I hope you enjoy this one, took quite a while, and covers the whole lot, don't forget a pen and paper! Videos like these take a considerable amount of time to research and produce, if you enjoyed the content please consider supporting me on Patreon!: www.patreon.com/RedKite
@ricecake4754
4 жыл бұрын
Your diction is so good that even fan from S.Korea can understand easily!
@RedKiteRender
4 жыл бұрын
Glad to of been of help!
@ieurau-8583
3 жыл бұрын
fans from north korea seeng this video: write that down
@yyy-xxx-yyy4855
2 жыл бұрын
Hi, so do I. I am from Russia and I can understand him easily
@einarabelc5
2 жыл бұрын
Isn't that awesome!! I know the feeling when only native speakers can understand....
@rifledude303
3 жыл бұрын
Incredibly useful video, many thanks!! When practicing I've found that I sometimes get to a point where I cannot slew the pod even though it is SOI and in INS track mode... do you know if that's a known bug or am I just messing things up somehow?
@RedKiteRender
3 жыл бұрын
Probably need to press tdc depress
@rifledude303
3 жыл бұрын
@@RedKiteRender roger that, thanks again!
@04svt_twinscrew
3 жыл бұрын
I'm having an annoying bug in the Hornet with the TGP. Slave to velocity vector and designate puts the designated area shown on the HUD way off in the distance versus under the VV, but the TGP is looking in a different area.. Also same thing with waypoint designate on a waypoint, it shows correctly on the SA page as where it should be looking but its off looking somewhere else.
@peterfagan3587
3 жыл бұрын
I'm getting the same thing. When I use "slave to velocity vector" and try to designate a point on the terrain my target diamond appears well beneath the velocity vector. It's effectively going into a snowplough mode. It's easy enough to correct, since it appears in line with the desired point and I just have to slew upwards a bit with the TDC cursor, but it's annoying and wastes time at a point where my workload is rapidly increasing. You can compensate by deliberately aiming the velocity vector beyond the desired target - pitch up slightly for a second or so - but of course this doesn't offer the same degree of precision. So, these days I'm more inclined to use the HMD for this purpose, but of course this means flying at a slightly offset angle.
@peterfagan3587
3 жыл бұрын
I've worked out where I was going wrong. I had it in my mind that for the vertical velocity vector to serve as a designator I needed the dot in the middle. However, this meant making the HUD SOI. So I was confusing and conflating two separate modes. It would be handy if there was some sort of indication in the HUD of being in VVV mode with TPOD as SOI though.
@PappyGunn
3 жыл бұрын
Awesome video. As usual. But your voice puts me to sleep... But kudos for being clear, not mumbling and not using profanity which is better than I could manage...
@Kolobochok95
4 жыл бұрын
As always, amazing tutorial, no bullshit and straight to the point! Much appreciated and keep it up!
@wee6838
2 жыл бұрын
laughs in grim reapers doing nothing but handing out wrong tutorials
@slader..8953
2 жыл бұрын
@@wee6838 fr grim reapers is not even good
@Ayetsu
4 жыл бұрын
A-10C II and RedKite video in the same day? This is great!
@Tridan24
3 жыл бұрын
Your a legend Redkite. Because of folks like you who take the time to do tutorials you make it so much easier to understand, frequently visit and enjoy your greatly appreciated work. Thanks so much.
@RedKiteRender
3 жыл бұрын
Thank you kindly!
@Tamburello_1994
4 жыл бұрын
Appreciate guys like you and ralfidude stepping up with these detailed tutorials of late.
@sedlo
4 жыл бұрын
Got my pen and paper ready, can’t wait!
@sedlo
4 жыл бұрын
The reasoning for the offset had puzzled me, thanks for explaining what it is for.
@wiwa23
4 жыл бұрын
This is really good and welcome stuff. A brilliant roundup of all the features of one specific system. This is the sort of tutorial that is worth watching over and over to remain ‘current’ and get refreshed. Because whatever the case, you tend to forget stuff. Thanks for your work Redkite. It is very much appreciated!👌
@flyingfatcats517
4 жыл бұрын
As a newer Hornet driver, I greatly appreciate this like the others have said! Have shared this on our discord channel under hornet training. Thanks much!
@RedKiteRender
4 жыл бұрын
Thanks! Welcome to the Hornet! It's my second favourite (after the hog)
@hiteshbhatia8333
4 жыл бұрын
This is amazing, good to have it all in one place.
