Well there goes my plans on wanting to change my thermal paste!(Thanks for making it easy Dell......)
@baldhead69
3 жыл бұрын
I wanted to use conductonaut, but after this video i see that are very complicated / laborious.
@dant4774
3 жыл бұрын
ikr
@smokegames1179
3 жыл бұрын
i have it changed for $18 here in the philippines lol totally worth it now it runs 57c while mining lol
@GT-tn2nx
3 жыл бұрын
@@smokegames1179 if you don’t mind me asking, where specifically in the Philippines?
@cholo1554
2 жыл бұрын
@@smokegames1179 hello sir where in philippines did u get urs fixed ty
@justinleong2589
3 жыл бұрын
If you are using this video as a guide, you should applied thermal paste ON the cpu/gpu Integrated Heat Spreader (IHS) and not on the heatsink itself. Thermal paste should not include the green area, only CPU/GPU ihs should be covered by thermal paste. now since you applied to the heatsink which already more than the area of your cpu/gpu ihs, your thermal paste will spead out of the green area to the board. The green area are there is to prevent incase you applied too much thermal paste it wont spread to the board when the cooler is mounted. it is a bad practices as it can cause short circuit and fry your motherboard. It can be even worst if you are using liquid metal thermal paste.
@serginho123ify
4 жыл бұрын
Best g7 video maintenance ever. Repaste solved my annoing throttling during The games. Before Repaste, even with undervolt, my temps was UP to 95 degrees. After, my i7 8750h beat 73 - 77 degrees. Thks and greetings from Brazil
@l.968
4 жыл бұрын
opa cara, vc tb trocou os thermal pads? se sim, pode me dizer qual comprou?
@wingwong6400
4 жыл бұрын
You have to limit that ridiculous 4.2 Ghz turbo boost as well. A simple undervolt wont help much by itself. Ive mine at 3.2 max turbo boost on all cores and a 130.9 mv undervolt on the core and cache. Getting 70C-80C while gaming with that configuration. I might re paste next idk
@jefersontorres-guitarfaqs2892
3 жыл бұрын
Can you PLEASE tell me what is the corret keyboard flat cable conector for Dell G7 157588? I´ve been searching for it for a while, Dell support is unable to tell me, they want me to replace the whole motherboard!
@awstech6217
5 жыл бұрын
GUYS ! ANOTHER G7 VIDEO WILL BE OUT !! IT WILL BE ABOUT HOW TO PUT A DUST FILTER ON , AND HOW IT WILL IMPACT PERFORMANCE!!!
@lordkrythic6246
4 жыл бұрын
WHY ARE WE SCREAMING?!
@awstech6217
4 жыл бұрын
@@lordkrythic6246 I DONT KNOW WHAY WE EE SCREAMMIN
@GabrielRodriguez-um8fi
4 жыл бұрын
What about keyboard replacement for this model?
@awstech6217
4 жыл бұрын
@@GabrielRodriguez-um8fi you need to buy it from dell . if the keyboard died by itself you can get replacement if you have warranty
@GabrielRodriguez-um8fi
4 жыл бұрын
@@awstech6217 Oh actually i was wondering if you can make a video on how to replace the keyboard on that particular machine.
@eagle-akshay
9 ай бұрын
I just want to appreciate this video, I followed this guide and reapplied the paste on my G7 it was not an easy thing to do. Not recommended for rookies to say the least. The only problem for me was one of the screws to remove the heat pipes was very tight, I almost stripped the screw and lost all my hope that it would never be possible to apply a new paste on my pc anymore. Luckily I gave it a one hard force push onto the screw and turned, and voila it worked. So this is the tip I give you. Be careful not to strip the tight screws, push onto the screw hard and turn, but also make sure you dont break the PCB by putting a counter pressure from beneath to distribute the force that you are putting on the screw
@KingCez100
3 жыл бұрын
Just make sure you have up to five hours and a lifetime of patience for this.
@PedroPimentel
Жыл бұрын
Thanks for the video, at first I was hesitant, but ended up doing it. It wasn't that hard, just broke 2 parts and cut my arm, but the cooling improved a lot
@s.khan5805
5 жыл бұрын
This video deserves more than a million views
@calenmcnickles9333
3 жыл бұрын
Great video, thanks for the help. It ended up taking me about 2.5 - 3 hrs. PC just started so fingers crossed this helps my performance.
