The clunk was characteristic for the ecodisc, but I guess KONE got a lot of feedback from architects and building facility managers to make the motor quiter. The clunk is pretty loud and many people may not like it when a lift makes such loud noises. So, just like the car industry, they may have had some sound designers optimize the design to reduce the noises and sounds. With luxery car's they tweak the sound of the doors so that when you close them they have a solid feel "sound" to them. I've seen this on a tv program featuring BMW. They go to town with the sound design to make it feel like a proper door. Who knows, how much effort KONE has put into the sound design of the 4th generation ecodisc (I'm just guessing). Btw, it's the ecodisc's 20 year aniversary!
@indotravelguy2004
8 жыл бұрын
actually the 2nd gen clunk in america is better for people
@indotravelguy2004
8 жыл бұрын
NOT THE LOGIC! NOT THE LOGIC! i tell you, i mean the clunk of 2nd gen is quiter, surely i hate american ecodiscs. kone in europe and australia actually are very good. the singapore seem to follow american even though they are not as crap.
@indotravelguy2004
8 жыл бұрын
are you kidding me? america? generic? i never knew that before. check it again, its probably dover.
@mattheww3116
8 жыл бұрын
TOTALLY EPIC! Thanks Beno!
@LBSiUK
6 жыл бұрын
Don't forget about the really nice chimes on the 4th gen!
@SproutyPottedPlant
7 жыл бұрын
It may have lost it's clunk but it has gained some nice cogging and buzz sounds 😁
@LiftEnthusiast2020OFFTOPIC
5 жыл бұрын
Wow nice there is one of these at bister shopping centre car park. 2 3rd gens in believe and in deck c a 4th gen.
@Khaledamrouche11710
2 жыл бұрын
Thank you lift enthusiast 2020
@TheDragonFire123
7 жыл бұрын
-Asian Ecodiscs still have brake clunks... for now.- S MonoSpaces in Asia have brake clunks. Basically, the more heavy duty EcoDiscs have kept their brake clunks but the cheaper office-quality ones lost them.
@SproutyPottedPlant
8 жыл бұрын
Yeeeessss! I love this Ecodisc! I bet Toplevel does too! I rode one but couldn't hear the EcoDisc on the lower floors :( they made it too quiet!! I like the fixtures.
@What_The_Fuck_Did_I_Just_Watch
3 жыл бұрын
The display looks a bit boring, but apart from that this is a really nice elevator!
@germanlifts5960
8 жыл бұрын
YES! Thank you Ben!
@ezrqil
5 жыл бұрын
The local school near me has a 4th gen ecodisc
@Shnlmukpglifts_liftenthu-255
Жыл бұрын
Sounds like my haircuter lol 😂
@chatterbox-ly5oz
8 жыл бұрын
I might have been in lift almost the same as that ecodisc you filmed not long ago.
@shreerammandalnews6221
5 жыл бұрын
Very good working i like
@tamtomgaming3743
8 жыл бұрын
I never heard the eeeeeeeeeeeeeeeeeeeee when you where in the lift
@elhelezito5492
3 жыл бұрын
i love ecodisc souns!
@newchannelcomingsoon5800
4 жыл бұрын
2:03 down 3:19 full speed ride
@4trainfan909
3 жыл бұрын
Thx
@user-oe3sd4jk6f
Ай бұрын
why it slow when using a nmx 11 ?????
@reececollison5101
8 жыл бұрын
The 4th gen ecodisc confuses me slightly. Before it seems they use a 2nd generation for smaller lifts and a 3rd gen for bigger lifts with typically more floors and busier places, but now they're both discontinued in favour for this one new model. Do they also use this same ecodisc for their smaller lifts (what would have been smaller second generation ecodisc said until they were discontinued in 2013) but programmed to go slower? Take for the example the 2012 small 4th generation eco disc at the lion yard/grand arcade in Cambridge.
@indotravelguy2004
8 жыл бұрын
3rd gen can be smaller and 2nd gen can be bigger as well. the 1st gen can also be big. it depends about the person's desiscion
@TheDragonFire123
3 жыл бұрын
The fourth generation is generally used for most lighter purposes. A redesigned third generation is used for premium lifts.
@jaspertaylor156
8 жыл бұрын
Beno the a 4 th gen ecodisc in bracknell princess square that clugs and snaps
@elirussell5940
5 жыл бұрын
I don’t like the floor indicator
@lbtf_roblox4755
5 жыл бұрын
3gen is better
@4trainfan909
3 жыл бұрын
Kone says good reasons to have a chassy
@deathtrex
6 жыл бұрын
I know what u mean about the 4th gen ecodisc iv only found out now that iv been in one it confused me because the ecodisc voice is in welsh i have never heard it in welsh and it is really funny
@kriskolo2013
8 жыл бұрын
I think an ecodisc with no clunk is no longer an ecodisc :(
@theelevatorenthousiast-452
8 жыл бұрын
The Clunk of the brakes are very noisy. If i want to install a EcoDisc i will choose a 4th generation because they aren't that noisy anymore.
@kriskolo2013
8 жыл бұрын
If I would want to have a lift I would choose Mitsubishi
@indotravelguy2004
8 жыл бұрын
lol im sick of mitsubishi i had enough of how many mitsubishis there are in my country
@contrazenca
6 жыл бұрын
Ecodiscs are the worst in my city, they were installed cheaply, buttons and panels falling out often, one shopping center opened earlier this year which has ecodiscs, now it has already been modernized!
