why they had to change them now they can't do anything about it.
@SippyCup_Official
2 жыл бұрын
@@nascompares dbrand published the letter
@PhiLLyPhiLLz
2 жыл бұрын
There’s awesome for that. Especially reading the product description on their website, it always make me laugh.
@sarsuje
Жыл бұрын
@@nascompares k
@brianstalter6569
2 жыл бұрын
Pretty cool test results - I bought the DP 2.0 for the aesthetics but glad to see it didn't make the cooling worse in the process.
@koniredfox8640
2 жыл бұрын
ur comment is 3 months old, any negative changes after using the dbrand plates? I was curious if the vents will cause problems with dust buildup or damage some parts inside the PS5
@brianstalter6569
2 жыл бұрын
@@koniredfox8640 I haven't noticed any negative side effects yet - nor clogged vents. Luckily the plates are easy to remove and the vents easy to access - so should you experience different results, cleaning should be a breeze.
@ITX-EcoClass
Жыл бұрын
@@koniredfox8640 YOUR comment is 3 months old, now, have you pulled the trigger on this purchase, yet? BTW, PS5 owner for almost two years, now, and I can tell you that you're going to get dust inside the system regardless of which plates you use.
@Sketchi_
Жыл бұрын
@@ITX-EcoClassyou comment was 3 months old 3 plus 1 months ago how does that make you feel
@ITX-EcoClass
Жыл бұрын
@@Sketchi_ Like I just got off of brianstalter's mom after pulling an all nighter. Have a good day, sir, and thanks for asking - appreciate ya 👍🏼🙏🏼
@sincerelysincere702
2 жыл бұрын
The ssd card cover is important to keep on. The cooling system actually blows cool air into the ssd card housing from what playstation has stated.
@fixyourgame6157
2 жыл бұрын
They must be wrong then if the ambient is hotter with it on.
@tymack5629
Жыл бұрын
@@fixyourgame6157 it’s also to keep dust out
@barrigany
Жыл бұрын
GRAUGEAR Metal Heat Dissipation Cover looks like a good compromise of leaving the cover on
@bitterclown
2 жыл бұрын
Thank you for making the video! You mentioned great points there and glad you are going to do more comparisons, especially on the Sabrent Custom Heatsink based on how it’s designed and how it can potentially be more affected based on its design. Once again great work man and looking forward to the next video!
@TheChild888
2 жыл бұрын
Thank you for making the dbrand Darkplate 2.0 temperature test vid. I have similar set up with black Darkplate 2.0 & Seagate Firecuda 530 2TB M.2 SSD with factory heatsink on my PS5. Indeed just shaved off 2 - 5C° and doesn’t affect much, but certainly good to know dbrand Darkplate 2.0 does its job ever slightly to lower the C°. Anticipating next test with Sabrent PS5 heatsink cover with Darkplate 2.0, may be also try Elecgear and PNY heatsink too with the temperature test with Darkplate 2.0? Keep up the good work!
@ThisOrThat13
2 жыл бұрын
If you already went that far with the 2TD. Might as well just pay the price for removed 5C°/41F° over the long term.
@leonrys4551
2 жыл бұрын
Dbrand plate looks promising. I can't wait for more testing.
@xavierholt4319
2 жыл бұрын
Only legit video with testing on ps5 faceplates! Thank you, video definitely deserves more views !💪🏽
@bdre5555
2 жыл бұрын
Been waiting for someone to temperature test the 2.0 plates. Thanks!
@floyd0216jj
2 жыл бұрын
Really appreciate the detailed reviews do you !!! Waiting for my DBrand plates during this next March drop. Can’t wait for next video on the tests with and without M.2 cover, while still using the Dark Plates.
@angelicsailor1st
2 жыл бұрын
I think the vent holes themselves could have been made to look better instead of like a target/bullseye.
@leonprez231
2 жыл бұрын
Absolutely fantastic well done. Look forward to more tests on this subject 🙌
@nascompares
2 жыл бұрын
Cheers buddy
@GabrielJosephAhYea
2 жыл бұрын
@@nascompares How/Where did you get the classic Playstation logo on the center strip near the power and eject buttons?
