Thank you for the unboxing and preliminary installation video. I still need help understanding how to adjust the stylus pressure ring counterweight. What is the recommended tracking force for the Denon DL103R MC cartridge, or how can I determine the best tracking force for it?
@AudiolabStereoVideo
5 сағат бұрын
Thanks for the comment!! For that cartridge the manual says 2.5g ... plus or minus .3g - if the bass seems to much then it's probably a little too much weight. If you go to 6:46 in this video you get the tonearm so it's floating. That's your zero point and you turn only the part with the numbers on it and NOT the whole counterweight to "0". After that you turn both that and the counter to 2.5 in this situation, for your cartridge. I can make a video showing exactly what I mean. For now I'll put the manual below for your cartridge. I bet that cartridge sounds amazing!!! www.denon.com/on/demandware.static/-/Library-Sites-denon_northamerica_shared/default/dwd77cb899/downloads/dl-103r-owners-manual-en.pdf
@varghesethomas6882
5 сағат бұрын
@@AudiolabStereoVideo thanks very much for your prompt response
@jasonhall4734
3 ай бұрын
Perfect for my pma 1600ne amp
@AudiolabStereoVideo
3 ай бұрын
Most definitely! I love that pairing idea. Haven’t heard it but I think that’s a great idea!!
@JumbleTasteSpinning
3 ай бұрын
There is 78??! In no other video they have no mention 78! 😂😂 Amazing.
@AudiolabStereoVideo
3 ай бұрын
Yep!! Pressing the 2 buttons at the same time engages the 78RPM mode. We read the manual! 😁Lol
@keensoundguy6637
Ай бұрын
Denon's product page on their website mentions it, as do the downloadable PDF documents (info sheet, owner's manual, and quick start guide). To switch to 78 rpm, "While pressing the SPEED button, press the START/STOP button." Of course you'll want to use a suitable stylus for 78 rpm records.
@Jose-go3to
4 ай бұрын
PLEASE I NEED HELP. is the denon dp 3000ne better, or the micro seiki bl 71 from 1984? Which one do I buy? Thank you very much. Greetings
@AudiolabStereoVideo
4 ай бұрын
I am not familiar with the Micro Seiki BL 71. I looked a little into it online and it's a nice turntable no doubt. Given what I know about the Denon vs. older turntables if it were me I'd go for the Denon. I've had a lot of turntable pass through my hands both new and old. Some very very old. This Denon is so well built and so beautiful I would have to say the Denon. I would imagine the Micro Seiki might be hard to find parts if you ever needed them. These DP3000's are becoming very popular and therefore the parts more easy to come by.
@vinylrules4838
5 ай бұрын
Would be great to have your view on this turntable vs the Technics.
@free5403
5 ай бұрын
I have the 1210GR and bought now this Denon too. The Denon looks nicer and plays good but for me no real difference to the technics. But from time to time the buttons on the Denon don‘t work, then I have to unplug the power to make it work again. The technics just works, always. The Denon looks good in my living room so no regrets. If I would buy it again, I‘m not so sure
@AudiolabStereoVideo
5 ай бұрын
Well, it's been decades since I've used a Technics. But I will say this Denon is so impressive in looks and sound. It instantly became my favorite. My only gripe is the headshell has these wings(for lack of a better word) that most Ortofon won't fit properly without the provided spacers. With the spacer(2) it works totally fine. I can't speak for comparing this with the Technics, but after playing with this for a time I wouldn't look any further. And I am/was strictly a Pro-Ject guy.
@AudiolabStereoVideo
5 ай бұрын
Sorry to hear yours isn't working properly. Can you return it, or even the Denon warranty?
@savethephotons2532
4 ай бұрын
Thanks for the video. In which country the the turntable is made?
@AudiolabStereoVideo
4 ай бұрын
seems to be made in China. That's what the box says.
@jc51373
4 ай бұрын
Chinese made crap. over priced for what it is.