@raumyasarkar2092
4 жыл бұрын
Thanks for the video. Basically it gave me courage to go through the procedure. Used gc extreme and temps dropped from 99-->69-70
@awstech6217
4 жыл бұрын
Nice seeing you being successful!
@roguegen5536
4 ай бұрын
My old laptop is starting to show its age. I should probably clean it. Dell: Good luck lol
@tiggerie345
4 жыл бұрын
I’m getting my paste and tools on Sunday, studying your vid closely
@awstech6217
4 жыл бұрын
Best of luck !! I also reccomand having the service manual besides you
@GabrieLRPL13
3 жыл бұрын
Have you done it right?
@ladymichellesesoadventures8820
4 жыл бұрын
I thought I could take this apart and replace my keyboard but now I doubt I would be able to keep up with all the screws. I know I can't afford out of warranty repair so now I'm stumped as to what to next. Thank you so much for the video tho.
@FerdinandBuzon
2 жыл бұрын
Just a tip, put the thermal paste on top of the processors. Not the heatsinks.
@gummi4977
5 жыл бұрын
This is why some youtuber said that better to choose G3 rather this series for easier upgradable components. But i must say this is more look appealing & solid with some of the cover in entire board.
@awstech6217
5 жыл бұрын
Yes, this laptop is a tank
@RafaMagoo
Жыл бұрын
Thanks! I managed to change the thermal paste. Saved me 😂
@felipechaves6100
3 жыл бұрын
Ok I just removed the first screw and opened it up. Watched this video and now I’m putting that part back up. Fuck this 😭
@xuhnenfels0935
2 жыл бұрын
Oof
@woneric3655
5 жыл бұрын
Awesome man, thanks your video i can change my dell' 7577's thermal , the temp was reduce alot with undervolt
@awstech6217
5 жыл бұрын
No problem !
@drewbadwolf5182
5 жыл бұрын
way easier, just pull off the heatsync i believe it sb open once you open your panel
@awstech6217
5 жыл бұрын
@@drewbadwolf5182 sb ?
@Phibby27
5 жыл бұрын
this helped me so much thx
@ThePavanMetal
10 ай бұрын
Thank you so much for the video, i changed my thermal paste today!! it was not easy but not so hard tho!
@worldanh
5 жыл бұрын
I have issue of putting the ribbon cable for the keyboard in place , could not get it to contact so keyboard isn’t working.
@makdejesus6834
4 жыл бұрын
Is there a video on how to re install the battery connector?
@jackkemp7256
5 жыл бұрын
Johnny 5: "No disassemble!"
@darknight602
3 жыл бұрын
Fans going hard and no display afterwards, any advice. Might have missed something putting it back together. Edit: just needs to cycle a few times due to the bios config etc
@Zstray
4 жыл бұрын
Just disassembled, redid thermal paste. Put back together and no video, fans run full speed... The radiators were both completely full of hair and dust, no air had been moving and the customer said games were very laggy. I'm wondering if the design of the heatsink causing the board to flex slightly when reassembled has caused a crack when putting back together. Edit: After reseating RAM 3 more times it gets good POST. I had not even removed the RAM during the initial process.
@adsmiliface4677
4 жыл бұрын
When you remove de little battery the bios stops getting power because of that it cycles a couples of time when turning back on
@Marctechtktor
Жыл бұрын
Muchas gracias, acabas de salvar mi pc
@benoz11
3 жыл бұрын
In case anyone was wondering, that's 54 screws to get to the CPU (58 in the video, I was missing 4 on mine randomly despite never once opening it???) My full instruction list: Unscrew back cover Remove back cover 3 x battery screws (m2.5x6 screws) unplug battery remove battery unplug 5 cables near where battery was unplug HDD 4 x HDD screws (3 tier size) remove HDD 1 x SSD screw (short and fat) remove SSD unplug RTC remove RTC 1 x screw from CRF (m2x3 screw) remove CRF and plastic cover 1 x screw on EDP (m2x3 screw) remove edp cover unplug whatever the fuck it was covering (LIFT) 4 x flat screws along top Remove back top section (just lifts up when wedged) unplug cable near left fan (wtf is this?) 19 x screws around plastic cover (m2.5x6 screws) - 10 top half (1 in each corner, 2 near each fan, 2 sets of 2 along top) - 3 in middle near battery - 6 bottom half (5 bottom, 1 near ssd) 4 x screws under battery (m2x3 screws) Pry entire bottom plastic case off 2 x screws on EACH fan (m2x3 screws) remove 1 plug from each fan remove 1 plug from other side near top of left fan 7 x metal screws from MOBO (3 on left 4 on right) remove little metal cover that 2 screws were in on the right Wiggle the mobo out, use the other side to push a little 6 x screws in the center holding the heat sink on IN ORDER (m2x3 screws) remove heat sink TOTAL SCREWS: 4 x weird HDD screws 16 x m2x3 screws (little baby) 4 x flat screws along top 1 x unique short fat screw (SSD) 22 x m2.5x6 (3 battery, 19 around plastic cover) 7 x metal screws (mobo m2.5x2L)
@terrellm3898
Жыл бұрын
Q
@s.khan5805
5 жыл бұрын
This video helped me a lot
@awstech6217
5 жыл бұрын
No problem !