@RedKiteRender
4 жыл бұрын
It's nice to be able to cover a (mostly) complete feature too!
@sterlingarcher4989
4 жыл бұрын
Thank you for not falling for the letterbox format that so many ‘How to’ videos seem to be shifting to. It’s refreshing to be able to see what I’m being taught.
@RedKiteRender
4 жыл бұрын
KZitem's compression and low bitrate are the primary reason I prefer to do closeups! otherwise it's so easy for things to blur away, especially with lots of motion.
@ZiRo815
2 жыл бұрын
The letterbox format is a result of recording a widescreen display which has a different aspect ratio to non-widescreen displays
@jared9191
4 жыл бұрын
Holy crap, wow, that was very impressive. Thank you so much for putting in the effort for this video, i'll be using it as a reference for a long time to come!
@RedKiteRender
4 жыл бұрын
Core systems deserve the time and effort to present properly! Wouldn't want to teach someone badly.
@schwappingmags1008
4 жыл бұрын
Thanks for the tutorial, I found the hornet TGP is confusing, and harder to use than the A-10C TGP. The TGP on the A-10 is so intuitive. This tutorial helped me a lot, thanks!
@terryboyer1342
3 жыл бұрын
Agree! And I find the green screen vastly inferior to the black/white version.
@schwappingmags1008
3 жыл бұрын
@@terryboyer1342 True! I find it so hard to find targets with green scale.
@TheBizno
3 жыл бұрын
14:13' VVSLV I did use it a lot, until the HMD A2G capabilities came out :) Great Video! And yeah, I'm taking notes :)
@falcos
4 жыл бұрын
Thank you! It was hard to find videos since so much has changed over time
@Tailspin07
4 жыл бұрын
This is so good, I realize now just how much I leave on the table. Time to get out there in the sandbox and put some of these new techniques to the test!
@romagnolo
3 жыл бұрын
amazing video! Thank you! I could bet that real life F-18 pilots use this to study for their finals hahahaha
@etienneleroux6253
4 жыл бұрын
ED should put you on payroll.
@benben2846
4 жыл бұрын
no subtitles ... not cool ^^ can you put them please? THANK YOU IN ADVANCE
@benben2846
4 жыл бұрын
many thanks !!
@shawnbowers5509
4 жыл бұрын
For sure best video on the pod I've seen. Very nice job! The timelines also were every helpful.
@simplewolf5946
4 жыл бұрын
Incredible informative video. I personally never thought of using the MPCD with the TGP for greyscale. Super useful as that green overload can really take its toll on your eyes after a while. Again, great job.
@RedKiteRender
4 жыл бұрын
Can also be easier to discern and identify objects sometimes.
@JayDKBGames
3 жыл бұрын
THis guys videos are the BEST tutorials he doesn't do a lot of other talk around no joking just straight to the point. I friggin LOVE his videos.
@Templar7832
4 жыл бұрын
Red Kite this is just BRILLIANT Thank you! flaming well done mate, I don't know how you do it! 10. Out. Of. 10.
@RedKiteRender
4 жыл бұрын
Thanks kindly!
@TheKenji2221
3 жыл бұрын
So many informations. It's quite impressive. If only I could watch these videos while flying in VR
@T-ya
4 жыл бұрын
Thanks for the great video. Could you please turn on the subtitle feature for me, as I am not very good at English hearings?
@candyquahogmarshmallow8257
27 күн бұрын
Very informative bro, I'm still coming back to this video while trying to master the tpod
@starfleethastanks
4 жыл бұрын
Raven One Mission 8 has been giving me trouble. After this video, that Grisha's hosed!
@RedKiteRender
4 жыл бұрын
Go get 'em!
@noisytwit
4 жыл бұрын
I was sure the default load out didn't give us a FLIR on M8?
@starfleethastanks
4 жыл бұрын
@@noisytwit It did for me. But I keep trying to be smart and use the pod to avoid the awkward Mav slewing, which requires the TDC to be depressed for some reason. Problem was I couldn't see shit and was fumbling with the mouse because I didn't fully know the Hotas controls.
@noisytwit
4 жыл бұрын
@@starfleethastanks you can disable realistic slew in the special page in settings under the F18 and you should be able to slew the MAV then without holding TDC depress. Taking out the Grisha for me wasn't too bad. Taking out the fastboats with the rocket showever was a pain, could not see those at all! Though I did do the mission the other night whilst we had the white NVG so with green it may be easier to see them.
