Take a breath.I am 70 years old ,I was a pro with any black lacquer. There is a 55 chevy I painted that won 13 first place awards.I can paint pearl candy you name it.Anybody wanting to be a painter or wants to learn they better watch your videos. Those that are painters should watch even if only to learn your attitude. This world needs more people like you.
@grubbetuchus
7 жыл бұрын
I agree with everything that you've written. I'm a wood finisher, but spraying is spraying. Gunman videos are excellent, and they are even well produced, never boring.
@TheOdontologist
6 жыл бұрын
I went to the paint shop for help and advice. They told me that without any knowledge they couldn't help me much. I'm now watching the Gunman and helping myself. No bull makes it even better. Welcome to the new world of self detetmination and the online community. Thank you Gunman.
@neversaydie9210
Жыл бұрын
I'm a complete novice at painting but always want to buy the right equipment and do the job correctly. I'm about to purchase a spray gun and I found this video to be the BEST video available for clearly explaining the real world differences between HVLP, LVLP and Conventional guns and the best choice for a DYI guy with a 5hp, 2 stage 80 gallon compressor at home. Thanks very much for all the hard work that you put into these videos. You're the man!
@texastruth9752
7 жыл бұрын
I learned more here with your videos than I did in a semester paint class.
@Ebby1600
9 жыл бұрын
I watched this video twice and now, as a newbie, have a better understanding of how air caps are related to compressor efficiency. I'm using a Devilbiss TeknaPro Lite to paint catylized waterborne polyurethane. I conducted an experiment like your demonstration and found the T10 with a 1.3 fluid tip at 22'psi at the gun works. The technique for this paint is to apply a fog coat to color saturation then at approx. 15 min. a medium wet coat and after another 15-20 min. a final wet coat. The tricky part has been trying to find the correct fluid setting for each coat. Thanks for the info
@thesmutlley
9 жыл бұрын
Thanks Gunman. I've just started spraying large RC jets and using DeVilbiss detail guns and air brushes. Your videos have been invaluable. You are a legend.
@TheDucati97
7 жыл бұрын
I learn in high school back in 79 how to paint, done some painting with hvlp guns and thought i lost my touch. Well your video show that the instruction on the paint can were far from the truth. I like being schooled by a pro to encourage me to practice a new Technic. Thank Gunman for renewing my confidence.
@ThePoleLine
9 жыл бұрын
This is a great video for people of all abilities. I have gotten complacent and not used a gun reg for a while now. I get great results but these videos will help me get them more consistent
@TheGunmanChannel
9 жыл бұрын
Great to hear man, thanks again for watching.
@mickbastiaens6942
9 жыл бұрын
Just started a new job using the Devilbliss was having trouble. Thanks to you I have turned the pressure right up as it has been bloody cold and the paint is coming out the way it should be now. Thankyou and keep up the good work bro!
@douglaswells2739
8 жыл бұрын
Another great vid, very helpful. I'm buying the Tekna Prolite soon with the TE10 and TE20 caps, 1.2 1.3 1.4 nozzles. Should give me what I need for smaller and larger compressor situations.
@Davidzapper
7 жыл бұрын
I run jga conventional guns at 80 psi, only 50% overlap is needed and as fast as hell, great for hgv bodies and yes the choice of air cap is more important than ever, from 30 cap to 778 that is all air and next to no paint but at a guess I get 16 inch to 20 inch spray pattern, It would be be so cool if you could do a video with the original best ever spray gun the jga not the modern pro version. you can get them on ebay cheap. Many a pro painter's have used my gun's and are overwhelmed by how good they are if your compressor can handle the job. Many thanks for your cool video's thanks David UK.