@EstonianBerserker
2 жыл бұрын
Great results. I bought DarkPlates 2.0 anyways for looks & the vent (just for the peace of MY mind knowing that there’s “better” airflow)
@RyeRyeL
2 жыл бұрын
The thing here is, it'll target certain temps. So the question here should be, is it quieter with the Dark Plates?
@AK-qh4yy
2 жыл бұрын
I literally do not understand the comments from people saying they’re surprised that the dark plates even work. Just because the original PlayStation plates was designed around negative pressure does not take away the physics of having more airflow come through the system to cool it off. I’ve had my Darkplates for about a week now and there is a drastic difference in cooling. I’ll play disc games and when I take my disk out to put it away the disc is much much cooler than it was using the old plates. Plus the air that comes out of the PlayStation is much cooler. I’m a Sony fan boy but even I can recognize that there is a flaw in the original plates. Negative pressure aside, the physics of having more airflow will always have better results. It’s common sense and I’m surprised by the lack of it by people‘s blind following to Sony‘s design philosophy…
@AK-qh4yy
2 жыл бұрын
Good point. I actually did this before my Darkplates came in. I used an external fan. The Darkplates come with a standard dust filter on each ventilation hole that you would find on any PC set up and they are easy to remove and clean so dust shouldn’t be an issue with standard cleaning. I would rather my PS5 run much cooler with slightly more dust exposure over 5 years than much hotter with minimal dust exposure. Look up gamer nexus thermal test on PS5. The PS5s memory temperature runs right at the max temperature threshold of 90 Celsius, while having to plates dropped that temperature by 5 Celsius across the system, which over hours/days/years of having would have a large impact because of how close the system was running right on the edge of its thermal envelope. 90 Celsius to 85 Celsius is much different than 80 Celsius to 75 Celsius. Just my two cents.
@bagelbomb1887
Жыл бұрын
I can honestly say my disk has never been hot when I have removed it but it should be obvious adding more holes doesn't improve cooling. There is a reason they designed the console the way they did and I'm gonna trust the engineers who spent years testing and perfecting cooling over a cheap plate maker 😂
@eden20111
Ай бұрын
@@AK-qh4yysooo can you give an update?? Hows it running now
@LeeJoRo
2 жыл бұрын
Finally got an Elecgear heatsink (still shopping for SSD's)... I wonder how the darkplates 2.0 work with that heatsink...
@myst8217
2 жыл бұрын
The rounded edges is the selling point alone. Idk why Sony chose the design they did
@phil_tony_corky
Жыл бұрын
M2 slot does get air flow, if you look just above the connector for the M2 you will see a gap for air flow.
@richkim6013
2 жыл бұрын
love this review. i ended up not getting the dbrand plates due to $$$$ for cooling value and just opted for black bubble vented plates that allow my ps5 rgb ring lights on the fans shine through. thank you for the review!!!
@Pav56
Жыл бұрын
Thank you for doing this. Very good review with lots of fantastic well presented information.
@promanstyle9252
2 жыл бұрын
Thanks for the super informative comparisons. I watched all 3 parts of this video. However, I do wish that you had a video showing temperature difference between the original Sony’s PS5 Plate vs Dbrand’s PS5 Darkplate 2.0 with Sabrent M.2 NVMe Heatsink installed with Rocket 4 Plus or any other SSD installed along with Sabrent Heatsink. So basically it would be interesting to see how much cooler temperatures can be achieved on Darkplate 2.0 with SSD + Sabrent Heatsink installed compared to the original PS5 plate.
@nunocampos1805
2 жыл бұрын
You're doing the Lord's work with these PS5 videos.
@Healcraft
Жыл бұрын
I bought one of the Sabrent heatsinks that replaces that metal cover, I'm not sure if it works well but I haven't had any issues (also using it with a sabrent drive). I like how it looks, got it for $16.99 Canadian, normally they are $25. Forgive me if you have already tested it, but I just came upon this video when researching darkplates 2.0. *edit* i found you have a video on it already, nice!!!
