NOTE: This model railroad video is not intended for anyone under 14 years of age due to the use of small parts, dangerous tools, electrical items, glues, and paints.
This is edited & condensed from some 2015 videos.
The wiring of DCC power to the feeders on my N Scale layout was done a little differently than most people do it in that I wanted to have the ability to easily troubleshoot any electrical issue that might arise. To that end, the wiring was done in a modular fashion, i.e., the feeders (approximately 6 inches long) are all 22 AWG stranded wire soldered to the Peco track. The feeders are connected to 18 AWG stranded wire using solderless bayonet connectors that then go to a Euro style terminal strip. I also used 18 AWG solid wire (approximated 1.5 inches long) to jumper the red feeders as well as the green feeders on the terminal strip. The terminal strip is connected to the main power bus (12 AWG stranded wire) using a length of 14 AWG solid wire (one for the red and one for the green) and connected to the main bus using a 3M suitcase connector.
NOTE - The opening trailer music is courtesy of KZitem and is titled "Island Dream" by Chris Haugen.
Негізгі бет DCC Power to Feeders for Easy Troubleshooting
Пікірлер: 16