@frango163
4 жыл бұрын
Just bought some gelmaker to use on my g7 but this video got me really scared...
@petecalhoun6205
3 жыл бұрын
Thank you for this video!
@JSuparman
3 жыл бұрын
Thanks for sharing, Sir. This helps me.
@brandodelfuego4172
5 жыл бұрын
how do you clean fans and heatsink ?
@liddolwiddol
4 жыл бұрын
I need to replce the keyboard on mine, (the A, and 1 keys are busted) but i did not see him even touch that part :C maybe i just missed him setting it aside
@user-oc9ch5jh1d
3 жыл бұрын
@AwsTech hmm, idk my laptop error or what, but after repaste and assamble my laptop component, my laptop can't be charged, why???
@l.968
4 жыл бұрын
hello, big thanks for the video! what thermal pads did you use to replace the old ones, and what was it's thickness?
@awstech6217
4 жыл бұрын
i use the ones came with the replacement heatsink dell sent me
@KingCez100
3 жыл бұрын
Did you skip the part on the heat sinks where you stuck new pads that you pull the tabs on 13:26 ?
@victoramaral717
5 жыл бұрын
Poderia mostrar como retira o teclado dele?
@hoangphuc17457
3 ай бұрын
How about the thickness of 2 color type thermal pad, please!?
@datsu2165
3 жыл бұрын
How to clean the fan
@travisjoseph5680
3 жыл бұрын
my friend has this laptop and needs to repair it because his child bent it and broke the piece connecting the monitor and main body. what is that piece called?
@danieljespersen89
5 жыл бұрын
Was the new cooler an upgrade one Dell supplied to fix heating issues? Or was it the stock one to replace your bent one? If it is an upgrade I definitely need to get one.
@awstech6217
5 жыл бұрын
My old cooler was damaged . Idle temp was high. . they sent me a replacement
@williamgoring7605
5 жыл бұрын
I was terrible I shot do the whole day I need an even turn it on and see if it worked
@Tongxi222
4 жыл бұрын
What screwdriver mode did u use to umscrew m2x3 screws?
@jefersontorres-guitarfaqs2892
3 жыл бұрын
Can you PLEASE tell me what is the corret keyboard flat cable conector for Dell G7 157588? I´ve been searching for it for a while, Dell support is unable to tell me, they want me to replace the whole motherboard!
@bilalmehmood8017
4 жыл бұрын
Hi. Kindly made a video on Dell G7 Hinge replacement.
@jonyblizz
4 жыл бұрын
Well this job most be done by all users I think. I have a G5 with GTX 1060 and i7 8750h internal disassembly it's the same. After a year the original thermal compound stopped working and deploying 95° C while gaming. After re pasting with Kryonaut I managed to play between 65° - 80° C.
@awstech6217
4 жыл бұрын
Great news ! Well that laptop is long gone for me . I bought a thin and light ryzen 5 laptop and sold my g7 . It was horrible . I don't ever want to buy a gaming laptop again
@stg2913
4 жыл бұрын
Hey, just yesterday my G7 kept saying something along the lines of “usb power surge” repeatedly nonstop, even after restarting. After a few minutes the entire computer died and will no longer boot up. The two USB ports on the right side had mice receivers in them and now smell like burnt plastic. Dell is fixing it for free, but in the mean time, anyone know why this may have happened?