@notsohandyandy
2 жыл бұрын
I'm confused. At 13:30 your charts show that temperatures fell way down between games using the Darkplates, whereas it stayed almost the same with the regular PS5 plates. How is it, then, that your conclusion from that is that the Darkplates have WORSE heat dissipation? If temps are falling faster between games... that's better dissipation, is it not?
@bagelbomb1887
Жыл бұрын
No Sony designed a very specific cooling solution and dark plates reduce it's efficiency.
@notsohandyandy
Жыл бұрын
@@bagelbomb1887ok lol, but that doesn't address my question. His conclusion does not align with the results shown, unless I'm misunderstanding something about the charts.
@justified1496
2 жыл бұрын
Take the silver metal protective covers off of the fans as well. That's where a lot of blockage comes from.
@Kobra31677
2 жыл бұрын
I have to say that I have just picked up these plates with the light strips (green) and central cover. Its more for aesthetics really as I'm not a fan of the 'collar' on the original plates, but hey it is down to each individual I suppose. But if there are any additional benefits like dropping a couple of degrees, then all the better. Have the Samsung 980 PRO SSD with the heatsink as well so hopefully will get similar results. But great video sir! Like sent ;)
@MrOstracize
2 жыл бұрын
I have the same set up as yours but i just bought the DP today (haven't even open my PS5 yet lol) any negative effects or downsides with the plates and the M.2 SSD in which regards to temp? your response is greatly appreciated.
@iHCSx
Жыл бұрын
I dont like the dark plates because they are round. I prefer harsher edges.
@iyeetsecurity922
5 ай бұрын
I like the rounded panels better personally. But I use the console on its side and the stock stand wobbles and slides, so I had to get get stock style ones again to fit a proper stand. Tried only using the bottom side original, but it looked odd with the rounded one on top.
@panthera2
Жыл бұрын
How did you get the Ps2 logo for your ps5 front plate ??? 😮
@dirty313glove5
2 жыл бұрын
Getting the faceplates with cooling vents is just going to accumulate dust faster on the fans
@reign7157
Жыл бұрын
Nope the DP has filters built in to the vents the dust only accumulates on the filters
@dinbabwa452
Жыл бұрын
Personally I like the OG plates it's nice to know there temp difference is negligible
@JimCGames
2 жыл бұрын
Interesting. Here’s a slightly different take: The DBrand plate has increased air intake. With this being the case, how do these measure up over time whereas dust builds up internally creating a heat blanket. It seems to me that using the DBrand covers will result in the need to clean the internals more frequently. Also of note is that the opening on the DBrand covers didn’t appear to have any sort of mesh to help capture dust particles from entering internally.
@IronGuardLegionnaire
2 жыл бұрын
the darkplate have an easily removable mesh grills. Cleaning will be much easier. all through if your taking nthe plates off you might as well take the fan out of the console and give that a clean too
@JimCGames
2 жыл бұрын
@@IronGuardLegionnaire, thanks, I didn’t see them. Edit: I watched a video from Linus Tech Tips after your comment and this initial reply where he was installing the plates and in the video the mesh plate dislodged from the plates.
@Scott-M1
11 ай бұрын
A bit late to the party. But i think an overlooked thing on the PS5 is those metal grills over each side of the fan. Which i assume are mainly there for protection, and perhaps catching large clumps of dust. But at the same time, i thiink it obscures a percentage of the fan itself, and is another obstacle for air to travel through. I removed mine completely and screwed the fan back in without them, along with the dbrand case with filters on. It's probably a minimal thing in reality, but I find it opens up the fan a bit more to airflow. As long as the console is in a safe spot and is cleaned regularly, it wouldn't hurt, right?
@TrickerAndy
9 ай бұрын
I love that the binary inside the dbrand is the sony C&D letter translated haha
@jamesfoxx6650
Жыл бұрын
I found a vented SSD cover for my corsair 2TB and will be using the original external plate covers till i either see a price drop or more significant temp drops before i spend 60-80 dollars on a vented external plate.
