I come here to thank you, I'm from Rio de Janeiro, Brazil. Of all the videos on this subject, yours helped me a lot. Thanks!!!
@DaneluRepairs
Жыл бұрын
Thank you, mate. I'm from Romania. Wish you a great day.
@fernandoantoniotecnologia7240
Жыл бұрын
I never saw someone make like this in the motherboard! Congratulations! I'm brazilian and i watched your video here in Brazil!
@DaneluRepairs
Жыл бұрын
Thank you very much, Fernando. I'm from Romania, Europe, and here we are not so much wealthy, and because this oem motherboards are very reliable, and with an i5 2th and an ssd, are resulting a very nice speedy computer, i have to think at some solutions. Because customer don't want to press F1 every time that computer starts. And, this solution its working just perfect, i do a lot of mainboards like this. On my channel, i have another few model, most from Dell, that i modified. Congrats and a Happy New Year, back to you, from Romania.
@fernandoantoniotecnologia7240
Жыл бұрын
@@DaneluRepairs Thank you! My computer is the same model, Dell Optiplex 390 and with same problem, i forget to say.
@davitwindya973
Жыл бұрын
It WORKS ! but, I decide to solder it all.. Thanks, Brother 🎉🎉🎉👍👍👍 Thanks from Indonesia
@DaneluRepairs
Жыл бұрын
You're welcome, Davit. Congratulations to you, back from Romania.
@mukky5808
Жыл бұрын
Thx Dan !!... you make my life much easier... it works perfect on my board which eventually the exact same model.... Regards from Beautiful island, Bali.
@DaneluRepairs
Жыл бұрын
You're welcome, Mukky. If i can make a picture right now, i'm "modding" another mainboard, same MIH61R mainboard. Yeaaah, Bali is 🥰 All the best from Romania, mate, which is also a nice country.
@mukky5808
Жыл бұрын
@@DaneluRepairs wooww.. Romania the Country of Beautiful Girls and The Country of classy Jewellery, I've been there around 10 years ago attending the Jewellery expo.. amazing country you're live in.. by the way, back to topics, there are many branded-used motherboard on the market down here, i personally choose branded used rather buy the new after market motherboard for $$$ shake. Branded motherboard (i.e HP, Dell, Lenovo, Samsung), at lease in my opinion and experience, are designed to be as solid as rocks. Reliable durability --- i think this also reducing the world electronics/hardware waste.. ha ha ha... -- not many tweaks of Samsung motherboard video on youtube..
@DaneluRepairs
Жыл бұрын
@@mukky5808 yes, you are very right about my Country, our pretty romanian girls and realibility and stability of oem mainboard, from Dell, HP, Fujitsu pc's. I preffer all of them 😛
@rawshna
Ай бұрын
It works thank you so much from Egypt
@DaneluRepairs
Ай бұрын
@@rawshna you're welcome, here is Romania.
@abdaimegaming2679
Жыл бұрын
thank you very much man. this is a good tutorial, i will follow your instructions and try to fix mine , but i have just onz question, what about the second fan? we don't need to wire it too to the cpu fan ?
@DaneluRepairs
Жыл бұрын
You're welcome, mate. if you reffer at second system fan, that one don't give an error if missing; so, no wire is necessary.
@andyeriel7860
4 ай бұрын
Muy útil el video, me sirvió de mucho, muchas gracias.
@DaneluRepairs
4 ай бұрын
Hola. Me alegra que lo hayas encontrado útil.
@LexterLS400
Жыл бұрын
This the true internet, Dell does not want us to repair upgrade or anything to make yor machine renew. Microsoft lets me buy and buy new licensies .... these companies are greedy. Dell is killing the planet by refusing to les us repair the PSU, replace the motherboard for a modern one in your old pc case. Washing machines are throw away devices just like our phone. This video is very helpfull if you want to re-use your non Dell case with a Dell motherboard. There are adapters to go from a 390 to a 9010 MT but i want a new motherboard into my Optiplex 360 MT ( the best formed and desigend case ever). I am trying to rebuild recustomize my Dell Optilx 360 cae MT do adapt any brand M-ATX or ATX boards, but i do want the front panel to work. So i need to adapt the pinouts .... to connect to my Machinst B75 Pro moterhboard. @ Dan, great vid i know how hard it is to make a video, i should practise how to cut and paste , add text and links. I suck at that. But Dan i need some help with my project and you are close to it. There is on vid where the person changes the front panel usb and audio and power swtich wires to fit a universal frontpanel bracket.any motherboard. He uses a 9010 and then he want to put a universal motherboard in the 9010 case, he does not film that part. The 360 has a old skooll flat ide cable wich runs to a small pcb, Dell doesnt give any pinouts because they want you to buy buy buy more. Well i am donme with buyoing product that cannot be repaired or loose their update after so many years. Can any one post a link of the pin out header front panel Optilex 360 MT ?
