This is a short video on how to use a Buzz saw. I used slab wood in the video to show how it runs. Hope you enjoy please like, subscribe and comment below if you like what you see. Thanks!
I have received a few questions as to the size of my pulleys. Since the making of this video I have changed the engine to a 212 Predator, the original decided to take a dump on me and spit oil out of places it shouldn't.
The clutch pulley is a 3" then goes to a 4" on the jackshaft.
The other pulley on the jackshaft is a 3.5" going to a 9" pulley that is mounted next to the flat belt pulley. I was lucky to have room to be able to fit the 9" pulley next to the flat belt pulley. I say 9" but I think Amazon listed it as 8.95"
With that setup the motor runs about 3600rpm and the blade turns around 1000rpm. I have not had any issues as of yet.
Негізгі бет Demonstrating Using A Cordwood Buzz Saw With Slab Wood With A Tecumseh 8hp Engine
Пікірлер: 43