@user-uo9ds9wk3w
3 жыл бұрын
I have a strong conviction that the first thing to do is to disconnect the battery! When you start disassembling a laptop with a connected battery, it's not professional.
@sir7544
3 жыл бұрын
That literally doesn’t matter. I took everything apart without disconnecting the battery. It’s fine.
@marsellusbrel
3 жыл бұрын
thank you, very useful :)
@shin1869_
5 жыл бұрын
Which one there is the graphics card XD?
@betty755
5 жыл бұрын
yea my laptop running at 100c and throttles. got same g7. I would not use dell thermal paste though
@awstech6217
5 жыл бұрын
Ya , i used mx thermal paste
@jaydattchampavat6387
5 жыл бұрын
AwsTech what about those liquid metal paste, I saw a LTT video in which linus gets 20C lower. Not a dell g7 of course.
@awstech6217
5 жыл бұрын
@@jaydattchampavat6387 ya , I killed my hp ryzen 7 laptop with liquid metal . If you go to my channel I used to have a ryzen 5 laptop, then returned it for a 7 . Then repaste it with liquid metal but killed it .
@sakibsarwat5064
5 жыл бұрын
Why didn’t you added the link of ncs song links
@capulinamix2
5 жыл бұрын
Hey I just got the same laptop, do I have to replace the entire heatsink or can I just repaste it with the better compound? Thanks for taking you time to do this video
@awstech6217
5 жыл бұрын
You can just repaste it . my heatsink was bent
@awstech6217
5 жыл бұрын
buy it !! i love it . but repaste it
@weiss3820
Жыл бұрын
I have DELL G7 7588, when I plug the AC cable adapter the laptop power on automatically. I formatted the system partition and installed windows 10, check bios settings, everything tou can imagine I did it, I change also the laptop battery for a new one still the same issue. Last week I turned off the laptop, after ten seconds it starts by itself on battery or AC cable adapter plugged. I don’t know what to do. My laptop is out of warranty. is it a power button problem. Thank you.
@jerryohhh
4 жыл бұрын
please keyboard replacement on Dell G7
@werty2193
5 жыл бұрын
If my touchpad is having some trouble do I need to take everything out to clean it or to see what is the problem? ._.
@awstech6217
5 жыл бұрын
If you have not taken it apart or gave no experience , get new drivers. If it wont work . Call dell
@randomkidwholikedthisonech3964
3 жыл бұрын
After repasting the computer and cleaning out the dust I still get high temps, anyone know why?
@johnchausow4857
5 жыл бұрын
How did you talk customer service into sending you a new heatsink??? I am having the same issue but don’t want to send my laptop back. Did you specifically tell them your background and ask for one? Did they put up a fight over it. I take it you voided your warranty by doing this?
@awstech6217
5 жыл бұрын
No , I told them I am a nerd with tech and they said ok sure
@edmonda.9748
4 жыл бұрын
@Aws Tech was your G7 still under warranty when they sent you the heat sink?
@awstech6217
4 жыл бұрын
Yes
@jamealbrown
5 жыл бұрын
hey did you clean off the thermal paste or it didnt come with any thermal paste on the heatsink and how far did you have to go to get to the speakers cause my speakers are making funny noixe s i plan to fix it so how far did you have to ho to reach the speaker
@awstech6217
5 жыл бұрын
Get the palm rest out then you should see speakers . I got rid of stock thermal paste
@jerryohhh
Жыл бұрын
I have a same laptop but my issue the laptop screen are flickering while I'm browsing using 2nd touch screen monitor any have idea or help can solution my problem?
@daddy5245
5 жыл бұрын
Everything is fine except the way you put the thermal paste, just put small pea size paste on cpu & gpu. I never heard anyone saying to apply thermal paste directly on heatsink.
@awstech6217
5 жыл бұрын
I get 40 idle now so I think I did good
@s.khan5805
5 жыл бұрын
This laptop is still very good for performance and personal use
@drewbadwolf5182
5 жыл бұрын
yea if your having heat issues intels extreme tuning utility has helped me drop 10 degrees c undervolting what i am not using
@s.khan5805
5 жыл бұрын
Thanks
@c0r5e
5 жыл бұрын
Do u need to fully teardown the laptop to access the CPU and GPU or u just puttin the whole disassembly process
@awstech6217
5 жыл бұрын
Need to take it all apart
@c0r5e
4 жыл бұрын
AwsTech :(
@DonJetblack00
5 жыл бұрын
That damn music man... Fack!
