Excellent video. Easy to follow. Took away the mystery and gave me the confidence to get this job done. Cheers.
@BarnacleBill77
Ай бұрын
Fantastic video....i need to do a few jobs on my xc60 bumper and need to get it off, you have just showed me how, thankyou :)
@jollyroger2858
18 күн бұрын
thank you so so much! needed to get access to my front crash bar brackets and this video was perfect
@aneesahmed2978
Ай бұрын
Excellent job, it helps a lot. The explanation was brilliant and as detailed as it can be. Thanks a lot 👍
@matejkamenik5028
2 ай бұрын
I have done a lot of work on my V60, now I have to replace the bonnet lock and this is really really helpful. Thanks a lot for that! :-)
@davidlewis7382
4 ай бұрын
Nicely done video, it was very helpful!
@talesmaschio
Жыл бұрын
Thank you for posting this, it will help me a lot on removing mine. I have a pre facelift model, but I suppose the process is about the same.
@user-mp9xq3lu5e
5 ай бұрын
Can you make a video how too change the front fender for a 2015 Volvo xc60 2015. i will really appreciate it thanks
@benjones9822
2 ай бұрын
I used to have a Saab 93 TTiD Aero and now I've got a Volvo XC60 D5. We're car bros!
@rogerxxe
6 ай бұрын
Excellent explanatory video. Thank you very much!!!
@d4ve587
Жыл бұрын
That was a very satisfying click 😋very informative video 😎👌
@WeakestofWeeks
Жыл бұрын
Haha thanks friend!
@evenhazertannecy8134
2 ай бұрын
Trés bonne explication merçi
@nokbeen3654
8 ай бұрын
Could I buy an R-design bumper and swap it out for the original on my 2014 model that has the standard bumper? Is it bolt on bolt off like?
@finalmatrix
Жыл бұрын
The light connect at the passenber side was impossible to disconnect! I just hanged the passenger side bumper on the headlight. Perfect height.
@91cat
Жыл бұрын
Did u put a flathead screwdriver under the locking mechanism of the contact? If so then i would slide off with a little force if u pull those apart from eachother
@soaponaropeTICKLE
10 ай бұрын
Hi Gary - great video. I need to do the same thing on a V60 - also to replace a leaky washer fluid reservoir. Anything I should know about that process? Any tips? Did you have any resources to help with that procedure? Please and thanks.
@WeakestofWeeks
10 ай бұрын
Hi friend! I actually filmed the process of replacing the washer tank on my XC60. However, I need to finished editing the vid before posting. I've been putting it off bc I wasn't sure if it would be useful but sounds like it might be. Once the bumper is off the washer reservoir replacement is pretty straight forward. The main point of mention is that the washer pumps going back into the new tank are finicky. On the end of the washer pumps are grommets where they mount into the tank and upon reassembly have a tendency to leak. Might not be a bad idea to get replacement washer pump grommets or don't be afraid to use a little bit of sealant on the grommets. A little goes a long way. I also recommend filling the tank up and wiggling the pumps a bit to simulate road bumps before you reinstall the bumper to check for leaks. Outside of that it's a pretty simple procedure. Hope that helps!
@kjandpj
8 ай бұрын
Agree great video and I am about to embark on the same repair but will wait until you finish editing the video. I’ve also got a bad light lens that I would like to replace, is that pretty simple once I have the bumper off? It looked very accessible.
@WeakestofWeeks
8 ай бұрын
Finally got around to it and posted the washer tank replacement. Hope it helps with your repair! kzitem.info/news/bejne/l259sKF-b5pmoaw As for the headlight replacement yes, once the front bumper is off you have great access to remove the headlight assemblies.
@prostoleha
5 ай бұрын
Спасибо
@mldeutschland
11 ай бұрын
muito bom seu video , voce fez isso muito bem! agora posso ir pro meu!!!
Пікірлер: 29