I love the way you keep repeating the instructions, and show where the tools are located, and the options that we can take. Th4e fact that I subscribed says it all....
@ShopTherapy623
Ай бұрын
Thank you for the feedback! I really appreciate the "follow." Hopefully more to come!
@mmr159
24 күн бұрын
That click at the end! So satisfying.
@MarkusRe72
Ай бұрын
I have learned a lot from this video. It was easy for me to follow your steps. The idea to move the ends of the thread by 70° made my day. Thanks a lot and keep on uploading such great videos.
@makingwithanedj
Ай бұрын
As a fellow self-taught Fusion user, I'm really glad your channel popped up in my suggested videos! Like many things in Fusion, there's multiple ways to get to the finish line and it's fun seeing different approaches to what I would typically do. It's good to carry alternate methods in our bag of Fusion tricks. One tidbit for you is that when doing circular patterns, you don't need to select just an "axis". You can select any circular face, edge, or sketch line as well.
@ShopTherapy623
Ай бұрын
Thanks for the feedback and I completely agree! I am aware of the other ways to use the circular pattern tool but didn’t want to confuse people so figured I’d just show the axis method. However, that is a great tip, and hopefully people will read the comments (like yours) to learn more!
@pezwezxx
Ай бұрын
Once again, a great video... Love the simplicity... Thanks
@_lumpy8859
20 күн бұрын
Very helpful! made one start to 3D print. Some very helpful tricks! Thanks!
@stephengittins6116
Ай бұрын
Great video. Something else that I've learned, thanks for sharing. 🙂
@ellishomeinspectionsllc7053
Ай бұрын
Great video and instructions! Make more stuff please!
@ShopTherapy623
Ай бұрын
Thanks, will do!
@RobertD_83
Ай бұрын
I clicked because I downloaded a jar about 6 months ago that looked EXACTLY like that one and reprinted the lid 3 different times with slight size variations and could never get it to fit correctly enough to be usable for my needs. Could have been because I was using a 1mm nozzle and vase mode due to lack of time, ended up spending too long anyway and just buying something. Thanks for the tutorial. I've only done some basic modeling in onshape but am going to watch some more of your stuff
@ChrisWard74
Ай бұрын
Awsome, and thanks for taking my advice on showing it printed. Also thanks for adding in the embossing. I'm still new to Fusion360 and have watched HOURS of videos yours till show me some things I didn't know like holding down the mouse button.
@mikelaurie3850
Ай бұрын
Good Job, I followed along and did this in Fusion, and printed it. The one thing I added was to user parameters so its all parametic
@ShopTherapy623
Ай бұрын
Nice! I love making models parametric!
@amunioz
Ай бұрын
Great job! Excellent description of each step and the big ending with the piece 3d printed. And the ccick Awesome Very thanks and please keep on this track Best regards 👏👏👏
@stuartwyre4742
28 күн бұрын
Thank you. I have been designing a Spaghetti container for my wife and the Fusion Threads were not suitable. Too many turns to tighten or remove the lid. I used your technique, very pleased with the results.
@Janes_Patrocinio
Ай бұрын
Nice teacher! Thanks a lot!
@ShopTherapy623
Ай бұрын
Glad you liked it!
@brucefox6580
Ай бұрын
Great tutorial, thank you.
@lajulasse4332
Ай бұрын
Learned a lot, thanks!
@MrCardeso
Ай бұрын
Great series on different methods for jars with lids and great explanation on the use of the tools, including the embossing! Subscribed!
@MultiHippie13
Ай бұрын
Great tutorial!
@ShopTherapy623
Ай бұрын
Thank you!
@thierrymelmet3813
Ай бұрын
Goog job. 👍👍
@michaelstraughn3465
Ай бұрын
Most excellent video...
@ShopTherapy623
Ай бұрын
also, I swear I don't have a lisp. Lol. For some reason the microphone recorded all of my "sixes" as "thixes" - lol. I really need to figure my audio out
@Wauk9390
Ай бұрын
Your videos have improved my workflow by a large margin. Great stuff! Love the format where you show any mistakes and how to correct them.
