This video is very underrated. Keep up the amazing work!
@AlteredComponent
3 жыл бұрын
Thank you. I really appreciate the feedback
@keithcevasco2827
3 жыл бұрын
master and slave was exactly what i needed to know. If master has power then the slave gets power as well. Its one big power supply and not 2 put together. Thanks you.
@AlteredComponent
3 жыл бұрын
Correct and thanks for watching
@evielcastroazamar2137
2 жыл бұрын
@@AlteredComponent does this mean that the psu only has one power rail shared between both slots? I just want to be sure that both slots will have/provide the same voltage, to avoid a difference between risers and gpus.
@llamaboi6370
3 жыл бұрын
Thanks I have been looking for this
@AlteredComponent
3 жыл бұрын
Thanks for watching. Glad to help!
@franciscoguardado773
3 жыл бұрын
Also love the cinematic preview! I think stuff like that is super important to add
@AlteredComponent
3 жыл бұрын
Thanks. I have been working to improve my camera work and shots
@grtbaldini
3 жыл бұрын
Its huge!!!! Great video....
@AlteredComponent
3 жыл бұрын
She is a girthy power supply for sure
@jaimepamanes
3 жыл бұрын
Hello, 3 months ago I bought 2 psu delta 2400w and today they turned off and cannot turn on, I already tried with different power cables, breakout boards and it is the same result, just turn on the central fan, will they have any way to protect themselves? because it is strange that the two sources behave exactly the same, I have another 5 psu of 1200w server and those have been working without problem
@AlteredComponent
3 жыл бұрын
I wish i had the answer for you on that one. Honestly not sure. I would open a ticket with Parallel miner and see if they can drop some information.
@OSkyFireO
3 жыл бұрын
Thanks for the review. We have limited room at our office so only have one rig there....but it boasts 8x3090 TUFs....the power consumption is incredible for just eight of those...one of these isn't enough on It's own, but It's going to tidy up the whole thing a great deal!!
@AlteredComponent
3 жыл бұрын
Thanks for watching. Oh yes..those things are amazing and drink a lot of power. Look up bits be trippin. He has a 14 card rig build using 2 of these server psus and projected for 1.1ghs on eth. Title is "rtx megabuild..." take care
@ericsarason9099
3 жыл бұрын
Quick question, what would you say would be the best budget card for ETH now that 4GB cards are out of the question due to the dag file size?
@AlteredComponent
3 жыл бұрын
well, a handful of cards in contention. 1660 supers / Tis still get a solid 30ish mhs at low power. 5600 and 5700 xts do great if you can find at a good price. of course the old 570 and 580 8gb models are still making good profits, but personally I liquidated all all gen cards...meaning polaris and 10 series. I have a feeling those will be hard to flip once the tide sinks back down. thanks for watching. (best budget card for eth is the 3060ti if you can get at or near msrp of course)
@Jushih
3 жыл бұрын
Hello, I'd like to ask where did you get the 24pin cables that has 24 + 4 for the CPU? been looking for it but not having luck finding it.
@AlteredComponent
3 жыл бұрын
It is included with the zsx game changer breakout board. Not sure you could use it safely elsewhere
@ITservisi
3 жыл бұрын
Hi, i have question... Does it works on full power 2400 w or it has smart system and uses as much as connected device needs? For example if i will use only 1 graphic card, it will consume 2400 w ?
@AlteredComponent
3 жыл бұрын
Thanks for watching. All server psu that I have ever used only use as much power as is demanded from the components. Take care
@AlteredComponent
3 жыл бұрын
To clarify, 2400w delta, 1200w hp, 750hp, 1500w from pm
@welldone8511
3 жыл бұрын
Could you tell how loud it is? In idle mode (no load)? 50% load 75% load? Is it comfortable to stay in the same room while psu working in different loads? Thx!
@AlteredComponent
3 жыл бұрын
Thanks for watching. In my opinion when this is under 50% load I find it no louder than my 120mm fans in open air frame. When u get to that 75% + load, that is when those cans start to really whirl up. Same can be said with most server power supplies.
@welldone8511
3 жыл бұрын
@@AlteredComponent appreciate, many thx!