@greggouveia8403
5 жыл бұрын
Love watching you and your videos. I have been spraying my whole life. Stopped back in 1995 being I had sprayed for 20 years then, the clears came out and caused painters to go to the hospitals. The wife convinced me to stop. So I went in to the audio video business. In 2015 I got back in to spraying. Clears have been changed in 2008 I was told. I have all old,school guns. The new hvlp was what was on the market. Didn’t know a thing about them. I have watched your videos over others and got more from them than anyone else’s. Thank you. I own two GTI Pro lites, 1.3 T20 - I do more Restoration and custom spraying now then collision that I did for many many years. Grew up in the business. I want to purchased then1.3 T110 being you say it leaves less peel. More for custom flat finishes. I love the 1.3 T20 shoots everything I need. I have changed over to high solids clear now. And the T 20 handles it great. Little higher pressure. Watching this video I see I need to turn down the air when it is hot. My booth is climate controlled. I set it at 77 and use medium hardener and reducers. Is there anything wrong with this. Or should I not control the temp and use slow everything. I have been using all Tamco products now. Love the 2104 clear. I am getting small little white dots after I color sand and buff. Only on the flat surfaces. Sides no. Is this solvent pop. And what is solvent pop. Never heard of this back in my days. Little white dots are killing me. I bought a new 17.4 cfm compressor that runs 150 psi. Still get the little dots. I have changed the filter and moved it 25’ from the compressor. Anything but old lines is all I can come up with. I run the booth fan 30 mins to 45 mins after the last coat. Any help would be appreciated. Oh. As for really why I commented is if you use a wireless mic we w t hear the echo of the booth. Pretty bad echo. Again love watching you and your videos. I am a subscriber and really enjoy watching any new videos you make. Thank you.
@jaykrom852
4 жыл бұрын
Solvent pop happens when the surface dries too fast and the solvents can't flash off. The slower hardners and reducers will keep the surface open more and reduce the pop ( the small bubbles formed by the solvents that get trapped under the dried surface. Possibly lower temperatures and longer times between coats will help as well.
@megaman4201
3 жыл бұрын
Exactly what Jay said, the solving pop are tiny bubbles left behind by trapped solvents and when you wet sand and buff you cut the tops of those bubbles off so now they are very tiny craters which when finished buffing and polishing are filled with dried white compound.
@jevells
6 жыл бұрын
I asked gun setup questions on your video about why hvlp is not the gun to have for diy guys, this vid answered almost ALLLL those questions, still absolutely love the tekna pro lite over the concours pro gun I first got, thank you for all that you do I’ve learned a lot from watching your videos and just going out there and spraying as much as possible! It’s extremely humid where I’m at so I’ve had to wet sand some of my orange peels, finally got clear on a hood to lay down perfect in my garage n understand fully why thats just the tits man!
@Darlavonderheide
9 жыл бұрын
I`ve learned a lot from this video. Thank you very much.
@TheGunmanChannel
9 жыл бұрын
Darla vonderheide Thanks for watching :-)
@markme4441
9 жыл бұрын
Its going to take a relative amount of air cfm/pressure to atomize that same amount of fluid, transfer efficiency will increase with cfm and so will orange peel at the lower pressures. hvlp can save you 10% material if you have an big compressor. Some turbine guns use 60cfm @ 5psi
@senecacatt
7 жыл бұрын
Another awesome video gunman.I have been on the fence with this type gun and versatilty it has (Here in the U S, Tekna Prolite).This video has just sealed the deal for me.Thanks for taking the time to do these !!!
@RichardFortin77
2 жыл бұрын
Good day, I use GTI Millennium HVLP spray guns (pressure feed and gravity feed). I use them for clear coat only. Do you have suggestions to get the widest span possible (for clear coat application on wide wood panels) ? Thank you.
@buickgeorge
7 жыл бұрын
everytime I have a question you have a video for it I'm sold on the devilbiss pro lite ! thank you
@theronsmith8244
8 жыл бұрын
Thank you mr. gun man, i learned some things from your illustrations .
@TheGunmanChannel
8 жыл бұрын
Thanks for watching mate
@momcco
9 жыл бұрын
This is fantastic! Im looking into plastidipping as i fancy changing the colour of my car fairly often, and i couldnt get over how crap the atomisation from cans and the usual kit is. This has dished alot of info that ive needed. Thanks!
@ericmendoza1896
9 жыл бұрын
Mo McCo Hit me up on Facebook STSDIPS.
@terrydacosta4122
6 жыл бұрын
had trouble with my gti pro lite puting to much paint on. looked at your video and got my self a 13 fluid tip and a 110 cap and a te20 cap. what a difference. gun finish all the time. just like to say thanks for the help. keep the good work.
@badboiwebman
9 жыл бұрын
Thanks a lot for getting back to me about the air cap and pressure I will try 20psi tomoro and see how I get on cheers
@TheGunmanChannel
9 жыл бұрын
Good luck man, I do my best to help.
@DumbSkippy
2 жыл бұрын
G'Day, Just got myself a Gti PRO Lite with a TE10. Booyah. Cheers Mate !