@norcalbowhunter3264
Жыл бұрын
I'm curious what the temperature inside the console is like. You measure the SSD that isn't really affected by the plates and still saw a slight improvement, but it doesn't tell us anything about the temperatures of the CPU and GPU which is what the plates are supposed to effect to bigger effect.
@christiansta2771
Жыл бұрын
The charts should have had the same scales. Hard to compare between the two.
@lancealex382
Жыл бұрын
Another useful analysis, thank you!
@54918ss
Жыл бұрын
I don’t understand these temperature tests, doesn’t higher temp mean the console is dissipating more heat? So the cpu will be cooler then the console dissipating less heat?
@jonahpiscani1292
2 жыл бұрын
Where did you get that colored PS logo on the front of your system?
@shnicegaming
2 жыл бұрын
I was going to comment the same thing lol I want it
@GabrielJosephAhYea
2 жыл бұрын
came to the comments for the same question but no answer I can find yet
@DiamondDead
2 жыл бұрын
you can get these virtually everywhere nowadays on ebay and etsy
@hi-jl9dg
Жыл бұрын
So is it fine to lay the ps5 on its side with the Dbrand case dose it blow hot air back into it
@andrewwright5535
Жыл бұрын
Big unanswered question is how much more dust enters the PS5 with the vented covers and how that increase will impact temperatures IRL over time.
@timothyA8678
2 жыл бұрын
Thank you for making the video!
@ps5andstuffhere
Жыл бұрын
The vents just stop air going around the console properly. Don't seem like a good idea
@kelvinbungcayao2625
Жыл бұрын
the video showed the problem was inefficient heat exhaustion with stock.
@nated5355
Жыл бұрын
Air only need to pass over the SSD/NVMe because it's not internal. Other than that, it doesn't need to go around the console. It's pointless. It only needs to go into the console to cool the internal components which the fans accomplish. The darkplates in theory will allow this to happen with less restriction while including a filter for dust.
@MrPickle_OG
2 жыл бұрын
I personally am loving my Dbrand dark plates but I’m not loving the vents. And reason being I noticed there’s not as much heat coming out the back like normally it would. Which leads me to believe its not cooling the internals as it should normally. I’m thinking of taping up the inside where the vents are or putting back on the ps plates.
@ulengrau6357
2 жыл бұрын
I think something that's not being mentioned (by dbrand) is that maybe the materials are different (the composition of the plastics used) from those used by SONY, and that this has something to do with heat dissipation. Maybe the dbrand plates insulate better for some small reason, and that's going to matter in the overall life of the console.
@TDIETZ22
2 жыл бұрын
Not as much heat coming out actually means the air coming out as cooler. Therefore they are actually working.
@BThaDynasty
Жыл бұрын
@@TDIETZ22 Bingo
@nusdogg
Жыл бұрын
@@TDIETZ22 Exactly. If it's coming out hot, it definitely needs a better solution.
@fazered-prank3306
4 ай бұрын
Tbh everything about having airflow is good like for example if it has airflow then you get dust but also performance but no airflow means no dust but less performance
@EckoTheFox1
2 жыл бұрын
What about a test with and without the mesh over the fan holes?
@RandoOnline_
2 жыл бұрын
Love these PS5 videos. Thank you for making them.
@The7Reaper
Жыл бұрын
So basically it's such a miniscule difference you should really only make a purchase if you like the asthetic of the plates over the original
@kangri08
2 жыл бұрын
can you do a video test with the original sony plate on the intake of the fan and the dbrand on the exhaust side? im interest on knowing if keeping the sony back pressure but maximizing the discharge pressure make a different outcome.Also would be interesting to see dbrand vents closed about 30% allowing a little more air directed through the front of the playstation allowing maybe more cooling to the SSD area.
@GamerErman2001
2 жыл бұрын
Both sides of the fan are intake. The exhausted air eventually leaves the back of the console next to where you plug in the power and HDMI.
