4 years later your video is still helping people out. This was the exact info I was looking for. Straight forward directly to the point and no useless bullshit. Perfect!! I Thank you very much!!
@MrPragmaticLee
8 жыл бұрын
Thanks, your method worked great.
@lexuslx450
6 жыл бұрын
thanks for the info. :)
@alfsoftphilips
5 жыл бұрын
Do you know how I can increase the voltage to 13.8v???
@6harm9
3 жыл бұрын
If you need higher voltage m.aliexpress.com/item/1005001636280545.html?pid=808_0000_0109&spm=a2g0n.productlist.0.0.28877d0fn8C4d0&browser_id=a78f0a3d41a34b938a6dab09a9805c7b&aff_trace_key=6418f9d7786a4298a83ad435b23183b9-1610099971492-09014-UneMJZVf&aff_platform=msite&m_page_id=176e16ff65426a4a2fe1dfa8103a114bf02fe12a83&gclid=&_imgsrc_=ae01.alicdn.com/kf/H254c15d5ec9b4b8d8a69d7bf2e8e00d72.jpg_640x640Q90.jpg_.webp
@TheSageDad
8 жыл бұрын
Do you have a picture with all the pin-outs? I've been trying to find one but can't seem to find it, and the resolution of your vid was a bit low for me to read your paper.
@gorillaau
7 жыл бұрын
TheSageDad Im not sure if you are still looking, but the pins you need for the project are the three on a diagonal from the top right hand corner. One in the corner, then down a row and one to the left, and again to the right. the switch goes between the middle pin and the outer two.
@miken8obu478
4 жыл бұрын
@@gorillaau The Dell DPS-500CB power supply comes from a Dell server. It only has a 12 volt output, and does not have 3.3, or 5 volts on any output. It can supply approx. 41 amps @ 12 vdc. In order to turn the supply on, there are two sets of pins that need to be shorted. The two heavy clips to the left and right are the main 12 volt outputs. The pins in the center are 6 across, and 4 down. we will start at the top left and go down, A, B,C,D, and go across 1,2,3,4,5.6 Short A5 to B5 and C4 to D4 this pin out works too 73
@ragher6999
3 жыл бұрын
@@miken8obu478 Any idea if this PSU has any means of health monitoring? It would be nice to read current output, voltage, temperature, etc...
@hs6ngm
3 жыл бұрын
13.8v
@6harm9
3 жыл бұрын
Use step-up module, it is cheap way to increase voltage.
@6harm9
3 жыл бұрын
Like this m.aliexpress.com/item/1005001636280545.html?pid=808_0000_0109&spm=a2g0n.productlist.0.0.28877d0fn8C4d0&browser_id=a78f0a3d41a34b938a6dab09a9805c7b&aff_trace_key=6418f9d7786a4298a83ad435b23183b9-1610099971492-09014-UneMJZVf&aff_platform=msite&m_page_id=176e16ff65426a4a2fe1dfa8103a114bf02fe12a83&gclid=&_imgsrc_=ae01.alicdn.com/kf/H254c15d5ec9b4b8d8a69d7bf2e8e00d72.jpg_640x640Q90.jpg_.webp
Пікірлер: 12