@Velvethamma
9 жыл бұрын
More great info! Thanks for sharing the difference in the three air caps
@tpue12
7 жыл бұрын
Great info Gunman. I thought I was good but you take it to another level. I'm always looking to learn new things and keep an open mind. Thank you!
@russellminahan9618
7 жыл бұрын
Gunman my name is Russell Minahan I watch all your vids just good simple advise your one off the best keep up the good work brother
@jaycope6870
6 жыл бұрын
I’m using a Devilbis Front Line FLG4. With a 180psi Ingersol Rand compressor. Paint adjustments are typically close to 3/4 to wide open and the same with the fan control. I’ve tried holding the gun closer (6”) to further apart (11”). Using Nason Primer seal and base coat with Smart Clear Coat. Of course I Change tips from 1.8 primer, 1.5 base and 1.3 clear. I’ve tried to reduce the clear 10%. Main air pressure leaving the tank in 30psi “ish”. I adjust at the gun from 8-18 psi. It seems regardless how slow or fast I move, pressure settings, gun settings, everything does make a change but never the change I’m looking for. I’m trying to teach myself how to paint without so much wet sanding after the new paint. It’s truly like a good heavy orange peel. And help ya have with greatly be appreciated. Great video’s by the way. If I need to send you my personal email or anything, please don’t hesitate to ask.
@megaman4201
3 жыл бұрын
Your spraying at a very low pressure and only 30 coming out of your tank, should be higher and as your painting the pressure at your gun is probably dropping significantly also.
@ront841
9 жыл бұрын
You are a wealth of knowledge mate.
@TheGunmanChannel
9 жыл бұрын
Thanks for watching mate.
@jamarcuspatton3691
9 жыл бұрын
Man you are amazing I learn some new everytime I watch your vids...Im currently take this trade and it's great!!! We only been doing body work so far but when we get to the painting you gon have me ahead of the class thanks a lot keep em coming!!!
@vicshonebethel9934
4 жыл бұрын
I learn a lot from every video you put out. Thanks bro
@SwPiotrek
9 жыл бұрын
Very interesting video for beginners.
@v8man350
7 жыл бұрын
nice video mate, great info on gun set up .thanks gun man keep them coming.
@TheGunmanChannel
7 жыл бұрын
Thanks mate.
@ariandave3250
4 жыл бұрын
thank you for this unbias explanation about different types of spray gun i learn a lot in this video.More beginner painter needs you like me now iknow what types of spray gun to buy. Thank you
@803brando
9 жыл бұрын
started using the tekna pro(US version) on big panels i want to avoid mottle with metallic base coats, what tip cap combo would you recommend? im running 1.4 tip with the TE10 cap.
@elbigal113
6 жыл бұрын
Thanks for breaking down the Caps and for what application they are for
@geespar1
6 жыл бұрын
There was no mention of the paint viscosity, surely this would be a factor as well?
@matvey36
8 жыл бұрын
YOU ARE THE BEST! THANK YOU
@TheGunmanChannel
8 жыл бұрын
Thanks for watching :)
@chrisloveall6780
2 жыл бұрын
Thank you that was very helpful to about the air caps.thank you so much
@samuelbane6743
8 жыл бұрын
Love this video....this one rocked!!! Lots of knowledge!!!
@froggy8301
4 жыл бұрын
Another great informative video 👍 Gunman... what CFM compressor would you recommend for the GTI Pro Lite and would a 50L compressor be fit for purpose?
@karloss1060
8 жыл бұрын
i use the LVLP and like it a lot mate easy to use and i feel comfortable using it.even tho i have a high volume compressor. thank u for the vid it help
@Themayseffect
8 жыл бұрын
+KARLOSS what compressor are you using?
@_Junkers
6 жыл бұрын
+The Gunman Can you get away with buying a single gun (e.g. the SGK 600) and multiple air caps for the sake using primer / base / clear?
@TheGunmanChannel
6 жыл бұрын
It's not so much the air caps you'd need to swap out but the fluid tips, for that reason I'd say the DeVilbiss GPI would be the best option because you can get it in 1.4 for colour and clear and 1.8 for primer. I have a review on that gun and it is a great gun but nearly half the price of the top line guns.