@christophersaenz7605
3 жыл бұрын
I want to do this but I’m afraid to do it. It will be my first computer to take apart. I already got the new heat sink but in really scared... I’m trying to work up the guys to do it
@stavanvyas8975
3 жыл бұрын
How did it go brother??...did you do it?..tell me your experience..I am also scared😬
@xuhnenfels0935
2 жыл бұрын
I bet you fucked up 🤣
@christophersaenz7605
2 жыл бұрын
@@stavanvyas8975 I did it! Succeeded and now my computer works amazingly! Now I just gotta do the keyboard :/
@christophersaenz7605
2 жыл бұрын
@@xuhnenfels0935 nope! Did really well and changed heat sync as well as the thermal paste!
@ssbutiro9159
2 жыл бұрын
Is anyone having trouble unscrewing the hdd. For some reason I cant get mine out
@blackplaguez5771
4 жыл бұрын
do you have to take off all the screw to get to like the very back
@awstech6217
4 жыл бұрын
Yes
@rrcoura
4 жыл бұрын
Is it NVME 2280 ?
@burakcandemirylmaz2669
5 жыл бұрын
Hey man , nice video! Want to ask you that how much it affected your thermals , because I have a G5 also and my thermals on cpu side is like hell breaks down if its helps a lot like 5 degrees Centigrade it will be the next thing to do for me , also I tried undervolting but it still keeps throttling in most of the heavy work or even in the games.
@awstech6217
5 жыл бұрын
Degrees -10 centigrade for me
@drewbadwolf5182
5 жыл бұрын
hey i noticed if you go to windows power settings and the advanced area, my min processor performance when plugged in was 100% so it was always clocking at 4ghz making it way overheat. i got a 20 dollar heating pad, fixed that and reinstalled windows. now instead of 90 my top is about 65-75c
@drewbadwolf5182
5 жыл бұрын
have the older g5 and was really mad about thermals
@drewbadwolf5182
5 жыл бұрын
i should clarify, on battery it was 100% of the time at full blast, now that it is optimized x20 or x30 for whatever the task is it doesnt need to be full throttled , however still can be, and gets the job done great. I would do 5%, i have seen that referenced as a good minimum and its what i used.
@guramvashakmadze6254
5 жыл бұрын
What temps do you get now while gaming/stress test? Thanks in advance
@awstech6217
5 жыл бұрын
60
@c0r5e
4 жыл бұрын
How much time did it take you and where did u get the service manual ?
@awstech6217
4 жыл бұрын
Dell website. Takes around 30min for me . Good luck tho :)
@pollomage9935
4 жыл бұрын
Do i have to dissassemble to remove keys so i can clean em i got some sticky keys?
@awstech6217
4 жыл бұрын
Yez
@MarMan-wx7sw
5 жыл бұрын
Did you just call dell support or is there a way to buy the fans separately for this laptop?
@awstech6217
5 жыл бұрын
Call
@minhphongo9443
5 жыл бұрын
I'm from Vietnam and I'm very interested in this laptop. Mind if you tell me how to get that heatsink replacement ? BTW, great great video and experience
@awstech6217
5 жыл бұрын
Call up dell
@jonnyheey
5 жыл бұрын
@@awstech6217I kinda feel like calling them when I replaced my thermal paste on mine i noticed that my thermal pads had air bubbles how did you tell them that you will do a self repair?? do you have the basic warranty??
@awstech6217
5 жыл бұрын
i have basic warrenty .
@jcampbell1070
5 жыл бұрын
Does thermal pads come on there from the factory or is that something u did
@awstech6217
5 жыл бұрын
factory, I modded the laptop so it now has a dust filter, ill be uploading it pretty soon
@mohamedalgho
5 жыл бұрын
What was the nvme brand and model that came with laptop
@awstech6217
5 жыл бұрын
toshiba
@baomusic8193
4 жыл бұрын
My fan broke.. Where to buy fan for dell g7 pls where can i contact you i have some questions. Hope you will reply i really need your help great video
@awstech6217
4 жыл бұрын
Call Dell .