@dumpsterdave3710
Ай бұрын
You're using some sort of noise reduction on the audio which is why it sounded like that. Having a more solid setup without noise reduction would be better, but it really wasn't bad at all.
@lach808
Ай бұрын
I didn’t notith. I just found your channel. Subbed and looking forward to going back through your catalog :)
@vanhelzer22
Ай бұрын
Nice work!
@ShopTherapy623
Ай бұрын
Thanks!
@juancelestino8563
Ай бұрын
Nice video! 🙌👏🏻
@HelmutEder
11 күн бұрын
Super! I try that now! Thanks.
@Makeup-Effects
Ай бұрын
Great. Thank you
@Golkun1
Ай бұрын
What I like most is the snap when the lid is screwed on. Was this on purpose or just lucky design?
@XxMsrSzprzxX
Ай бұрын
*click* "Nice."
@MrJdorrington
13 күн бұрын
Not that there's anything WRONG with having a lisp... Nice video, thanks.
@morzo95
Ай бұрын
Great video! This Triple-Start thread is really working great. I have printed model actually the same as you but i have one question. There is no click as in yours :( do you know maybe which dimension or feature is responsible for that in this assembly?
@billbyrd9845
11 күн бұрын
To select the axis while patterning, I'm pretty sure you can simply click on the outside or inside of the jar.
@ShopTherapy623
10 күн бұрын
Yes you definitely can! I should have showed that, but it’s hard to remember everything when doing a video like this!
@billbyrd9845
10 күн бұрын
@@ShopTherapy623 It was a good tutorial. I looking forward to printing one.
@hussainaleid4389
Ай бұрын
Not a Fusion360 user, but I really found this video very helpful. Keep the great work going.
@richardphillips92
Ай бұрын
Great video and it turned out great first go. No click with mine, though.
@ShopTherapy623
Ай бұрын
The "click" is very odd. I've been getting some people saying its there, and other's its not. It must be something to do with the layer lines, and print settings and not the model itself.
@Parsifal251
Ай бұрын
Very good and easy to follow tutorial. However I am using Solid Works and it was pretty easy to duplicate almost everything - except the coil function. SW have an helix function which can be extruded to a "coil" quite easily. However SW defaults to a clockwise rotation which I didn't noticed until I realized the lid screws on and off in the wrong direction :) When you explain all the different coil settings, you didn't mention the need to be careful and pick counter clockwise as the right direction.
@ShopTherapy623
Ай бұрын
Yes I should have covered that! In Fusion that is the default, so forgot to mention it.
@oldfarmhand7714
Ай бұрын
Another great video! At the seven minute mark when you make the coil how is it only half way around I know that i'm missing something. I have played that 07:00 minute several times but I don't know what i'm missing? Please don't change the way you present your videos because it shows that you are human (even the baby crying in the background briefly) 😄 on another video. Never mind I saw it!
@corbingarza6100
Ай бұрын
The error on the second circular pattern was because you selected the coil from the model and had "Faces" set for the object type. Great video though, and I'm going to use this for all my future designs.
@ShopTherapy623
Ай бұрын
Thanks for the info!
@ConvSegmet
Ай бұрын
Great video. I always had seam challenges with smooth shapes as well... You might try Orca slicer's Scarf joint feature. Ive recently given it a go and when used with a random seam position seams on cylinders nearly vanish.
@ShopTherapy623
Ай бұрын
Thanks for the tip! Definitely going to try that. I use Bambulabs slicer and random seam looks absolutely awful.
@totoffe6234
Ай бұрын
Bonjour même pour une personne francophone da aide beaucoup + 👍
@rojaro4
Ай бұрын
Rather than making the coil as a new body, could you make the coil as a join and then create the circular pattern with object type set to features, selecting the coil and 2 rotations? I think it could circumvent the combine step.
@ShopTherapy623
Ай бұрын
Yes you could. I always set to “new body” in case I want to tweak them before joining.