@Booki89
9 жыл бұрын
I ended up buying the devilbiss gti pro lite, with a te10 and te20 air caps. Looking forward to trying it out now As others have asked. How do you tell when your at the sweet spot? I am hoping to get a flat. No orange peel finish for my respray. Is it possible to get that off the gun in 2k? That said I am still a amateur
@d34nr2k8
9 жыл бұрын
I know you said you bought pro lite but i know for the gti pro Devilbiss made an air cap called the T110 which lays 2k clear on like glass if set up correctly not sure if they made an air cap like this for the pro lite. i bought the air cap in case any big restorations come up i tested it out on couple of panels and once fine tuned really does lay on like glass 👍
@fireblade5542
9 жыл бұрын
d34nr2k8 the t110 goes straight on the pro lite I used it last week
@d34nr2k8
9 жыл бұрын
ah i didn't know they fitted pro lite well there we go t110 can be used on your pro lite aslong as you have it setup and fine tuned it should lay your 2k clear like glass 👍
@Booki89
9 жыл бұрын
d34nr2k8 Is the T110 cap the same as the TE10? What settings did you have?
@d34nr2k8
9 жыл бұрын
no i think te10 is same as t1 for the gti pro as the te20 is same as t2 or could be other way round if you check the Devilbiss website it gives you all the specs for each air cap. my setup was around 2 bar of pressure with fluid wound right out and fan right out for 2k clear i had 1.4 tip on my gti pro but this setup could be different to how you might get a good finish its really down to your feel for the gun but once you hit the sweet spot on your setup you will see that it really does lay clear on like glass 😊 i only use the t110 for restorations on classics as you need matching orange peel with new cars of today so i use t2 for 2k clear only on normal cars and have a second gti pro with t1 for solvent basecoat 👍
@ahgaming9047
8 жыл бұрын
thank you alot gunman for this important information . keep up man ..
@Fernan-wh3wz
Ай бұрын
@TheGunmanChannel Greetings. I have bought a Tekna Pro Lite. I would like to know what other additional picks I can buy for this weapon and have more versatility in my finishes. On this channel I have seen that the T110 pick can be used for a more crystalline clear. However, I I would like to get more out of it. I bought my pro lite with the TE20 and HV30 picks. I would also like you to explain to me what it means to keep the pro lite with the original configurations. If you can be specific to keep the weapon with its original regulations. I appreciate your contributions to continue improving my automotive finishes.
@Mr_getinthere
8 жыл бұрын
can I change the cap on my plus I have 410 cap
@chrismansker8870
6 жыл бұрын
what size tip would you recommend for a first time painter I have the tekna pro with the te 10 and te 20 and several tips 1.2 1.3 1.4 wanting to spray base clear this will be the first time I painted a car but have used the cheaper guns to do prep work so im interested in knowing what tips to use with the base coat and the clear. thanks great video
@TheChrisR12
9 жыл бұрын
How do you tell what the right atomisation is for when you start spraying a panel using what was shown in the video for the TE10 I'm guessing you would not want to spray to fine and not two heavy. If that doesn't make sense basically what I'm asking how do you tell what the sweet spot looks like?
@TheGunmanChannel
9 жыл бұрын
Its going to depend on what you are spraying and the finish you are looking for, trial and error is what got me to where I am now so I recommend just having a play around while observing the finish.
@dominiccloud6948
9 жыл бұрын
I really appreciate you posting these informative videos! It's really helped me in my projects as I get into HVLP spraying. One thing I would've like hearing in this video is if you'd go into explaining the usage of the levels similar to how you explained what you would use on a clear and primer. Would it be possible to explaining what cap and needle combo would be best for applications such as applying candy, clear, base, or primer? Also, is that the devilbiss quick disconnect on your guns?
@cheesegeezer5019
9 жыл бұрын
Thanks Gunman for taking the time to share this. Very useful for 2 reasons, 1 effects of pressure and 2. choosing the correct cap for your compressor. I'm starting out learning to spray and all these details you share really add up to a good foundation. I have bought a car door and I'm use that as my test piece to learn and perfect techniques on.... Yes, I'm a DIYer :) I do have a question for you, would you recommend having separate guns for primer/sealers, Base & clear. Should you have a dedicated clear gun, what's your recommendations. Thanks again and keep on posting all these useful tips.
@amunderdog
9 жыл бұрын
Very informative explanation. Thank you.