@acwood72
Ай бұрын
@@jc51373 China makes some junk, yes, but this isn't an example of that. This thing is outright amazing. I regretted spending the money until I got it. Once I unpacked it, I had zero regrets. Extremely well made...extremely.
@erics.4113
5 ай бұрын
What cartridge do you like on this table?
@AudiolabStereoVideo
5 ай бұрын
Rega Ania Pro is one of my favorites.
@ralex3697
Ай бұрын
@@AudiolabStereoVideo Ortofon LVB Black
@marvinshaberesq.5072
Ай бұрын
@@AudiolabStereoVideo The Denon 103R or the 301 Mk2 will do nicely.
@ptg01
5 ай бұрын
Oh my.... how tall are the feet ?I Looks huge.... how about anti-skate ?
@AudiolabStereoVideo
5 ай бұрын
It is pretty big. All around. The whole table with dust cover is a little over 7 in. tall. I was joking that next a Rega P3 it looks like Big Foot (the monster truck next to a Honda Civic) In the best way possible. It's so classy looking and feeling. What would you like to know about the anit-skate?
@ptg01
5 ай бұрын
@@AudiolabStereoVideo I was wondering why in the video, you did not show how to set the anti skate ? I may have missed it ! Also, I am wondering what is the height of the FOOT only ? That is, how much space is between the shelf where the unit is going to sit and the BOTTOM of the plinth ? Hope this makes sense.
@AudiolabStereoVideo
5 ай бұрын
@@ptg01 oh I see. That makes perfect sense. I mentioned it or at least showed it(close up) and the reason is we have a turntable series on the horizon that will cover every general aspect of all the different methods/models/approaches to anti-skates & everything else about turntables. On the DP3000NE it’s a knob you twist. If you go to 8:10 in the videos you’ll see it. I will see how tall the feet in the morning. Sound good?👍🏻
@ptg01
5 ай бұрын
@@AudiolabStereoVideo In addition to understanding the height of the feet I would be curious what’s the minimum vertical space (height) between shelves is needed to have the lid stay open ? I have some severe space issues hence all these questions ! Thanks
@AudiolabStereoVideo
5 ай бұрын
@@ptg01 Hi! The feet are 1 and 3/4 inch(es) high. With the lid open, it is 19.3 inches high. So 20 inches or more space in a rack/shelf will give you about half an inch leeway. Hope that answers your questions. If you have any more please reach out. You can comment here preferably or call our store at 1-800-513-8555. Or email sales@audiolab.com ... we're a family-owned small business which gives us the flexibility to give people focused attention you probably won't get at a "big box" store. (that's not a sales pitch, I genuinely love it here and we really do spend the time with people 😁 - sincerely, your friendly neighborhood audio guy)
@marcse7en
Ай бұрын
Obviously, the turntable is designed for use anywhere in the World (having a universal power supply, as is common on much electronic equipment), but it seems a waste of raw materials to provide USELESS power cables, which may simply be discarded? Not terribly green?
@neverknowit11
5 ай бұрын
What! No 45 adapter?
@AudiolabStereoVideo
5 ай бұрын
The “clamp” doubles as a 45 adapter 😁
@ste7017
5 ай бұрын
Where is this turntable manufactured?
@ptg01
5 ай бұрын
Most likely China....
@AudiolabStereoVideo
4 ай бұрын
@@ptg01 Sorry it took so long to respond... yes it's made in China
@pinkypoohable
7 күн бұрын
Made in China. So no for me.😂
@metroboom25289
5 ай бұрын
👍
@metaljoe9088
3 ай бұрын
Premium? From china? Wow... never dude. Expect failures due to china quality. Tried and tested chinese products sucks
@pinkypoohable
7 күн бұрын
Absolutely. It can’t be premium or high end.
@elmhurst86
3 күн бұрын
Can't avoid it. Most Hi-Fi components are assembled in China these days, even if they're designed elsewhere. Fortunately though, China is upping their game in manufacturing. Big difference from even 10 years ago. Kinda like where Japan was in the 70's.
Пікірлер: 42