@DaneluRepairs
Жыл бұрын
Hello. Sadly, i don't have case from Dell, only Dell mainboard.
@DaneluRepairs
Жыл бұрын
But, in first seconds on video, is a picture with Front panet wire plastic block, who came from front panel of the case, in mainboard. From that picture, is "kind of" easy to understand how your led's and button are. If i receive some Dell case in future, i'll make a video transform to a regular mainboard pinout.
@vondreux942
11 ай бұрын
i found it very helpful what process can i bypass the front io failure
@vondreux942
11 ай бұрын
it was success no error if its jumpered.. but if i insert usbf1 and audio it has the error again
@vondreux942
11 ай бұрын
or how can i use the front panel of the case?
@DaneluRepairs
11 ай бұрын
You're welcome, John.
@DaneluRepairs
11 ай бұрын
@@vondreux942 1. Insert usb and let jumper on audio. 2 insert audio and let jumper on USB. 3. Observe on what case you have problem, on usb or audio
@DaneluRepairs
11 ай бұрын
@@vondreux942 4. So, to use your front panel, after detect on what have problem, usb or audio, put usb and audio front panel in mainboard and use a short wire, stripped on both ends and use it like a jumper on usb/audio part where is problem, put it on top of your front panel. Voila, this is solution.
@cliffordcliff2535
Жыл бұрын
Thank you so much for this.. never thought it would work, lol my friend said goodbye to my motherboard when i was soldering that green to yellow fan cable, even myself though its not gonna work.. no more press f1 to continue Keep up the goodwork sir
@DaneluRepairs
Жыл бұрын
i'm glad that i'm helpfull, Cliff; yeah, green go to yellow because there are colour from 3 wire fan jack to 4 wire fan jack; but, you can show your friend that picture at 0:12 to see that on bouth wire say TACH; thank you, please like/sub/share etc, greetings from Romania, mate.
@camera9707
2 жыл бұрын
you're so good. Wish you more and more success. I come from Vietnam
@DaneluRepairs
2 жыл бұрын
Thank you for your kind words. All the best for you, also. I live in Romania.
@camera9707
2 жыл бұрын
really. you have a very good intellect. I also work as a computer. friend
@DaneluRepairs
2 жыл бұрын
@@camera9707 thanks. A repair computers and laptops for ~15 years,but i post on KZitem only for just one year. Good luck at work.
@nortenoalterado9041
2 жыл бұрын
thanks for the video, a question if I don't have the jumpers can I solder the pins?
@DaneluRepairs
2 жыл бұрын
Yes.
@monsterab69
10 ай бұрын
Hello Danelu! I have front io cable failure but when i put jumper on the pins and my keyboard is connected computer doesnt boot and starts beeping.After the dell logo black screen comes and start beeping....This is only when my keyboard is connected otherwise computer boots fine
@DaneluRepairs
10 ай бұрын
Hi mate. I'm pretty sure that you put jumper in wrong position. Check very carefully. And, always put wired keyboard in the back of computer, not in front USB.
@DaneluRepairs
10 ай бұрын
Front usb are only for usb sticks and USB receiver from a wireless mouse/keyboard aka front USB are only for low power devices.
@DaneluRepairs
10 ай бұрын
Also, on second thinking, maybe your keyboard is defective.
@monsterab69
10 ай бұрын
jumper is on the right position just like the video@@DaneluRepairs
@monsterab69
10 ай бұрын
and yes keyboard is on the back
@wderich17
Жыл бұрын
muchas gracias bro!!! 👍thanks very much👍
@DaneluRepairs
Жыл бұрын
You're welcome, mate.
@VU2IIA
2 жыл бұрын
Thanks Dan, good info.
@DaneluRepairs
4 ай бұрын
Hello. Thank you.
@robertocollinton8525
2 жыл бұрын
it is better to continue using it with the warning than to burn the card for inventing and better to buy the fan that it has
@DaneluRepairs
2 жыл бұрын
You make me laugh. Mainboard is working perfectly. Not single one, but dozens if not hundreds. In perfect working state. Buy fans is easy, here is about fan and a lot of front jacks, and switches. This moding is for poor people, not for people who can afford new mainboard.
@doug_1489
Жыл бұрын
Thanks very much! 👍
@DaneluRepairs
Жыл бұрын
You're welcome, mate.
@mutiarawarna
Жыл бұрын
Sangat membantu 👍 terima kasih
@DaneluRepairs
Жыл бұрын
You're welcome mate, glad to be helpful (Sama-sama sobat, senang bisa membantu - indonesian google translate).