@shedbuiltcars2999
9 жыл бұрын
Have gone to ebay. But thought you might have better contacts an might benefit. Cheers Im actually using jefferson paint supplies on their website. Its a touch cheaper than ebay
@sunnytuladhar1
9 жыл бұрын
Hello Gunman,greeting from Nepal!! I am a luthier and I have a 6.3 gallon compressor. I have found 1.4mm (at around 28 psi)too big for my projects so ended up using 1.0 mm mini guns at 20 psi ( the green 20$ one that you suggested to bin!) which is still doing an okay job for me. I am very much tempted to upgrade to a Devilbiss after watching your videos....which one should I go for, a Tekna 703566 or a Devilbis SRI PRO? And I have changed my mind from SATA because after watching your videos,I too find them a bit over priced and over spraying. And I use Sikkens 2k for my clear coats, how do you find them? And I also see that you only flush clean the guns.Is it necessary to completely open the gun and clean?? Despite cleaning the gun thoroughly after every use, straining the clear coat every refill and spraying inside a BOOTH (25 degrees celcius, 30% relative humidity) I still end up with tiny dot-like specs.They look like paint residue to me but not sure. How do you think I can avoid these problems? :) Thanks so much for these videos! Thanks in advance. :)
@baymaxhero4127
7 жыл бұрын
Really appreciate these videos man thank you!!
@TheGunmanChannel
7 жыл бұрын
+baymax hero no worries mate
@cransaftvalve734
9 жыл бұрын
Great Video. I am going to buy this gun and my compresor only is 350liter/min. This spray gun is for base colour and clear right?. Colour T20, or T10 and 1,3mm?. And clear?. Thank you...
@talolam
9 жыл бұрын
Congratulations for your shop About your compressor set up can you talk bit more about filters and compressor I'm getting a lot of water in my lines New 60 gal IR 5 hp single stage 3/4 rapid air lines dryer is 40 feet away from compressor 25 feet 3/8 hoses and fittings Maybe my compressor is too small? Thanks
@TheRolfano
Жыл бұрын
I’m confused the TE10 is supposed to be low pressure or low volume but you said you get it up to 30 psi higher than the TE 20. Do the air caps make a gun HVLP or LPLV? Seems like all guns spread better at slightly higher pressures above 20 psi so it gives?
@mrbigg7255
6 жыл бұрын
Thanks this explains a lot. TE10 for me.
@katreenabrooks5493
7 жыл бұрын
I just got a hvlp air cap and I can not for the life of me get it to lay down. I have a 1.4 tip seems to be to much. Really frustrating me.
@TheGunmanChannel
7 жыл бұрын
+Katreena Brooks hvlp guns can be a pain in the ass and that's why I don't recommend them to most people, you probably noticed in this video that the atomization was a lot thicker than the other spray guns I used.
@nunyayourbusiness7327
8 жыл бұрын
cool shirt great info do you have to change both the needle and thenozzle when changing needle sizes to make them work right
@sypher0101
9 жыл бұрын
So the finer the spray, the better the quality? How come you wouldn't run the gun at 28psi at the current temp ? Are there cheap(er) guns that are good for all purpose? (primer, base, clear)
@TheGunmanChannel
9 жыл бұрын
Too much paint waste, the higher pressure will give you a nicer finish but use more paint.
@d34nr2k8
9 жыл бұрын
yeah its best flat out at wall i was told due to if you set it at wall by the time it gets to the gun it could drop too much pressure and drop more often and it depends on your hose length and diamter as well.
@lorenciapeterson201
7 жыл бұрын
Hi I have recently purchased both the Devilbiss Gti Pro "Clear" and "Base" marked guns-same guns of course, with a 1.3 tip. I have all aircaps: H1, T1, T2, T110 (x2). I would be using a small compressor for painting. For a glass finish, what aircap would you recommend for Base coats and which aircap for 2K Solids / Clear. I was thinking of using T110 on both guns??? For an orange peel finish, which aircap would you recommend for either 2K paint or clear. Thank you
@24366937
9 жыл бұрын
Hi, can you do a review on The Devilbiss FLG-5 G5-14 Trans tech. Cheers.
@TheGunmanChannel
9 жыл бұрын
I have a flg4 on the way from the US now, I hear its the same as the FLG5 but named differently.