@koalakook3311
5 жыл бұрын
Dell wants me to send me to send the same model to them to fix thermal issues. Does 50ish idle like you’re but gaming sometimes to 100. Thought about doing it myself but not anymore after watching this. BTW you never mentioned the results of it, disappointed. How are your temps now?
@awstech6217
5 жыл бұрын
Idle 36 degrees . And I sold my g7
@tomaspiccinelli132
4 жыл бұрын
Hello, just a question: to clean the fans do i have to dissasemble the entire pc?
@awstech6217
4 жыл бұрын
Ye
@mistersniffles4996
5 жыл бұрын
My laptop is getting uncomfortably hot, like in the 90c range, and I need to keep it for as long as i can. Im thinking of doing what you did in this video to maybe help the processor not overheat. Would you recommend paste or a thermal pad like the IC Graphite thermal pad?
@awstech6217
5 жыл бұрын
Paste
@mistersniffles4996
5 жыл бұрын
@@awstech6217 Thank you! I'm using this video to help me along with the process!
@awstech6217
5 жыл бұрын
@@mistersniffles4996 no prob!
@drewbadwolf5182
5 жыл бұрын
intel tuning utility to undervolt?
@mistersniffles4996
5 жыл бұрын
@@drewbadwolf5182 I'm using throttlestop to undervolt and I also turned off the Turboboost which I think was a major factor affecting solely the heat output of the cpu
@betty755
5 жыл бұрын
also did that happen to help with thermals?
@awstech6217
5 жыл бұрын
Yes Now at 30c
@vule8874
5 жыл бұрын
You are so clever
@awstech6217
5 жыл бұрын
Thanks
@edgardocastaneda9402
3 жыл бұрын
Do you know how to remove stripped screws? :( im desperate
@edgardocastaneda9402
3 жыл бұрын
Nothing works
@ThingsUploadedbyMe33
5 жыл бұрын
Thanks for creating this video
@awstech6217
5 жыл бұрын
Thanks for your view
@wingwong6400
4 жыл бұрын
God, this procedure gave me a headache. I'll just stick to my undervolt and turbo boost limit to stay cool haha. Also, a very simple hard drive upgrade to 2TB
@MartianProductions
3 жыл бұрын
If you don’t mind me asking, what do you use to undervolt?
@GabrieLRPL13
3 жыл бұрын
@@MartianProductions throttle stop
@smokegames1179
3 жыл бұрын
i use to undervolt and i just aid a guy to change thermal paste thermal paste made all the difference im mining now with 57c on dell 7577
@Doomfloyd
2 жыл бұрын
my laptop came with a bios update that disables undervolting. Windows update pushes intel's plundervolt bios update on laptops.
@feiliu2264
4 жыл бұрын
i will break mine when i just open that back case cover.so i gave up🤥
@shyhrk
4 жыл бұрын
God, this looks like hell to disassembly and reassembly. I've ordered thermal paste already, but this made me feel intimidated and think twice. There seemed to be a lot of screws, and I'm afraid I can't remember all of them even if I made that thing you did with the blank paper. Why is Dell: shipping a freaking gaming laptop with lower quality thermal paste--way too much of it on top of that, and made the disassembly this difficult? I guess I will not be buying Dell laptop next time if it's just going to be like this. But still, I will really have to repaste and all. I've been running this thing for nearly 3 years without repasting.
@awstech6217
4 жыл бұрын
This thing is a budget Dell laptop. I sold it 1 month after I repaste it lol
@shyhrk
4 жыл бұрын
AwsTech 150k yen is not budget at all in my opinion (;ω;) Thanks for the reply though.
@SnwwhtEI
3 жыл бұрын
You forgot to link screwdriver set
@doublebigMark
4 жыл бұрын
Dude, so you can replace the HDD slot with an SSD?!
@GabrieLRPL13
3 жыл бұрын
Yes
@TheRealMoeru
5 жыл бұрын
Jesus this looks like hell to do but I'm considering on repasting this myself, any advice?
