For Those who has the G923 for the Xbox One I Used Xbox one G923 with True Force and I got the Pedals to work. in the Pedals, Use "Combined Pedals" Depress the Brake all the way And Click for Down It should look like "JOY0_ANL1_KEY" While The "Up" Button stays the same name "JOY0_ANL1_KEY" If Done wrong should look like "JOY0_ANL5_KEY" Or The Up Button ends up as "NONE" The "JOY0_ANL5_KEY" is what is between The Gas and Brake And that is why when you let go of the pedal the car instantly stops. Also Don't Forget to change the Advanced Display Settings to 60 fps if you have a high hertz monitor. Sega's Naomi games act weird if you don't set display to 60 hz.
@Legendz_Nightz
11 ай бұрын
I need help it keep saying analog 5
@H89Mike
2 жыл бұрын
Great tutorial, simple and effective. Nice editing too, made me smile!
@End3rW1z
Жыл бұрын
Thank you. Hopefully no ads too, since those can be annoying.
@rscit8
2 жыл бұрын
THANKYOU SO MUCH!!!!! I was getting so frustrated - i wasted so much money on this game in the past, and was looking forward to playing this but annoyed I couldn’t get it to work. now I can play it with my g920 whenever I want!!!
@Cr4z3d
2 жыл бұрын
This actually worked, thank you!
@Cr4z3d
2 жыл бұрын
Also a tip: if you use the demul version of Arcade Force Feedback Plugin, you can have full ffb in arcade stage, and it works perfectly.
@Alabasterslim
Жыл бұрын
Oh my god! Thank you!!!!
@bf666bf
Жыл бұрын
I know this video is a bit dated, but I was hoping someone might be able to help me. I have Windows 10, DEMUL, Logitech G29 wheel+pedal+shifter (with hub, of course, and added demul to profile, yes I checked combined pedal setting), I also tried getting the Thrustmaster T3PA (with driver, of course)... EVERYthing I've tried so far has given me this result when trying to map pedal buttons: Demul reads all pedals as JOY0_ANL1_KEY, in the game, clutch/brake does nothing, and gas acts as a gas/brake switch. Any help much appreciated in advance. I currently have the Thrustmaster T80 on order because it comes with a TWO pedal set (IF that ends up helping), and my next worst-case scenario after that will be sticking freakin programmable toe buttons to the floor. At least I won't have to use keyboard steering, that looks the worst. Again, any help much appreciated.
@parkreese
2 жыл бұрын
Great tutorial! but ive been having the problem where the clutch pedal wont act as an input in the config, so instead of brake being JOYANL6 itll always input JOYANL1 (the gas pedal)
@End3rW1z
2 жыл бұрын
Did you made sure to tick 'combined pedals' before configing?
@parkreese
2 жыл бұрын
@@End3rW1z Yup, it says JOYANL1 for both but yet the clutch pedal wont brake in game
@End3rW1z
2 жыл бұрын
@@parkreese Hmmm...could that have something to do with your steering wheel in 'PS4' mode? Forgot to mention in the video that I had my G29 steering wheel in 'PS3' mode.
@parkreese
2 жыл бұрын
@@End3rW1z ah, it might be the problem since I have an xbox configurated g923, so that might be the problem. Thanks for the help anyways!
@End3rW1z
2 жыл бұрын
@@parkreese No worries. Hopefully you will find a solution soon!
@MrJmsjna27
8 ай бұрын
Hi there. I made a profile for Demul on Ghub but every time I click Demul the profile on ghub goes to Desktop. I can’t seem to get demul to recognize the wheel even after combining pedals and turning the wheel in the direction you noted. Any help would be greatly appreciated!!
@mr.okchannel1541
3 жыл бұрын
thanks mate, been looking for this tutorial all over the internet is it possible to use brake padel as brake in demul ?
@End3rW1z
3 жыл бұрын
For some reason it does not configurate properly when you do that, thus why the tutorial suggests combined pedals ticked and using clutch as brakes. If I remember correctly, if you configure the brake pedals as brake in demul it will always engage the brakes until you accelerate. It's unusual but since the game does not require a clutch to change gears, it's not bad to configure it as the brakes. And personally, it allows a better leg spread for longer period of play.
@mr.okchannel1541
3 жыл бұрын
@@End3rW1z I see, the clutch works well ill just stick with it Appreciate your hard work man, you saved me ton of time, there isn't much tutorial out there
@End3rW1z
3 жыл бұрын
@@mr.okchannel1541 Yeah it's very niche and it frustrates me that there isn't anyone out there who did a video tutorial on it.
@mr.okchannel1541
3 жыл бұрын
@@End3rW1z I'll try to ask moderator of initial D discord server to ping your vid, hope this will help those who needed
@mr.okchannel1541
3 жыл бұрын
@@End3rW1z sorry mate, can't get them to ping your vid since there is rom file included in your vid
@robigonzales1295
2 ай бұрын
how about for simagic wheel? hope u make a video tutorial.