@kangri08
2 жыл бұрын
@@GamerErman2001 ooh ok thanks i misunderstood the whole air directions then,i thought it was 1 intake and 1 exhaust.
@ulengrau6357
2 жыл бұрын
Thank you for this. Glad to see it's a $50-$60 waste of money that can go to a game, or an extra controller... unless, of course, one buys it simply for the aesthetics.
@spillinout
2 жыл бұрын
Not only that, due to the fan holes on the side it’s gonna be a major dust magnet and all you get is some slightly better cooling. With these plates on you will have to clean it a lot more regularly than with the original plates. What i think is that Sony thought of this and thus sacrificed a bit of cooling for a longer lifespan of the console
@_T.M.G_
2 жыл бұрын
@@spillinout although you would think that having the sole intake on the top of the console would allow for more dust to get inside, as dust typically falls downward, rather than moving sideways. so the intake vents seem like they'd benefit more from being on the sides rather than the top. but maybe I'm missing something, idk.
@reign7157
Жыл бұрын
@@spillinout those side vents don't let dust in nowhere near as much as the vents have mesh filters, u can't notice them in this video but they are there
@antiflag46
2 жыл бұрын
Bought the Darkplates, added a screen to the curved intake/center section and even added a micron mesh to the Darkplates to reduce dust intake. I also plan on removing the fan cover grates since they are simply useless unless you plan on travelling. The Darkplates actually DO assist in active airflow and reduce the internal temps by 40 degrees Fahrenheit. Gamers Nexus numbers with/without PS cover plates temps would be more accurate since they placed thermocouples on the actual memory and processors and you are taking a temperature of a piece of plastic that maintains the same constant temperature. I even ran a FLIR camera on my system after 2 hours of playing Horizon Forbidden West in resolution (4K) mode and the exhaust temperature was 50 degrees Fahrenheit lower than with my old PS5 plates. Plus you can see on your PS plates side that the graphics activity is much less drastic than the Darkplates video. you were really trying to get that processor to work on the Darkplate side.
@tony81gtsport4
2 жыл бұрын
Hi would you advise me to buy this cover my greetings for you
@barrigany
Жыл бұрын
50 degree difference? That's a lot
@WaffledMags
Жыл бұрын
What PS sticker is on the front of the system? Love the look!
@mrblackout22
Жыл бұрын
Orientation makes a difference as well
@SiirusLee
Жыл бұрын
I so tempted to drill holes in that ssd cover plate, even with the built in heatsink on the nvme
@barrigany
Жыл бұрын
GRAUGEAR Metal Heat Dissipation Cover. Looks good too
@lloydfrancis9149
Жыл бұрын
Very good test Brilliant!!!
@RacoonEggMcoc
Жыл бұрын
Where did you get the ps logo
@TheTech660
Жыл бұрын
Thanks for this!
@technologylord4017
2 жыл бұрын
PlayStation 5 is an extremely Awesome Machine but I do have one little caveat which is how hot the back USB ports get as I’m not sure what Sony was thinking but I had my cable plugged in for just a few hours and the piece which plugs in is uncomfortably hot in My opinion !
@futurespast5150
2 жыл бұрын
Sony now sells plates on there PS website they should design a new set of plates with the vents for the fan and a better stand.
@bamban_garcia5562
2 жыл бұрын
The PlayStation 5 actual plates are designed for optimum airflow in order to ensure the console remains cool at at anytime, adding vents would compromise that
@futurespast5150
2 жыл бұрын
@@bamban_garcia5562 actually there’s a video on KZitem where they tested the original plates vs the the new aftermarket design with the fan vents and the new design kept the PS5 cooler.
@bamban_garcia5562
2 жыл бұрын
@@futurespast5150 Good to know hopefully I can.get one any year now though honestly wish the design could be chosen heck I'l pay some more for the dev kit style
@Pro_2A_1776
Жыл бұрын
Dark Plates look way better than those Sony wings. Even if they had tied, Dark Plates would get the win for esthetics imo.