@ajayyadavofficials7490
3 жыл бұрын
2400 watt smps does we have to connect these breakout bord with sata to run second breakout of 2400 watt smps. 🙄
@AlteredComponent
3 жыл бұрын
Thanks for watching. The 2 breakout boards are both powered via the server psu. Technically you can run 1 breakout board for the full 2400w but not advised since you should try to load balance. Run 2 breakout boards and load balance if possible. Take care
@AlexisLavado
3 жыл бұрын
i bought 2, and one of the psu make a very high frequency noise that come and goes, is this normal?, has happend to you? im powering with 220VAC
@AlteredComponent
3 жыл бұрын
Thanks for watching. mine does not have a noise that comes and goes. it does have a low constant wine. Then again mine also does not carry but around 50-60% load which makes a huge difference. Wonder if the noise coincides with the Heat of the PSU. As it spools up it should naturally get louder, and that happens with more load, but I wouldnt think it should come and go really.
@AlexisLavado
3 жыл бұрын
@@AlteredComponent my psu also has like 1200w of load (like 50%), the fans arent running full speed, and the noise is not related to the fans or heat, because at night with temperatures like 10°c the noise comes and goes.
@danielxwyatt
3 жыл бұрын
Hey what is a pdu, also, do you need any additional cables to be able to plug it into a wall outlet and use it
@AlteredComponent
3 жыл бұрын
Pdu is a power distribution unit. It looks like a large power strip. Especially handy when connecting multi 240v rigs. Search 240v pdu on ebay for examples. As long as the outlet is 240v, and your one side of the cable that plugs into the server psu is a c19 connector then it will work.
@danielxwyatt
3 жыл бұрын
@@AlteredComponent thanks
@animalchannel6845
3 жыл бұрын
Hello! I like your explanation - it couldn't be made better! Tho I have one question for you, I'm thinking about buing such a PSU for my mining rig but the issue is... will it work with european plug type (Germany)? If so, I assume with some European type socket adapter or? Can you tell me the name of the adapter? Cool video!
@edperez9408
3 жыл бұрын
Have you been using this PSU? I bought one and when try to use it, I heard some sound from it, do you know if those sounds are normal?
@AlteredComponent
3 жыл бұрын
Thanks for watching. Are you just talking about a high pitch fan noise?
@PWNY
3 жыл бұрын
would you say that the Delta 2400 power supply is quieter than an HP 1200 Plat. Power supply at about 80% 1000Watt load ?
@AlteredComponent
3 жыл бұрын
Honestly it 100% depends on load. When my hp 1200 or hp 750s are below 70% you can't hear them over any of the regular 120mm fans. Seems like the same case with the delta. Under 75% load and I do not hear it over the rest of the rig. Take care
@PWNY
3 жыл бұрын
@@AlteredComponent thank you very much:)
@samuelnolasco7690
2 жыл бұрын
When will these be back in stock? is there anywhere else I can find them? I have looked and looked and I cant source but I need several of these bad boys!
@AlteredComponent
2 жыл бұрын
honestly i think they sold them through a ways back and never got them again. I recently checked ebay...hard to even locate these things used nowadays. take care
@muhammadfahruddin9023
3 жыл бұрын
i like how you doing . slow and clear narration its easy for understand for me who english not mother lang 👍 i see in pararel shop to band sending to asia cost alot :( btw 1 problem with server PSU the " nois sound" do you have recommended DYI tweking fan or sound ?
@AlteredComponent
3 жыл бұрын
Thanks for watching. That is a great point and common with all server PSU. If under a 75%- full load, most Server power supplies are pretty noisey. Personally I have never actually done a fan mod on a server PSU. There is definitely a way to do a resistor mod on a server PSU fan to cut the noise, but i cannot give good or bad points on it because I simply have never tried it. I have rigs in garage, in basement, in mining shelter, so noise has never been a factor for me.
@angelvaca9232
3 жыл бұрын
If I only want to connect 8 GPUs, can I do it only with the main output? or do I need to balance with the secondary output?