@starfleethastanks
4 жыл бұрын
@@noisytwit Wait, is it green again?
@AndriyMisuyrak
4 жыл бұрын
This tutorial was needed !
@Nate-ip4qo
4 ай бұрын
This is such a good video. There's the normal stuff that's in most tutorials then there's the 10000IQ shit like the A/A flir usage or that HARM TOO interaction. Thanks a ton, man. This was really helpful.
@lotnylotny671
4 жыл бұрын
I'm 400. You make very good tutorials. You speak slowly, clearly and calmly - this is important for people with poor English :)
@prayong64
4 жыл бұрын
Absolument fantastique le tuto...Merci
@omarselim6281
Жыл бұрын
Hey Redkite, just bought the Hornet and Supercarrier in the Christmas sales and just getting to them now. Thank you so much for these! You should make a training campaign for the hornet mate. I'd buy it tomorrow :)
@inuit2winit
4 жыл бұрын
An excellent video for a hornet driver returning after a long break (and perfectly timed, to boot), thanks!
@wsd810
11 ай бұрын
@redkite seems like I cannot get the pod to slave to impact point on CCIP. Any suggestions? Great Video!
@bartbroekhuizen5617
3 жыл бұрын
@RedKite, what i noticed is that the TPOD LonLat is only 6 digits, is it possible to have a more precise LonLat (8 digits) to send to the JDAMS / JSOWS, or will the TPOD send a 8 digit LonLat when you designate a target? This way you get more accurate hits at long distances.
@S.Figur-the_real_one
2 жыл бұрын
Many Thanks. I was so frustrated when after a long time in VR I couldn't get along with the Hornet because of the pot. I'm training that right away and give thumbs up for this calm and very good tutorial. Thy vm ^^
@eamonnw
2 жыл бұрын
07:12 great video, I'm pretty sure only the horizontal lines can be used as metersticks. Confirmed page 469 of the manual. Once again great video thank you sir
@Exiler652
4 жыл бұрын
WOW! What a load of information, will definitely give these a go tonight. As is with any training, you will only memorize it if you do it. Thank you RedKite :)
@swiftplus175
3 жыл бұрын
At 7:15: The meter stick can not be "any" leg, only one of the two horizontals can be used for any distance measuring according to the meter number on the screen. The vertical ones in the TGP always show different distances, depending on how steep or shallow the TGP is looking at that moment. Similar to the flashlight effect. You can also see the reason for difference, if you look at the North direction cross top right corner, which is represented paralell to the ground in the display, in kinda 3D. Look at it at 6:45, the South-North arrow seems to be much longer, because you see it broadsided, the East-West arrow seems much shorter, but is is the same size, only tilted. Also see A-10C DCS manual page 337: "This numeric, when visible, displays the relative ground distance covered by the right half of the crosshair"
@falanglao01
3 жыл бұрын
ED and the 3rd party developers should pay you, mate... DCS can be quite frustrating for a casual on/off player, the tutorial missions and manuals if these even exist are quite unsatisfactory, stuff gets changed frequently, which in itself is good as they improve and add things but without guys like you I'd have given up.
@tinohax4550
3 жыл бұрын
cannot slew, no im not atrk or ptrk and diamond is on the chosen mdf......... edit: spend 20 min trying figuring it out ctrl+f (slew) here in comments showed other person with same issue and redkites solution " tdc depress" worked edit2: now the stupid pod is lock in looking back inside itself in a "stored mode"............ edit3: im just dum my "target" was behind me,, havent played dcs in 2 years having to re-learn and learn for the first time all these things.....
@JohnnyJiuJitsu
3 жыл бұрын
This must be the updated video I was asking about in the laser guided bomb tutorial from 2 years ago. *Gets out pen and paper. No, I'm going to bed. I'll save this for tomorrow :)
@godseykj
3 жыл бұрын
Fantastic buddy. Finally put warheads on foreheads with help from this video.
@hilaigofast1053
3 жыл бұрын
A veritable firehose of information, all good stuff. I know how I'm spending the next three days.
@vandaahl1400
2 жыл бұрын
I wish I found this one earlier... Thx a bunch for a spot on tutorial. Very informative and easy to understand.