@badboiwebman
9 жыл бұрын
Hello gunman excellent videos dude I really liked the gti pro pressure vid, I jus got back into spraying after many years, was not a pro back then but seem a bit better now, I use the te10 air cap so you recommend the higher of the psi which is 30psi, I'm not used to using Low psi when I used to spray I got taught to use 60psi, also is a t110 air cap a lot better than the te10 cap as read mix reviews online some say a lot smoother finish and some say its exactly the same as the te10 thanks a lot dude
@TheGunmanChannel
9 жыл бұрын
For a warm environment say above 30 celsius then keep the te10 around 20 psi the colder the day then yes the pressure will come up so my best advise is to get the feel of the gun and start painting by feel while looking at the finish you are getting and adjusting to suit, I've never used the t110 but to be honest I would imagine it to be about identical to the te10.
@garlandtube3
9 жыл бұрын
Devilbiss plus, 410-ac, 1.2, 1.3, 1.4 is my gun. Ample air supply. Spraying PPG Duracryl Acrylic Lacquer, Silver (very fine) Metallic. Blocked 400 wet, primer dusted, then 600 Dry pad blocked. Plan on 3 coat's: light wet, med wet, med wet. All panels on cassis. Asking for any suggestions on primer prep, gun settings and tip size, number of coats. Goal is one big drip, low orange peel. since I can't color sand. Thanks, you've been a great source for my project.
@NyxNick
5 жыл бұрын
Thank you for your explanation!
@benletsbenatural347
8 жыл бұрын
Additional question. What low/mid range (high end hobbyist) compressor that is commonly available in Australia would you recommend for the DeVilbiss GTI Pro Lite with TE10 or TE20?
@kenansonat8066
9 жыл бұрын
Great stuff mate
@stuartsmalley2868
9 жыл бұрын
Great informative video.
@anthonyervolina5185
9 жыл бұрын
I have been using the te20 on my tekna prolite. Tried the te10 but liked the 20 better. My question is on the cap the te10 states max35psi . And the te20 is 26psi. So how is the te10 a lvlp cap if it states a higher pressure ? I thought both where compliant caps ? Should I use the 10 for base and 20 for clear ? I have use the 20 for base and clear and the 10 for single stage and tried the 20
@salekanayake8416
Жыл бұрын
Hi mate, thanx. Which pressure would you spray in the te20 cap? Also whst pressure would you spray in the te10 cap
@manuelsantillan665
5 жыл бұрын
Congratulations, great job greetings from Mexico
@kendrickcontent
4 жыл бұрын
I have a 30gal compressor and want to spray urethane basecoat clearcoat which fluid tip should I use 1.2, 1.3, 1.4?
@Fritsvrolijk
7 жыл бұрын
Thanks Gunny
@camaro572rr
8 жыл бұрын
helped a bunch! but I do have a question, I live in newfoundland, humidity here in summer is high, I try , stay around 50% to no more than 60% humidity, I have the tekna copper, some times the clear goes on kind of blotchy, what might cause this? thanks
@asksteevies4941
9 ай бұрын
What is the FLG5 is it a low volume low pressure, In the FLG for I’ll look at the air cap and see ,Are these conventional
@randallscott4094
7 жыл бұрын
Great video Gunman. I'm new but watching and learning a lot. I just bought a Tekna Pro Lite and will start experimenting with the TE10. I have a 5 gal 3 hp Compressor that can put out 8.6 cfm at 40 psi. I'm having a tough time with the blending terminology - Clear Blend, Reduced Blend, Solvent Blend. Very few places sell Blending stuff and I hear so many different stories of mixing your own. I'm not interested in the rattle can versions. Can you help clear this up for me? Thanks in advance Mate.
@actorzone856
7 жыл бұрын
tried out my Devilbiss SGK worked nicely for me as only a learner, my compressor even though its a good model runs about 5 times to rebuild air on a bonnet in base, so I have to stop and let it build air, so its important to get a decent compressor, takes me time to get my head around it all as spray painting is not as straight forward as one may think, I had noticed a rock, but now? I am realising Mount Everest is underneath, thanks.
@marcocruz6462
9 жыл бұрын
thank you brother nice video !!
@rybsonb3874
4 жыл бұрын
Hi, i have very important question about T110 and TE10 aircaps.For base coat, which aircap gives less overspray (dust), TE10 or T110?
@paullynch1938
Жыл бұрын
You are the governor dude
@javierortega1323
8 жыл бұрын
Exellent I"m gunman fan . i bought tekna prolite im from mexico city which s your recomendation settiigs mexico city temp.is about 18-25°c with out booth paint. i usually paint at 15 cm from tne surface.whith 1.5 bar to base and 2.0 bar for clear with a devilbiss starting line .1.3 but with tekna prolite i dont know which is the optimal setting?