@AlteredComponent
3 жыл бұрын
Yes, you can just use the primary side and power from 1 breakout board. Technically you could pull the full 2400w from the one power bar, but not advised. Should load balance if you are pulling more than 1500w for sure
@noahfalkenstein8454
3 жыл бұрын
AWESOME CONTENT THANKS FOR POSTING
@AlteredComponent
3 жыл бұрын
#nerdlife ;)
@slimbuzz9613
3 жыл бұрын
i just ordered one of these, could i use two x11 breakout boards or do i have to use the zsx as the main breakout board.
@slimbuzz9613
3 жыл бұрын
nevermind brother, i should of finished the video before i asked you a question
@AlteredComponent
3 жыл бұрын
@@slimbuzz9613 no problem man. Appreciate the watch.
@brandoncoin
3 жыл бұрын
hoss of a psu!
@AlteredComponent
3 жыл бұрын
Thanks for the support buddy
@Crypto_MarkX
3 жыл бұрын
Would I be able to use it on a 850w rig if I plug it in to 120v ?
@AlteredComponent
3 жыл бұрын
Thanks for watching The delta 2400w will only run off 200-240v power. Some server psu like the hp 1200w can run off 120v or 240v, but this beast is 240v only. Take care
@khaledalmazrooei7994
3 жыл бұрын
i wish you added the things we needed to power up like the PDU and how to get them, and if you had 220-240v what and how you could connect it and make it work. i bought the 2400w and i have no idea how to power it up
@AlteredComponent
3 жыл бұрын
thanks for watching. PDU are best to pickup from Ebay imo. Can be found cheaply there. My man Mad Electron Engineering has a couple good videos discussing a cheap PDU set: kzitem.info/news/bejne/1YxrvXmnpqaUjZg
@zioimeczkuu
3 жыл бұрын
Hello mate I’ve been mining on these 2400w power supply for around 2 months I was wondering if I should balance the amps/watt pull from the slave and master port. I’m currently running 30amps on master and 18 on slave. Hope this should be fine🤔
@AlteredComponent
3 жыл бұрын
thanks for watching. I specifically reached out to parallel miner with the same question months ago. The answer is, it is perfectly fine to draw all the power from one side in short term, however for longevity of the psu, you want to load balance the master and slave side whenever possible. But in your case you are running decent juice on the slave and pushing the master, if you cannot pull more over to load balance, i personally think that will run just fine like that for an extended period
@zioimeczkuu
3 жыл бұрын
@@AlteredComponent Thanks for the fast reply mate. So you suggest balancing out the two breakout boards? I have a ZSX and X11. I’ll try to see if I can balance out the two.
@jdmfreak101
3 жыл бұрын
I do have a 220v power supply, can i just plug this right in to my wall? Does it come with a power cord with a plug i can plug directly to my wall? thanks and great vids
@AlteredComponent
3 жыл бұрын
thanks for watching. It does not come with power cord. It is recommended to use a PDU to plug into, and if so then PM does have the wire for sale to accomplish this.
@TonnoNinja
3 жыл бұрын
HI, nice video but I have a question: how much noise it makes?
@AlteredComponent
3 жыл бұрын
Depends on load. Same with most server psu. If u have 75% of max load or less on this thing, it is no louder than open air 120mm fans on a rig. Now when u get 90% + it will scream. Same as my 1200w or 750w hp server psus. Hope this helps
@TonnoNinja
3 жыл бұрын
@@AlteredComponent Whow, so fast! Thank you for your quick answer.
@snuggleseal
3 жыл бұрын
Hi, good video, thanks
@AlteredComponent
3 жыл бұрын
Thanks for watching and love the username. Does @Red Panda know about Pandagasm?
@mickeybinas
3 жыл бұрын
i just ordered that last week. doesnt it come with the power wire?
@AlteredComponent
3 жыл бұрын
Thanks for watching. Unfortunately it does not. They do sale a power cord for pretty cheap for it on site, but it is specifically for the server psu to a pdu setup.
@mickeybinas
3 жыл бұрын
@@AlteredComponent i have set up 240 v and pdu
@ShmeegleSon
2 жыл бұрын
Do you have another source for these? Parallel miner has been out of stock for awhile now, thank you!