@rojaro4
Ай бұрын
@@ShopTherapy623 Thank you for clarifying! Great tutorial
@tumadsvids
Ай бұрын
Heowdi. I did print this (thanks) but it wouldn't close. Let me slow it right down and try again. 😊😊😊
@lorenzo-f5p
Ай бұрын
Great video! Will try this soon :) Any idea why the little click happened at the end when screwing the lid in all the way? As far as I could tell, you didn't add any notch.
@ShopTherapy623
Ай бұрын
No, I'm still trying to figure that out! Other people who have printed it, have had the same experience. Maybe the layer lines are lining up perfectly and "clicking" past each other at the end?
@lorenzo-f5p
Ай бұрын
@@ShopTherapy623 Could be. Might try to figure it out once I get around to making/printing one of these threads :) Thanks for the video, subbed!
@morzo95
Ай бұрын
Great video! This thread works great! I have followed all your instructions and made the same design as you. But i have one doubt. There is no click :(( Do you know maybe which dimension or feature is responsible for that?
@ShopTherapy623
Ай бұрын
I have some people getting the click and others not getting the click. So I think it has to do with what printer you have and maybe your printer settings. I'm wondering if the "click" is the layer lines sliding past each other at the last moment. I'm not sure.
@morzo95
Ай бұрын
@@ShopTherapy623 ok, thank you for such a quick reply! :)
@magicshon
Ай бұрын
I personally don't like any of the basic shapes in coil for this application. The round one is imprecise for the printer and the triangle is too sharp. Square creates overhangs. I have tried a few times to make a custom one by using the triangle edge as a sweep guide rail. Its a hassle but it works. If you do that make sure you define the sketch plane from the path as it has to be correctly tilted. For some reason when i did that i had trouble turning one side with move. Also move often breaks when parameters are changed. I think i ended up cutting it using a plane before combining. I had the coil feature fail on me also when i changed the size of the object underneath which moved the coils center - the coil wouldn't adapt and stayed on place while the object moved. I had to define a plane by a sketch line for the coil that would move with the object. The coil feature could really use a few upgrades, not clinging to any shapes as its defined is annoying. I learnt to use custom parameters for every dimension i use more than once. Id love for it to have a custom shape or allow a sketch to be used.
@ShopTherapy623
Ай бұрын
My method works flawlessly every time. I've never had problems with it once
@voodas
Ай бұрын
On first coil I get "Failed to build coil tool Body" error
@ShopTherapy623
Ай бұрын
Try changing the order in which you change the coil parameters. Change the diameter of the coil to 2mm before changing the other settings.
@BigSteelThrill
Ай бұрын
I want to try and make it see how well the triples work, wheres the file? 🤩
@ShopTherapy623
Ай бұрын
It’s on Makerworld. Search for “Dfreshkremer”
@WW-wp4gh
Ай бұрын
Sorry if this is a dumb question but I am really new to using Fusion. Why wouldn't you just make the lid over the section with threads and then just cut the threads from the intersection of the lid cylinder and the thread tenon section? Fusion can't do that?
@ShopTherapy623
Ай бұрын
Fusion definitely can do that, and you can definitely make threads like that. However, I have found that those threads don't work as well when 3D printing. Having two "male" threads, as opposed to a "male" and "female" thread, tends to work much better.
@WW-wp4gh
Ай бұрын
@@ShopTherapy623 Appreciate the reply, thank you. And also, nice video.
@magicshon
Ай бұрын
I use this approach a lot with custom threads for 3D printing (like a triangle but with 45; angle), especially if they are too complicated to define. The key here is to use offset face and offset them from each other by a little bit (which is also good to do with the regular F360 threads but anything under i think M16 doesnt let you have a 2mm pitch which i find works very well for printing).
@meethmj3853
Ай бұрын
this video doesn't deserve to be free try putting this content on Udemy its worth it
@Not_2_day
Ай бұрын
Congrats on the 1K Subs . Keep it up. I enjoy your Content! ✌
@ShopTherapy623
Ай бұрын
Thank you!
@ellishomeinspectionsllc7053
Ай бұрын
Great video and instructions! Make more stuff please!
Пікірлер: 77