@pdxmetal
8 ай бұрын
I had my Thrustmaster T300 configured this way for Naomi games like 18 Wheeler and Crazy Taxi. Mapping is easy for buttons; hold a button down and click the push button box. Same with the wheel; turn the wheel, hold, and click the box for analog L/R. Gas; push down and click analog up box. But when you do the brake it will duplicate the value of the gas and won't work properly. It only works as clutch, and only when you select combined pedals. This really sucks because other games, like MAME games, won't work properly when combined. Demul also doesn't have an exit button which is completely asinine. You have to Alt+Enter to exit fullscreen and close the box manually. So Demul driving games are basically standalone and have to be ran with specific settings every time and can't be mixed with other games in a frontend. Stupid.
@NakariShiro
4 ай бұрын
How did you manage to set up the wheel controls on DEMUL without Ghub automatically switching back to default desktop profile when clicking the control window? Mine switches back to default everytime I click the to bind the control on Demul or any window; it's so frustrating
@End3rW1z
4 ай бұрын
When you switch from DEMUL windows back to ghub, there should be a blue rectangular box prompt below ghub that should allow you for ghub not to automatically set to desktop. Hope that helps.
@NakariShiro
4 ай бұрын
@@End3rW1z I've set Demul as a persistent profile while mapping the controls to prevent profile switching so all good now. Thanks for the quick reply!
@user-bf1yc5kh2i
8 ай бұрын
What should I do if it says JOY0_12? Amazing video btw
@sxiong13
20 күн бұрын
does this work on the g27 wheel?
@End3rW1z
20 күн бұрын
@@sxiong13 if it has Logitech Ghub to customise the configuration of your steering wheel buttons and controls, yes
@MNBassYaking
2 жыл бұрын
Everything works but the steering wheel, if you turn pass a point you run into the walls... anyway to fix that?
@End3rW1z
2 жыл бұрын
Withthe game still running, pause demul, go back to Logitech Ghub, set the values to 900 degrees, steer the wheel to ensure it works then set it to your personal values. Finally unpause demul and see if it fixes the issue. It's important you config the steering when it was at 900 degrees first before you could change the steering angle to a smaller value, like 130 degrees in the arcades.
@camstimmler6002
2 жыл бұрын
everytime i try to map a pedal it just says joy 12
@End3rW1z
2 жыл бұрын
It seems like you need to make a Demul profile through Logitech G Hub. From there you should be able to configure your pedals through the tutorial via timestamp 2:12
@yano4473
2 жыл бұрын
Isn't the proper wheel range for id3 540°?
@camstimmler6002
2 жыл бұрын
how to i make an active profile for demul
@End3rW1z
2 жыл бұрын
1. Open up Logitech G Hub. 2. Click 'DESKTOP Default' located below the 'ACTIVE PROFILE' text. 3. Click 'ADD GAME OR APPLICATION'. 4. Locate your 'demul.exe' and done.
@sevens12
Жыл бұрын
now i need the ffb plugin
@NolansNotSlow
2 жыл бұрын
I have a g920 and no matter what I try when im mapping anything it just brings up the anl6 key
@End3rW1z
2 жыл бұрын
Check 1:41 of the video
@SergeiWhobichakokov
Жыл бұрын
My left and right get assigned Joy0_Anl3_KEY and they alternate to a none when I assign the opposite direction
@chucksgrace3225
2 жыл бұрын
I followed these instructions with my thrustmaster but my brake pedal now acts as the gas pedal:(
@End3rW1z
2 жыл бұрын
Firstly, I'm surprised you are using a logitech tutorial to config your thrustmaster. Secondly, I'm not familiar with Thrustmaster, but if your setup has no clutch pedal, try holding down the brakes then click on DOWN in Analog 1. Otherwise, do that with clutch pedal like the video. Very important you hold down the brake or clutch pedal down all the way. If all the above fail, then you'll need to find a different tutorial that specializes in thrustmaster.
@chucksgrace3225
2 жыл бұрын
@@End3rW1z Yeah, none of that worked, but thanks anyways
@pdxmetal
8 ай бұрын
@@End3rW1z I configured my Thrustmaster the same way. Combined pedals and use clutch for brake. Untick combined and you get duplicate values. Use brake pedal and you get duplicate values. I found this video looking for a better way. Guess there isn't one.
@keybaytech
2 жыл бұрын
Hi, I got error message shows IdirectinputDevice8 CreateEffect FAILED, and I am using G923, do you have any ideas to fix this? many thx
@End3rW1z
2 жыл бұрын
I assumed you stopped the video before 3:00 because after that time stamp you could just click ok and your G923 wheel should work regardless.
@keybaytech
2 жыл бұрын
@@End3rW1z great, thx a lot
@chucksgrace3225
2 жыл бұрын
@@keybaytech good boomzlangz FFB (force feedback) and it kind of fixes it.
@pdxmetal
8 ай бұрын
This is an error looking for FFB. Non game breaking. Press enter to skip or write an AHK to close it like I did.
Пікірлер: 57