@AlteredComponent
2 жыл бұрын
Honestly they are very scarce nowadays. When i made this video, Joseph of Parallel miner said they were going away and would be very hard to acquire once they run through all the inventory. I just checked sold items on ebay and only found 3 of them sold in the last couple months.
@ShmeegleSon
2 жыл бұрын
@@AlteredComponent All good, thanks for the response!
@TMProjection
3 жыл бұрын
each pin can withstand 288 watts still right?
@AlteredComponent
3 жыл бұрын
yes sir. A single 6 pin from the breakout board can safely pull up to 288. they can actually pull more, but safely 288 ;)
@GP-qb9hi
3 жыл бұрын
Excellent video! Now I'm thinking if I should get this PSU or 2x1200W HP. It would cost the same. HP seems easier to sell in case I have to. What do you think?
@AlteredComponent
3 жыл бұрын
Thanks for watching. The HP 1200w will be easier to re-sale, and here is why. The hp 1200w can be used with standard 120v or 240v electric whereas the 2400w beast can only 240v power and thus a smaller segmented market. That being said, these 2400w are a slightly more compact solution for a large setup. If you go with dual 1200w HP psu, you will need either 1 of the zsx game changer so you do not have to use an atx power supply or separate PICO adapter. Unless of course also using a small atx psu with the Server psu. Take care
@GP-qb9hi
3 жыл бұрын
@@AlteredComponent Here in Europe all we have is 230V... The only difference I see now is the shipping cost which is half for the Delta 1200W, so I might get that afterall.... Thanks for sharing this video, very helpful!
@AlteredComponent
3 жыл бұрын
Appreciate the feedback. Take care
@JovianPug
3 жыл бұрын
Hey - thank you for your video :) I wonder what is the PSU fan size?
@AlteredComponent
3 жыл бұрын
I believe those are all 40mmx40mm server fans and they are stacked on this specific psu. most server psu's use the same size fans. thanks for watching
@JovianPug
3 жыл бұрын
@@AlteredComponent Thank you sir :)
@redpenguinmining9216
3 жыл бұрын
Finally a video on that psu! One thing though and correct me if I'm wrong but the 6 pin pcie connector is rated for 75w, Splitting 6pin pcie cables into 2 8 pin Pcie would not be safe since you are now allowing the card to pull 150w on a 75w cable. Did I miss something?
@AlteredComponent
3 жыл бұрын
Thanks for watching. That is a common misconception. The reality is a 6 pin at the gpu can pull up 75w and the 8 pin at the gpu can pull up to 150w. A 6pin connector on a breakout board can push up to 300w. The key to do this safely is the cables used. Inside the cable has terminal pins that hook to the wires. If these are 5 pin, then they can not handle this load. If they have the 6 terminal pins and wires it can. Next, make sure the cable that plugs into the breakout board is 16 gauge or lower. Then u can safely split that wire into 2 8 pin plugs and provide up to 150w on each. Again still safe. Also, parallel miner has a 6 pin to triple 8 pin adapter. As long as your card is undervolted, you can safely use these to power dual 8 pin gpu and a riser on 1 cable. The full power draw should be kept under the 300 watts to safely move that power. Hope this helps. Take care
@redpenguinmining9216
3 жыл бұрын
@@AlteredComponent wow thank you for the detailed explanation! I will save your reply! I think you could do an entire video just on PSU and cable safety, information is inconsistent and all over the place on that. I feel better now about using these server PSUs:)
@AlteredComponent
3 жыл бұрын
No problem. Spent too much time nerding out on power supplies. I actually reached out and spoke with one of the main guys at parallel miner, Joseph. That guy has so much knowledge and helped clear up any of my questions, such as the power delivery, load, how much power components can handle, etc. I seriously appreciate the feedback
@redpenguinmining9216
3 жыл бұрын
@@AlteredComponent Excellent, perhaps they could document that, on their site I'm sure it would help them for sales, information on those PSUs is hard to find and would remove friction to the purchase. PS: I already have PSU from PM but thanks to your reply I can save myself some cables:) I had totally "overbuilt" in terms of wattage. Better safe than sorry eh!
@hebertomendezgarrido8931
3 жыл бұрын
Can I use a C19 to C14 without PDU?
