I get mellow watching these. Great unwind again. Thanx and yes I wonder about some technics when I see them but he's working the machine im not
@PreservationEnthusiast
2 жыл бұрын
Quite a lot of prissing about positioning the head. I feel he was a bit inexperienced with the size of machine. Also he could have been using the weight of the tool for scraping mass debris off the structure and down to the ground. He seemed to be spending a lot of time positioning the tool to cut off or nudge small bits of material. That's an expensive machine to buy and hence per hour to operate. The best policy is to use it for bringing high parts of the structure quickly to near ground level where they can be dealt with by smaller, less expensive machines.
@andyhughes5885
2 жыл бұрын
With this operator the building will still be standing when jingle bells is playing on the radio. Painfully slow.
@maz2100
10 ай бұрын
Would be a good thing if the rebar cutting blade was made further forward
@constructionwatcher5381
2 жыл бұрын
Thanks, John. It was interesting to see the two concrete munchers working side-by-side. I thought for sure he was going to drop that I-beam on the street below, but he finally got it. At 2:17:40 it's interesting to see how much that concrete beam bends before it starts to crack at the column and fall. They must have spent a lot of time working inside before they started removing the structure. Long enough to require a lot of temporary barriers around floor openings they created or exposed. I see all the drywall, interior partitions, and dropped ceilings are gone. That to keep them out of the masonry debris when they took down the structure?
@peon9282
2 жыл бұрын
Yes, drywalls and interior like floor tiles are usually removed before demolition starts, so it really isn‘t more than steel and concrete. A reinforced concrete beam doesn‘t break, unless you hit it right in the middle.
@constructionwatcher5381
2 жыл бұрын
@@peon9282 Thanks for the info about interior finishes. My point on the concrete beam is that it does bend a quite noticeable amount, which I had never realized. When this one failed it was the connection to the column that failed.
@elevatorelectricalenthusiasm
2 жыл бұрын
These types of buildings take extremely long to demolish.
@marktaylor2644
2 жыл бұрын
this guy must have been new on this size of machine. he sure wasted alot of time nit picking with it and slow movements. it was hard to watch the machine not used too its max. capabilities.
@inescividanes2403
Жыл бұрын
Como voces consegue ter um operador tão ruim de serviço. Esse operador nao trabalha nem meia hora comigo. Muito ruim.
Пікірлер: 11