@lbtf_roblox4755
5 жыл бұрын
@@contrazenca By generic
@theiachannel2759
8 жыл бұрын
i love reliebell ecodisks
@indotravelguy2004
8 жыл бұрын
reliable*
@Mr_ButterKatze2
5 жыл бұрын
Nae Kone lifts a good
@imeakdo7
8 жыл бұрын
why some people say these are crap?
@LordVoltRod2c
4 жыл бұрын
Maybe to appear intelligent by saying Otis is the best instead of just reading up on things. They used to say ThyssenKrupp was bad because it has to be an Otis. This actually got me to choose ThyssenKrupp as my favorite company. Reverse psychology it works most of the time. I would see videos and comments saying it was a peace of Krupp. Well I don't think so because I have Researched the company and plan to do so again and I have rode in ThyssenKrupp elevators and they run great as far as I know. People sure know how to clown around.
@wesselvermeer8358
8 жыл бұрын
runs great
@neliftsandtransport
2 жыл бұрын
NMX07 with a capacity of 1000kg? You sure this wasn't an NMX11?
@germanlifts5960
8 жыл бұрын
Have they fixes the "violenty stop" Problem?
@indotravelguy2004
8 жыл бұрын
i guess the 4th generation ecodiscs just got worse on that, i dont know.
@psirvent8
8 жыл бұрын
Do you think it's a good idea to surf a lift in France ? (I ask because I'm french and I can't find much about laws regarding lift surfing)
@nelsonahlvik6650
5 жыл бұрын
Look for laws regarding tresspass
@renfe4470
2 жыл бұрын
Similar in MX 10
@ed918
7 жыл бұрын
Lelliac's new lift LELLIAC GEN 4 ⬜ 1⃣ ⬜ Ⓜ ⬜ 0⃣ ⬜ 🅱 ⬜ random ⬜ ders closing ⬜ ders opening ⬜ alarme ⬜stop
@thesupergriffiths248
8 жыл бұрын
I love the that it is a bigger motor
@mikehandoko6368
4 жыл бұрын
.itu untuk pemasangan pagar atas sangkar gmn bos caranya
@LiftSurferRYEGI
8 жыл бұрын
Nice !
@electroelevatorz6739
8 жыл бұрын
totally epic vid
@divide11
2 жыл бұрын
The sound of the motor sounds like something out of a hair dresser
@Shnlmukpglifts_liftenthu-255
Жыл бұрын
True
@harryscott7762
2 жыл бұрын
0.75 sounds normal
@itskristofshaus
8 жыл бұрын
Why do Ecodisc Motors buzz on the way down? I've noticed this on quite a few ecodiscs now, but i can't find an answer for it
@benolifts
8 жыл бұрын
+ChrisReviewsTech Because it takes effort to go down. Going up is easy. Counterweight is mid weight, so when the lift is not full the lift will go upwards if the brake is released when doing a freefall to release passengers. Schindler Eurolift MRL sounds much louder when going down. Also 1st generation Express sounds better when going down.
@wesselvermeer8358
8 жыл бұрын
+Benowhen the lift is very busy can the motor get overheated becuse on the way down in uses full power
@vidsfreee6638
8 жыл бұрын
+Beno can you show the 4 gen ecodisk mrl cabinet
@germanlifts5960
8 жыл бұрын
It is not different to second and 3th generations ecodisc cabinet...
@liftsadventurevideosinfran7966
8 жыл бұрын
+Beno if the ecodisc run overloaded , does it make that's sound ?? yes it brake when overloaded
@miahaskurti4539
5 жыл бұрын
It Should Have A New Voice Beno
@meol0390
6 жыл бұрын
What do you do at 2:58 ?
@TheEnviro400
6 жыл бұрын
At 01:43, on the buttons, what is the bottom right button?
@bobbyyFc
6 жыл бұрын
The inspection stop on the KONE’s are absolutely trash. So simple keep brakes open a tad longer slowly ramp down the torque.... instead of BANG.
@TheDragonFire123
5 жыл бұрын
Most lifts emergency stop on inspection. It would be very unsafe to glide to a stop, as Beno has said before.
@aegystierone8505
5 жыл бұрын
0:30 wait...did you just say the Mitsubishi MRL is among the best?
@4trainfan909
3 жыл бұрын
1:09 look
@user-ln3sm8sn9o
6 жыл бұрын
在机器顶进行快车运行是危险的行为,虽然有些时候我也会这么做;P
@HJ2127ATR1
6 жыл бұрын
王华清 Wot du u mean? (Translate: What do you mean?)
@RamClaw
5 жыл бұрын
Noooooooooo. The clunk!??!!???
@tdsc2636
6 жыл бұрын
I miss buttons
@Matty12333
8 жыл бұрын
I don't really like the voice on the Eco discs sounds a bit cold and unfriendly.
@electroelevatorz6739
8 жыл бұрын
+Tom Jardine sound a bit like a mad woman teacher
@liamringer3400
7 жыл бұрын
kone are just trying to make there lifts sound posh
@TheDragonFire123
4 жыл бұрын
The Australian English voices sounded a lot friendlier. In fact, the current AU voice should just be the voice across all English Kone voices IMO; the new UK one sounds shit.
Пікірлер: 99