@AlteredComponent
3 жыл бұрын
Feasibly you could, if your outlet can accommodate it. The PDU, or power distribution unit, is basically a beefy Powerstrip that accommodates easily these types of plugs.
@coachlap
3 жыл бұрын
Can it run 2 game changer board AIO with 2 motherboards?
@AlteredComponent
3 жыл бұрын
No it cannot. I just checked and the physical size of those boards are too wide to have more than one plugged into the 2400w delta. Thanks for watching
@coachlap
3 жыл бұрын
@@AlteredComponent thanks for your quick response. Will order the hp PSU with the Game changer.
@paulorodrigobeck7895
3 жыл бұрын
How do I do if my motherboard has 2 Cpus?
@AlteredComponent
3 жыл бұрын
Thanks for watching. I would assume it depends on how the motherboard is powered. As long as you can supply power to both CPU 4 or 4+4 pin then you would be good.
@paulorodrigobeck7895
3 жыл бұрын
@@AlteredComponent humm, i have a z9pe-d8 ws and 2 Xeon 2670 V2. If note? is there any other solution?
@AlexisLavado
3 жыл бұрын
it would be nice if you turno on the psu to know how much noise make in idle
@AlteredComponent
3 жыл бұрын
Thanks for the feedback. Check out rabid mining. He has a videos showing sound i believe. But my opinion on sound. And I verified this with sound meter. At 50% or leas load, a set of 4 x 120mm cheap fans is louder than this psu. At 75% load, u will start to hear it wind up. At 85%+ it will definitely give some sound
@HugMyTibbers
3 жыл бұрын
You don't even power the psu on... nor do you show why the slave doesn't power on... basically u didn't tell us jack crap u looked at someone else's KZitem and you didn't even think why the slave won't power
@AlteredComponent
3 жыл бұрын
Thanks for watching. While I appreciate your concern, I feel like I have broken this down so that even the most novice of user can connect this power supply and put it into use. Pretty simple to explain. If u connect a breakout board to the master side it will turn on, if u do not, it will not. I assure you I did not have to watch anyone else's video to hook this up. Feel free to check out some of my other videos on parallel miner's website. Take care
@solankiatish
3 жыл бұрын
Hello, @Altered Component, I have seen miners using 2 ATX 1300 watt which is equal to 2600w for 6 of 3080, but u said I can use more than 8 of 3080, I am a little confused why red panda is using two 1300 watt Atx power supply, Second stuff Red Panda said 3080 can end up consuming 350Watt which is equal to 2100 watts in total for 6 3080 then how it is possible to add 8 to 12 cards on this. Look at the website here in the graph 4th bar as I am going to use that GPU: www.guru3d.com/articles-pages/msi-geforce-rtx-3080-gaming-x-trio-review,6.html Though I have already ordered this unit and I am planning to use for 6 cards, I can definitely add more; like 8 to 12 if u can explain to me the watt calculation because if I end up using 8 cards the total watts I am will end up drawing in extreme circumstance is 2800W, if the clocks revert back to stock. I am just asking so I have a better idea, I going to ask the same question to parallel minner
@AlteredComponent
3 жыл бұрын
Sure happy to help. For 1, red panda uses almost exclusively atx power supplies. Server psu function a bit differently. A huge rule in atx power supplies is called the 80% rule. Generally you want to target your max power at 80% of the rated wattage on the power supply of an atx psu. Ie, a 1000 watt atx power supply really should only target 800 watts draw on this psu. Now for the biggie. When you google or watch reviews on power draw of graphics cards, unless it is a miner showing these results they will be quite skewed. The TDP on these cards are 320 watts. A gamer will want power at 100% or heck even 105% to try and get extra frames. However, as a miner you should be greatly undervolting. You should have a 3080 pulled clear down to around 220w per card. Hashrate on an algorithm like ethereum can do better with low power, negative core, and greatly overclocked memory. Hope this helps
@PifchoBG
3 жыл бұрын
they dont make the psu, they sell it
@AlteredComponent
3 жыл бұрын
That is correct. Thanks for watching. If I made it sound as if pm makes the psu, then I apologize. They definitely do not produce them
Пікірлер: 107