@vollkerball1
2 жыл бұрын
and i was waiting for this kind of tests to buy my plates or not... writing this before watching until the end 18:12 just a question, if the darkplates make a better job of "cooling" the ps5 can you in a next time you make a video like this (please) read the exhaust temperature?
@TropicJesus
Жыл бұрын
I think that a multimillion dollar company that spent years of research, testing and designing the system with top engineers experts on the field particularly working on the ps5 should know better why it is the way it is.
@BloodBro1
Жыл бұрын
Ps5 has a magnetic airflow but what do they know right 😅
@tve5614
Жыл бұрын
What will happen if you use a external ventilator? The one you use in a livingroom for example. Just target the ventilator on the PS5.
@Respectinauto
Жыл бұрын
I was wondering if or how much of the internal temperature difference would be without the fan guards. Air moving threw them will become turbulent and slow down. In theory.
@LordBonesaw
2 жыл бұрын
Got ya self a new sub bro
@justevil100
2 жыл бұрын
Why would you no place the heat sensor where it exhausts? Putting it under the fan really doesn't represent the actual temperature difference.
@UKinQ8Gaming
Жыл бұрын
Did you make the ssd metal plate on plate off comparison video? Trying to find it. Thanks
@thewolfking2.033
2 ай бұрын
This idea might not work But it could. Buying small fans Attach them to the heat sink of the PlayStation 5 blowing in the right direction Could that work. If wired correctly and not mess up air flow. Will it make the system cooler.
@bretgtimk7968
Жыл бұрын
can you add a fan filter to that then add an usb fan to cool everything quickly
@mojomojo2091
Жыл бұрын
So the plastic holds more heat? Because the exhaust does not change due to changing the plates .
@NumberOneGar
Жыл бұрын
where'd you get the little PS sticker for the middle portion of the console?
@mct8888
2 жыл бұрын
Dremel tool and add your own vents?
@nosdivadsonofgod333
7 ай бұрын
Don’t wanna try that but vertical vs horizontal console placing ?
@captaincrunch1707
2 жыл бұрын
Nice video! Love those plates but I barely pulled the trigger on my $120 Atom50 1tb ssd. Running it with just the stock heat spreader and no cover. Pretty happy with not having to bounce PS5 games between internal and external.
@billclay2701
7 күн бұрын
PS5 is difficult to hack cool. None of these things, the plates or the fans, do much. Great review.
@shimeboe
2 жыл бұрын
You should test the newer model with the smaller heatsink
@LastSifu
Жыл бұрын
Since they’re intake fans, won’t they just build up dust much more quickly?
@LastSifu
Жыл бұрын
@@anthonymercado8126 Thanks for the info. That’s unfortunate though. They’re marketing a product that does the opposite of what they claim.
@hosainparchment5692
Жыл бұрын
I saw another KZitemr saying exactly this "You should reconsider the Dbrand case. That can fan hole actually short circuits the cooling loop and creates hotspots on your system. " ANYONE CAN COMMENT ON THIS???
@nated5355
Жыл бұрын
The only hot spots I can imagine would be between the PS5 plates and the black PS5 shell that encases all the internals....which is also where he has the probe reading ambient temperatures. The PS5 cooling fan will still operate as normal, cooling the internal components unaffected by whichever PS5 plates you run, with one exception he pointed out in a video.....dissipation of heat from the SSD without SSD cover will be drawn into the fan. SSD's don't really get that hot to begin with, so it doesn't really matter. What matters more is keeping your SSD cooler, and having ample airflow to the internal components to keep them cool as well, which both sets of plates allow. Airflow to the cooling fan will be less restricted with the darkplates though and in theory should allow for better airflow through the internal components. He's not measuring the internals though, just SSD controller and ambient. I ordered the darkplates, but decided to have my Sony plates laser cut. I'm also going with a vented SSD cover, plus a couple extra mods.
@slayer1112man
Жыл бұрын
Nas, can you use the original PS5 stand plate for those covers?