@mairoist
7 жыл бұрын
I have the Devilbiss plus what is it conventional or LVLP what's a good psi for the gun thanks
@chriswebb383
3 жыл бұрын
Conventional. Around 36-42 psi for that one . I use one as well
@tonylarkins6047
5 жыл бұрын
Hey mate. Melbourne painter myself. Im putting down my iwata w400ba. Im buying a pro lite with te10 an te20. I paint with solvent. So my question is. Are these the best caps. I heard the te10 is best for basecoat and te20 for clear. I decided to go with the te instead of the hv and t110 because they are appearantly for water base ?? Thoughts
@ConfusedSoul24
6 жыл бұрын
superb video!! just got yourself a new subscriber!
@Eric-jo9oj
7 жыл бұрын
Gunman , what diameter air line do you recommend ? Thank you for all the great videos.
@colinmale1060
8 жыл бұрын
Hello: I like the subject content of your videos - please continue.
@goprowolff3504
7 жыл бұрын
I am looking at the Devilbiss Tekna. Is their any models to stay away from? Is it ok to buy used?
@aaronpydynkowski3368
2 жыл бұрын
Hi Gunman, do you have any opinions on the #2000 air cap? Is it similar to the H1?
@davidmulligan7067
6 жыл бұрын
what gun would you recomend with a compressor delivering 11-12cfm?
@ballerbrian4u
9 жыл бұрын
Hey gun man! I'm looking to get a DA sander to start dry sanding at my work place I paint 3 cars minimum a day and i usually wet sand them. I am wondering what da should I get? I see that they have a 6 in with a 5/16 orbit or a 3/16 orbit. thanks!
@TheGunmanChannel
9 жыл бұрын
I like the Dynabrade brand best and the one I bought 13 years ago is still going strong, 3M have some good ones too, yes they are a little more expensive that some of the other brands but they are quality tools and will last a long time. I'm not 100% sure on the orbit but the supplier will know the right one to give you, just tell him its for automotive use.
@kendrickcontent
4 жыл бұрын
Can I use a TE20 on basecoat and clear or should I use T110 on basecoat? Pro lite gun 1.2mm
@pitbull448
5 жыл бұрын
Ok so you said TE10 makes this gun a LVLP. But i thought the T110 is even smaller. So would TE10 be LVMP? And T110 be LVLP?
@timmyrussian9381
5 жыл бұрын
Hey gun man. I am used working with a cheap harbor freight gun I get them for like $15 bucks. But I'm looking to buy a new gun. My budget is around $200 is there anything you would recommend for spraying both base and clear?
@JBIRD575
7 жыл бұрын
What's the tip 1.2 or 1.3 gun man??
@malcolmhaith8421
4 жыл бұрын
Do you have any thoughts on spraying Latex paint paint? Product, tip size, viscosity, paint to water (thinning ratio"s).
@stephenwilkie8292
9 жыл бұрын
Dilvibs do a cheaper guns are thay any good
@TheGunmanChannel
9 жыл бұрын
I have never used them but would like to get one to demo because I do get a lot of questions about them.
@stephenwilkie8292
9 жыл бұрын
I will send you the link
@adamroach2220
5 жыл бұрын
Hi. About to paint a Kombi clear over base 2 tone Black and Nardo grey both non metallic in solvent. I have a GTI Pro Lite with a TE20 & 1.3. What mixture do u recommend for base coat 1 to 1??? Cheers in advance
@ronziegler4166
4 жыл бұрын
HEY Bradda how about the LVLP Optima Euro 900 had one for decades you think that's a great gun?? Have a few compressors all mobile and that works well with the 11 CFM. The DV 1 has saved me a few times have a Techna pro lite too. My Question for you is what cap works best for the SRI pro for Metallic base spot repairs? ZIGGY
@stevestpierre7827
6 жыл бұрын
Hey Gunman I have the black TeknaPro Lite and wondered if the T110 air cap can be used on that gun, I am in the states and called DeVilbiss and they say they dont sell it in USA and that it would not atomize correctly. Was looking for the flattest possible glass finish. Seem to get a bit of peel with the T20 and T10 with 1.3. 2 bar in home spray booth 70 degrees. PPG DAR. Thanks alot for the great videos Mate! Any other tips they might sell in the states that have the smaller holes?
Пікірлер: 259