@lowisao
3 жыл бұрын
What do you guys think that Commander Fravor saw in the California coast in 2004? I absolutely cannot wrap my head around it, and it has been tormenting me since I heard him in a podcast a couple of weeks ago.
@sterlingarcher4989
3 жыл бұрын
Redkite videos - the Chuck’s guides of KZitem.
@arzhangsadeghi
2 жыл бұрын
Hi what is the difference between dashed and solid target diamond in ATFLIR ? Most of the times when try to lock on A/G targets I get dashed diamond.
@mrbsimulacionaereayvrramos8520
3 жыл бұрын
For when campaigns in Spanish even if it is only the texts of the radio messages? Spanish is not a dead language, it is one of the most widely spoken languages in the world!
@racingsfun
3 жыл бұрын
It's the voice of sean harris in the late movies mission impossible. lol Redkite you should watch the movies. You sound just like the bad guy in the film.
@JSpidey
4 жыл бұрын
I can't see my own laser marker or designator while using NVG's.. why is that?
@reorg
3 жыл бұрын
Ok, I'm new to dcs.. .so can you please explain all the the word "The"
@matthewmcgee
2 жыл бұрын
Fantastic video! I wish I could give you more than one "like". :)
@SPFLDAngler
Жыл бұрын
Really pisses me off that there is no tutorial in game for this. I could not figure it out at all on my own it was so fucking frustrating. What is wrong with ED?
@8BitThoughts
4 жыл бұрын
I thought I had the flir pod down pat but I learned a lot from this lol
@benben2846
4 жыл бұрын
Great tutorial ^^
@benben2846
4 жыл бұрын
yep i editing with openshot yout YT, and step by step, with the summery i make tuto "in french" on word with comment and images^^ ,so i'm french , but i inderstand step by step all the updates ^_ ^ There is everything for the Tpod on your YT tutorial, Thank's very much !!
@Freeflyer91
3 жыл бұрын
Great video thanks. It's cleared a few things up for me :)
@starvinmarvin7964
3 жыл бұрын
Jesus I need to take a course just for the tgp. Going to take some time to get all of down for sure.
@johanterblanche4988
2 жыл бұрын
Great video, you're detail and calm explanation helps a lot
@satanicdude
2 жыл бұрын
8:23 How do I switch from point/area mode to slewable mode ?
@alvarodelaorden8901
3 жыл бұрын
truly a masterpiece you got here, sir. Much appreciated.
@mjuloski
3 жыл бұрын
Best video I've seen on that topic - Congrats ! - Thx
@Zatracenec
3 жыл бұрын
Excellent video as always. Thank You.
@stevegriffiths4954
Жыл бұрын
Spot on ! 👌 very informative💥👏👏👏
@robkelman4704
Жыл бұрын
Another awesome video. Thank you!
@Detr0y
4 жыл бұрын
Okay when I click the bell icon, it tells me "This action is turned off for content for kids." This isn't for kids tho?
@RedKiteRender
4 жыл бұрын
Huh... Double checked, the video is not set to kids, and I've been able to use the bell with a different account. Sounds like youtube Goofing up (again!) Try it again in a new tab.
@dnavarro0523
3 жыл бұрын
14:45 I think that is far from primitive my friend lol good video
@schweizerluchs7146
4 жыл бұрын
Great tutorial Red!
@icarebecozudo
3 жыл бұрын
learned a lot, and with great pleasure, thank you!
@yurikirsanov8763
6 ай бұрын
Best guides ever!!! Thank you!
@ex4lt341
4 жыл бұрын
I am watching every of your tutorials. I don't even have DCS, it's just so well done that I like watch it :D
@RedKiteRender
4 жыл бұрын
Thanks for the kind words! (DCS does have a fair bit of it for free, with the simplified Su-25T being available if you want to try it out though!)
@phil73805
3 жыл бұрын
A world class video! Thank you!
@marczamp4737
3 жыл бұрын
This was really well put together, thanks sm
@bitboydcs9825
3 жыл бұрын
Outstanding tutorial, thanks for sharing.
@DoomOfConviction
4 жыл бұрын
Nice to still hear that shit aint implemented jet xD
@JerDog1984
3 жыл бұрын
Excellent. Thanks RedKite!
@carpadeus
3 жыл бұрын
Really a complete and great tutorial, thx.