@WavyVaporizers
2 жыл бұрын
My nigga you're doing Gods work ty. Cant wait for my DP 2.0s I'm in February wave so by the end of this month I should have mine in. Anybody wanna buy the OG DP 1.0 plates hmu
@nascompares
2 жыл бұрын
Never felt more G than when I read your comment. Cheers
@WavyVaporizers
2 жыл бұрын
@@nascompares lol. Hope you're having a great weekend. Much love and light my brother
@S-420
Жыл бұрын
In fact 85 Celsius to 90 Celsius is normal for an AMD processor under load I mean look at the steam deck that thing runs like a furnace I've had mine since launch and it's still fine
@steveheap4691
Жыл бұрын
Hmm just a quick question what if u left the original plate on the disk side and the other vented would it be cooler ? So mix n match
@jayc3793
2 жыл бұрын
is that ps logo on the ps5 just a small sticker? if so where can I also get one
@TheTurboLag
2 жыл бұрын
I wanna know this too
@jayc3793
2 жыл бұрын
@@TheTurboLag hopefully one day theyll see our message lol
@TheTurboLag
2 жыл бұрын
Bro its just a sticker
@MiniMotoAlliance
2 жыл бұрын
Venturi Effect. Sony knows it. DBrand didn't understand it
@DezGaming666
6 ай бұрын
What ab the dust filters there selling on amazon?
@sagehietala3655
Жыл бұрын
great video
@ITX-EcoClass
Жыл бұрын
Great video, but you need to choose less-creepy testing music, next time.
@octogodbr5972
Жыл бұрын
How did you install the PS3 logo in your PS5??? I want to do this, but i don't know how do that.
@GabrielJosephAhYea
2 жыл бұрын
How/Where did you get the classic Playstation logo on the center strip near the power and eject buttons?
@jamess.3013
2 жыл бұрын
Flaming Toast!
@GabrielJosephAhYea
2 жыл бұрын
@@jamess.3013 It looks like Flamingtoast just has stickers to put under the original face plates. I'm talking about the tiny Playstaion logo on the black center strip of the console
@jamess.3013
2 жыл бұрын
@@GabrielJosephAhYea it’s the “button mashers” that they have. The PS logo that he’s got there is actually meant to go on the PS button on the dualsense. Trust me, I have them myself haha
@GabrielJosephAhYea
2 жыл бұрын
@@jamess.3013 Oh awesome! I'll check em out!
@TheDurim87
2 жыл бұрын
How you put the Playstation logo in the middle and where I can buy one ?
@johnreeves6854
Жыл бұрын
Ic covers the ssd so that it's li ked back with the fan stock system atleast thats what's said we all know what's said and does often varies
@MrMortyBaby
Жыл бұрын
How does PS5 function without any plates??
@krizthianov
2 жыл бұрын
I want that little logo Ps5's decal.... *.*
@richkim6013
2 жыл бұрын
stupid question but did you make sure to NOT test with the ps5 standing vertically without the factory stand? i've been reading a ton of blogs saying that running the ps5 vertically-flat (like in your non-running commmentary) inhibited air intake flow from the bottom vents.... again i'm sure you ran it horizontal but just wondering. thank you!!!!
@firstworldproblems6064
4 ай бұрын
Nah, what would sony know. Lol
@s.m.a8182
2 жыл бұрын
So no custom heatsink cover fit over that firceuda version?
@PS-fd4kl
Жыл бұрын
I own a device PS5 CFI 1116A Is the device strong?
@tyberiusztyberiusz5370
Жыл бұрын
The 2.0 should do less than original 1. Because it's Small differents between them I thought when you upgrade ventelation it will be 3x less instead of 0.5x less it's useless when you spend more money and it comes out nothing.
@Sankedoc76
Жыл бұрын
Respect to the calculator Casio
@nascompares
Жыл бұрын
Thanks bud!
@GaryMetz62348
2 жыл бұрын
Does it knock out all the dust off inside the system?
@paulbrackett60
2 жыл бұрын
You introduced 2 new variables at one time in your test. No way to tell which one made any difference over stock.
Пікірлер: 300