that low speed hum sounds quite beautiful on this motor
@TheDragonFire123
2 жыл бұрын
Random thought, but I wonder if any lift logic uses terminal commands, rather than buttons and an LCD, to give commands (i.e. having to enter in commands into a UART/serial terminal port). IMO, KCE has very little user facing difference to LCE. It was likely made to integrate all the functions of the DX class. Whether that's a good thing is a matter of perspective.
@benolifts
2 жыл бұрын
Yes. The Schindler Miconic V. The early versions had a serial to video out adaptor in the logic which you plug a screen into, then you plug a keyboard into a port on the logic, and you work with the logic through sending commands over serial. The later versions changed this to simply having a serial port, and you use a laptop to send and receive the serial data. This is the only example of a logic with direct terminal serial data. The majority of non relay lift logics have a serial port, but this uses custom data, and a program (often a win16 program) is used to interface with the logic. Also, there is some crappy German logic where to do anything with the logic you have to enter a coded command on a keypad. It is very user unfriendly.
@TheeSurfer
2 жыл бұрын
Yay also I'm loving it in Egypt I've went down some lovely slides and went to some safety failure lifts with lovely motor sounds.
@NaylenGamingTV
2 жыл бұрын
I’m in Egypt too in the Aqua palms hotel.
@TheeSurfer
2 жыл бұрын
@@NaylenGamingTV omg come over here, also I got into the motor room of the lift in my hotel have you?
@stevendamavandi3482
2 жыл бұрын
Kone’s NMX14 Eco Disc is the giga chad of elevators.
@UncommonElevators
2 жыл бұрын
I love NMX14. It is the best sounding ecodisc model. Here in the USA tons of them have been installed in the last few years. That is good because before this motor was introduced Kone often installed really terrible lifts with no chassis and a 4:1 roped MX10, probably because the MX20 was very heavy and hard to install. Also, I am always surprised at how behind the rest of the world is when it comes to bypassing safety. Here, most lifts built since the 90s have a bypass key switch inside the car and up/down key switches on the top and bottom floors. These exist even on non-MRL lifts.
@What_The_Fuck_Did_I_Just_Watch
2 жыл бұрын
I love EcoDics!
@elevatorfilmersg
2 жыл бұрын
The old 1960s Otis lifts at Arlington House margate would be replaced sometime this year to next year according to some sources. You might want to consider a revisit
@genekeefer891
2 жыл бұрын
I will say though It's a very nice look at a lift though you're well detailed in you're filming
@PrestissimoMasterStation
2 жыл бұрын
Warning!
@contentdeleted142
2 жыл бұрын
My favourite ecodisc is the mx20
@Techwindowscomputer
2 жыл бұрын
Oh is there new version of kone ecodisc now I didn't know that
@superxraygirl1756
Жыл бұрын
The NMX 14 ecodisc is my favourite
@Andrewjg_89
2 жыл бұрын
But which one of those Kone Ecodisc models are more reliable or efficient. Some interesting stuff on how you explained that how they work.
@LAUCHGeorge
2 жыл бұрын
Can you please do a detailed look at Kone LCE? I don't understand anything of this Menus and it would be nice if you could explain it in a Video
@jingarjay8754
2 жыл бұрын
When is the detailed look at LCE coming?
@benolifts
2 жыл бұрын
Soon, hopefully
@RossiZockt
Жыл бұрын
8:16 Thank's ive seen enough. :O :D
@KIRBZVIDS
2 жыл бұрын
Good video that's well interesting mate how you can run the lift with the doors open like that what would be the main purpose for doing that? , Free fall lift stuck Passingers?
@aziz75568
2 жыл бұрын
10:27 "...and could crush them." Doesn't that sound much worse when it sounds casual?
@EverydayEverything360
2 жыл бұрын
Now I've had time to compare it I personally don't like the new black ring designs of KSS fixtures as the older designs.
@alexbrace2005
2 жыл бұрын
The CLONK is the best sounding brake
@LBSiUK
2 жыл бұрын
Oh and don't forget the MX05
@dinhtuan752
2 жыл бұрын
He did
@VerlorenMaster
2 жыл бұрын
Beno, will you do a Cheap Flight Adventure to Cairo in Egypt? If you are in Egypt, you will have: *Egyptian Pound*
@benolifts
2 жыл бұрын
I might do. It is somewhere that I would like to visit.
@VerlorenMaster
2 жыл бұрын
Yes, and you will have *Egyptian Pound* if you're in Egypt.
@piotrekiwindy1980
2 жыл бұрын
So much floors for mrl! It's interesing.