@MoodOnTele
3 жыл бұрын
Hello, how do I get the flir to Grey scale and not green
@dixonjamesofficial
4 жыл бұрын
Can you do this for the new A-10C
@dereklchung
4 жыл бұрын
Thank you. This is brilliant.
@paul1e
2 жыл бұрын
how do you move the FLIR camera ?
@Tyetheberious
3 жыл бұрын
Great video, very easy to follow.
@FlyingDeacon
3 жыл бұрын
Brilliantly done. Very helpful
@ryanw5584
2 жыл бұрын
Great video. Underrated for sure
@sushieduardo
4 жыл бұрын
Best in depth view of the system
@JoJo-vm8vk
3 жыл бұрын
As I'm writing, it seems that "RAID/ FOV" HOTAS command with SOI on Litening pod doesn't work when AGM-65E is selected :-(
@RedKiteRender
3 жыл бұрын
Yes, that's also true for the F mavs as well, I believe it is correct behaviour, so I'd suggest setting up the target before opening the page.
@RTSchramm
4 жыл бұрын
The cage and uncage button didn't toggle laser track mode and the Raid/Flir button also didn't work for the FOV or Toggling of the CCD and IR camera, but all of the controls were mapped correctly and the FLIR was the sensor of interest. Any suggestions?
@AceLain
4 жыл бұрын
It is because you have a MAV or a HARM selected, for wathever reason the MAV/Harm have priority over the FLIR even is it is SOI. I recall having seen Waggs saying it was on purpose on the DCS forum a while ago.
@mrpawno4955
4 жыл бұрын
Nice and professional.
@TheSkipjack95
4 жыл бұрын
As usual a very detailed and easy to follow guide. I'm just confused as to the difference between a TDC designate and a point/area track. TDC designate seems to feed the coords into the INS while a track just has the pod track something ?
@RedKiteRender
4 жыл бұрын
Yes, in most cases the pod will automatically be designating (for example if you slew off of from a WPDSG the designation will follow) But, if you go into snowplow or VVSLV and then into area track you won't be designating a point yet. In this situation you're tracking the ground with the pod, but it's not passing any co-ordinates onto your weapons system. Pressing TDC Designate will then set the designation and start passing on the pod's target.
@alheeley
3 жыл бұрын
Very nicely explained! 02:06 - whats the keybind command to cycle through tracking modes?
@RedKiteRender
3 жыл бұрын
Explained later, but Sensor control switch towards the display with the flir on whilst already SOI. Often referred to as SCS FLIR.
@AceLain
4 жыл бұрын
An amazing video, really good job ! I have a question thought, do you know how to shoot a AGM-54E in PTKR ? its look like the TGT doesn't update while the PTRK is moving, so the MavE cannot lock the laser because the uncave slave the missile to the TGT. I realized it in one of the "Raven one" mission and I was looking for a workaround.
@EPOCCH
3 жыл бұрын
I'm getting so frustrated with this. Whenever I press uncage it switches the pod to a different mode (I believe lss) and unlocks my target. Is there anyway I can unbind this?
@Uollie
3 жыл бұрын
Cage/Uncage on the throttle is the input to switch to LSS, you're right. Are you trying to undesignate instead? That would be the same button that is used for nosewheel steering. But yes, you can unbind the LSS, but it will also unbind cage/uncage as they're the same button.
@ericandi
2 жыл бұрын
At around 3:07 in this video, what was that object was panned thru the view of the targeting pod camera? It looked like an object was only about a a foot in front of the camera. It looked like the metal surface of a missile or bomb. The object just quickly panned thru the view. Did you move the camera so it panned across one of the munitions attached to the plane?
@RedKiteRender
2 жыл бұрын
It's something loaded on the wing, can't remember what. What's going on is the pod's not being slewed around, its following the ground. However the plane is in an oribt, and i was adjusting the angle of the wings to maintain distance, so it moved into shot.
@JoJo-vm8vk
3 жыл бұрын
Best Hornet Litening pod tutorial ever, amazing work 👍🏻👍🏻👍🏻
@williamhall2386
3 жыл бұрын
God your videos have the best clarity, organization, and flow..... you make these modules worth really digging into
@chrisknight5810
3 жыл бұрын
Great Tutorial, well done. Thanks for your time and explaining the pod. I didnt know several points I found very useful.
@mrsatchie
2 жыл бұрын
Coming back to this after a year (and noob on DCS at that time) has great value! Thanks again, great video..
Пікірлер: 243