@awstech6217
5 жыл бұрын
Be paitent haha
@pratyushsaxena8963
4 жыл бұрын
from where did u buy the heat sink
@awstech6217
4 жыл бұрын
Dell sent me one
@AtomicBleach
4 жыл бұрын
I followed this guide for the repaste job on my 7588 (8750 i7 with 1060maxq) www.how-fixit.com/laptop-repair-guides/dell-laptop/dell-g5-5587-g7-7588-disassembly-guide/ Afterward my cinebench r20 benchmark didnt see the cpu going over 75C and the highest spike I had in 3dMark was 88C. Before the repaste both the cpu and gpu were seeing temps over 100C in heavy parts of the benchmark. I used Thermal Grizzly Kryonaut (didnt use conductonaut as I had heard it can stain/pit bare copper and aluminum) and cut all new thermal pads (1mm) for the inside components. Also another neat thing is without messing with my clock speeds, or changing graphics drivers, I saw a increase of 669mhz on the gpu during the whole benchmark.
@joestar9162
4 жыл бұрын
Thanks, this video is good, but only demostrates, not explains too much.
@arabindSandrappan
5 жыл бұрын
whats the most tricky part here?Something we should pay much attention and be careful about?i saw you spend some time putting the power adaptor port back in place.
@awstech6217
5 жыл бұрын
Hmm , the video was my second time opening it, id say getting to the mobo is very annoying .
@mmarfe
5 жыл бұрын
@@awstech6217 Why are you doing it for the second time? Was it just to make the video or do you have to keep changing thermal paste?
@awstech6217
5 жыл бұрын
@@mmarfe my new heat sink came. The old one was defective . Dell sent me a new one
@mmarfe
5 жыл бұрын
@@awstech6217 what was the problem with it? I may have the same problem. Was you computer running too hot?
@awstech6217
5 жыл бұрын
@@mmarfe yes . Too hot. The heat sink is bent
@DoyleArthur
4 жыл бұрын
Sorry this is off topic. What's the song playing at 20:49? PS: Very useful video.
@kavianoa8787
4 жыл бұрын
Monody - TheFatRat
@zbrokenzt4424
4 жыл бұрын
Is the cmos that little black circle coin looking with red wired? Cause I'm having problem with overclocking and now my laptop goes blackscreen..i overclocked toomuch help?
@awstech6217
4 жыл бұрын
Yes
@zbrokenzt4424
4 жыл бұрын
@@awstech6217 can you help me. My computer is turned on but stuck on black screen. I tried "bios default and factory settings" options and it told me to restart it then it just repeated. Stuck on blackscreen again. Due to overclocked
@awstech6217
4 жыл бұрын
@@zbrokenzt4424 sorry I don't have this laptop anymore . I sold it right after this video . It was bad laptop
@zbrokenzt4424
4 жыл бұрын
@@awstech6217 So you don't know how to fix it?tech..
@awstech6217
4 жыл бұрын
@@zbrokenzt4424 sorry as I don't have this laptop anymore
@rkorabbit3811
3 жыл бұрын
having a weird problem and not sure why after finishing all of this my laptop is not starting properly , fans are running max speed and the screen is not turning on and I'm scared that i did something wrong
@darknight602
3 жыл бұрын
I have the same issue, figure it out? Guessing something not connected
@rkorabbit3811
3 жыл бұрын
@@darknight602 sadly sir it turned out to be Bios issue , and you have to contact dell support so they can give you an exact same bios as the one you have , or you gonna have to change motherboard eitherways contact the nearest dell support center and hopefully you can get a fix/replacement not like me I still didnt fix it because there are non in my country sadge good luck friend !
@darknight602
3 жыл бұрын
@@rkorabbit3811 just had to wait for the pc to reboot cycle a couple of times due to the bios config. Everything’s working now
@rkorabbit3811
3 жыл бұрын
@@darknight602 congratz man , really happy for you !
@MrVictorchagas
2 жыл бұрын
@@rkorabbit3811 any solve?
@NecroPotatoYT
2 жыл бұрын
Missed what you did lower left hand side of the screen to get the back off. Oh well on to another video.
@gnrslashsp6501
Жыл бұрын
I managed to do following your video, thank you very much. But it didn't completely solve it... the CPU temperature is reaching 100ºC even without running anything on the PC. The GPU temperature is fine, 72ºC with an open game.
@gnrslashsp6501
Жыл бұрын
Problem solved! I change a config inside the BIOS, something that was enabled by default that allows the driver to control CPU performance, this is causing temp to floating very much and reach 100 . Disabling this, the CPU stays in 65ºC and goes up to 70ºC and the fans do not work as before.... damm DELL and theirs drivers....
Пікірлер: 270