@PrestissimoMasterStation
2 жыл бұрын
Welcome, beno!
@dinhtuan752
Жыл бұрын
your welcome
@BM13590
2 жыл бұрын
Hmmmm the lift may be 2.5 m/s but not faster for 28 floors because you don't want to be inside the lift for like 3 or 5 minutes
@benolifts
2 жыл бұрын
Most of the buildings this size have MRLs nowadays, which limits the speed to 3 m/s.
@windowsxpnt2347
2 жыл бұрын
hey austin this is guys
@the_2_td_s
2 жыл бұрын
Please make a detailed look video at an mx20
@the_2_td_s
2 жыл бұрын
Beno what is your favorite kss? My favorite is kone kss d40
@nelsonahlvik6650
2 жыл бұрын
What VF does it have (# in menu 6)?
@benolifts
2 жыл бұрын
Sadly the LCECPU was locked.
@nelsonahlvik6650
2 жыл бұрын
@@benolifts Ah ok. Don't you have that unlocking tool though? Or does it not work on this generation of LCE?
@benolifts
2 жыл бұрын
There are 3 versions of LCE. The early version with the pull out chip - The jailbreak device doesn't work on this as there is no serial port. It is easy to jailbreak with the writing tool for the chip. The second version is the standard version that shows 5 and 7 when locked. The device can unlock this. The 3rd version is on this lift, which shows just 5 when locked. I haven't tried jail breaking this version yet.
@FateBoost
2 жыл бұрын
Just seen you on channel 4
@UKliftandescalatorfilmer
2 жыл бұрын
Could you do a cheap flight adventure to Belfast again? You missed some Schindler M series that are original but the outside indicators have been replaced
@benolifts
2 жыл бұрын
To be honest, I wasn't that impressed with Ireland
@UKliftandescalatorfilmer
2 жыл бұрын
@@benolifts Will you go to Belfast tho?
@benolifts
2 жыл бұрын
@@UKliftandescalatorfilmer I have no plans of going there, but where I end up going to can be very random.
@UKliftandescalatorfilmer
2 жыл бұрын
@@benolifts those Schindler’s might get modded which I’m worried about
@UKliftandescalatorfilmer
7 ай бұрын
@@benoliftsthey’re being replaced by TKE soon 😢
@lollol6812
Жыл бұрын
How do you bypass older models of the LCE board?
@benolifts
Жыл бұрын
For bypassing the safety, pull out the connectors and put a bypass loop in their place. For bypassing proprietary restrictions, for the oldest type, take the chip out and use a chip writing tool to change the variable for trip counter back to zero. For other types you can buy the jailbreak tool from ebay.
@hotmixer2010
2 жыл бұрын
Come to Singapore, all LCE here are fully unlocked
@TheDragonFire123
2 жыл бұрын
Maybe a consumer rights thing. In Australia we have them all unlocked as well; I guess the ACCC came down hard on the practice.
@PrestissimoMasterStation
2 жыл бұрын
Exposition!
@wisteela
2 жыл бұрын
I just had to scan that QR code.
@Internationalcartoons4063
2 жыл бұрын
First Very interesting video too.
@xxalexaviation
2 жыл бұрын
Diamond
@williamhuang8309
2 жыл бұрын
First? Ok. Arriva.
@Andrewjg_89
2 жыл бұрын
Yes very interesting video but no one cares if you’re first 🥱
To move a lift that is not operating. Unless the motor or VF has blown, or there is no power to the lift, or there is a severe mechanical failure, then the reason why the lift is not moving is because safety is not connecting somewhere. The engineer will have to locate the point where safety is not connecting, and this involves moving the lift.
@contentdeleted142
2 жыл бұрын
I don’t like the design of this lift nmx14
@nelsonahlvik6650
2 жыл бұрын
19th
@xxalexaviation
2 жыл бұрын
Can you dangle on this?
@benolifts
2 жыл бұрын
Possibly. The shaft celling is quite high to reach the hook. The faster the lift, the more over run space it needs.
@xxalexaviation
2 жыл бұрын
28 floors for an mrl gosh
@benolifts
2 жыл бұрын
I have seen such taller than this.
@xxalexaviation
2 жыл бұрын
@@benolifts oh
@ZHD1987E
2 жыл бұрын
@@xxalexaviation I have seen Kone Monospaces do 100m+. In Singapore there is one warehouse and 3 of them are N Monospaces (or Monospace 500) that goes around 30 floors at 2.5 m/s
Пікірлер: 87