For the silicone seal, I recommend doing 4 tiny dots by putting a tooth pick into the silicone tube and tapping each of the 4 corners. It's more than enough and you don't risk it creating a gap for worse liquid metal contact.
@cstrike105
11 ай бұрын
Great work, Delidding. Still using this processor since 2014.
@300maze
Жыл бұрын
the degraded underfill is kind of concerning, this 3770k might not live for long
@sldkjh
Жыл бұрын
My 3770 non K could do 4,5 GHz undelidded but sanded down without a lot of extra voltage, maybe 0,11 volts more than normal. It would run Cinebench R20 very stable with a max temperature of about 60c if I recall that correctly. I had a Dell server tower cooler on it held down with 2 strips of folded aluminium. Too bad my cat took a pee into that computer and the CPU and board got ruined... A 14% all core and single core overclock on a non K is not bad at all. Good luck with the channel and all your mods!
@quintit
Жыл бұрын
Can you Liquid Metal any cpu? Or are there some types with different metals for the die, that won’t be compatible with the liquid metal
@b0ne91
Жыл бұрын
When I first delidded my first 4790k ever (I got it for 25€ because it was "overheating" - the TIM had dried up). I had the same delidder, same LM and even the same UHU silicone. I've since delidded many 115x CPUs and the silicone has dried up, so be careful with that.
@СашаИванов-у2ц3с
8 ай бұрын
Тяп ляп и так сойдёт! Работает же! И для этого нужен был дорогой немецкий скальпатор???Ха-ха-ха-ха.
@VanishingPoint96
Жыл бұрын
The paste underneath the IHS looks about like what my 3770 non-k looked like when I delided. Dry as rock lmao. Should drop temps nicely. You may also want to lap the IHS to see if you can bring C2C delta down. I'll test with mine in a few days
@ironphilly2366
Жыл бұрын
The deliding tutorial told me nailpolish would be needed somewhere
@CmdrSoyo
Жыл бұрын
There are no exposed components on the front side
@firinmahlazorz
Жыл бұрын
Who else wants to see this guys Factory
@Ogk10
Жыл бұрын
I did mine in a table vice and a bit of hammering
@_specialneeds
2 ай бұрын
The heat spreader is aluminum. I thought liquid metal had gallium in it, which destroys aluminum?
@CmdrSoyo
2 ай бұрын
the heat spreader is nickel coated copper
@_specialneeds
2 ай бұрын
@@CmdrSoyo oh cool if that's the case, I'm totally doing it.
@grindererrofficial3755
Жыл бұрын
Hi man, you have extra bad luck in silicone lottery. I have i7 3770k on air (noctua dh15) with stats like this : 4,9 ghz - 1,340 -1,35V - max temps around 65-68C in cinebench 20. Tried several kinds of LM, all wokred same, temp differences in margine of error. Mobo msi z77 dg 55 and MSI Z77 MPower. in games temps was in 65-74C. Edit : 4 sticks of ram 1866mhz (just basic clocks) - 32gb
@baseballboy1212
7 ай бұрын
Damnit now my ihs is on backwards
@Vi_OC
Жыл бұрын
Next step direct die?
@bobbyboygaming2157
Жыл бұрын
Do you have a discord?
@manISnoGOD
Жыл бұрын
What mobo you using?
@sldkjh
Жыл бұрын
That Z77 board is mentioned in his previous and this video. 😉MSI Z77 M Power.
Пікірлер: 24