@alperenkeskin4055
2 жыл бұрын
hello, toshiba satellite click mini l9w-b windows 10 I couldn't find the drivers
@DaneluRepairs
2 жыл бұрын
uk.dynabook.com/support/my-product/laptops/
@DaneluRepairs
2 жыл бұрын
You select Satellite, and then your model and that's it. With pleasure.
@kodlikekodshare
5 ай бұрын
Thank you
@DaneluRepairs
5 ай бұрын
You're welcome 😊
@antoniofemminella8639
2 жыл бұрын
I notice at the end that the previous fan failure message is still there?
@DaneluRepairs
2 жыл бұрын
I think you reffer at 17:08; there it says PREVIOUS man, PREVIOUS; after that, i reset to clear that alert, and voila, all errors gone, because the inital CAUSE no longer exist; now, you understand?
@chokokrispi2502
2 жыл бұрын
Just plug any fan
@LucVerhulst
Жыл бұрын
Please help:) First at all...thnx for the vid:) Keep up te good work!. But i have a question. I have the same motherboard. but i still get the Front I/O Cable Failure. Alert!. I put the tree pins together, as you explaind, but i still get the Alert. Can you help me? Thnx!
@DaneluRepairs
Жыл бұрын
thankyou; Front I/O Cable Failure you get from 3 reasons; take a good look at picture from 0:08 and make 3 things: 1. short those 3 pins from LEDH1 2&3: you need to put jumpers/shorts also on USBF1 and AUDIOF1; ok?
@vondreux942
11 ай бұрын
how can i use front if i jumper on usbf1 and audio
@DaneluRepairs
3 ай бұрын
@vondreux: take out jumper and put metal pin or just wire directly in jack.
@luan9139
Жыл бұрын
Tranks bro!
@DaneluRepairs
Жыл бұрын
You're welcome, Luan. Greetings from Romania, mate.
@camera9707
2 жыл бұрын
Thank you verry much
@DaneluRepairs
4 ай бұрын
You're welcome.
@dirtmike6258
Жыл бұрын
thank you for your video ... great help and appreciated .... f'kn Dell and their proprietary hardware bullshit .... i will never buy another product from Dell again if i can avoid it ... Hp has some bull of themselves, but no company is as bad as Dell
@DaneluRepairs
Жыл бұрын
Dirt Mike, dirt language 😂 You're right mate, all companies are bad, but we have to live with them. Just like women's 😂 Also, this mainboard is oem, meaning it's not sold by Dell as is, is sold only in systems. And in original case, this video were useless. But, i see good part, they make very reliable mainboard 😍 Also, thanks for kind words. Greetings to you from Romania, mate. Have a great day.
@dasb95
Жыл бұрын
hi, i need that drivers that Mobo....
@DaneluRepairs
Жыл бұрын
Hi. Do like i do in this video, from 30:48 time kzitem.info/news/bejne/1W6hx4h6epqdjagsi=Rj75cyOgUOVeKyJj
@lele2171
2 жыл бұрын
Ah, i hope there is option in dell Bios to bypass the error like asus mobo bypass f1 error... Hahaha.. I buy it because it's cheaper than other used branded mobo. I have this one and I just bought the 790 sff mobo. On the 790 one, i have to modify my standard pwm hsf to 5 pin dell fan... Just connect them with jumper cables with correct order (just change blue / pwm position after black / ground)
@DaneluRepairs
2 жыл бұрын
"Ah, i hope there is option in dell Bios to bypass the error like asus mobo bypass f1 error..." NO, there is no such option in bios for this motherboard. Actually, in oem manufacturer bios mainboard, like this one, you will not find many options like in normal bios manufacturer mainboard, like asus, gigabyte, msi etc.
@wallyg4445
Жыл бұрын
Didn't work for me!
@DaneluRepairs
Жыл бұрын
What is not worked for you? Be specific. Take picture, put them online and put link here. There is no way to not work. I personally made ~ 15-20 mainboard modified and all work. And there are many subscribers that is working also for them, you can read bellow.
@POPUKO-mv8bu
Жыл бұрын
Без оригинального корпуса работать, я так понимаю не будет? Я весь день eбycь с этой платой.
@DaneluRepairs
Жыл бұрын
Да, это работает отлично. Смотреть видео.
@antoniofemminella8639
2 жыл бұрын
you delete all the alerts but the one with the fan in the back is still there
@DaneluRepairs
2 жыл бұрын
I explain at the other comments you left.
@LexterLS400
Жыл бұрын
@@DaneluRepairs Indeed if i was miljonair i would buy a new Dell
Пікірлер: 90