Excellent comparison- thank you. Variable speed trigger sold me between the two. I like the idea of letting go and having the tool STOP.
@KillingStuffWithJosephJackson
13 күн бұрын
So you prefer the variable speed trigger on the D grip?
@inventions47
Жыл бұрын
Best advise I can give any carpenter/ joiner or good trades man is to have both! I'm 36 years at this now and started in 1988 at the age of 14! This job gets more and more satisfying the older I get ! Thank you dewalt and thank you God. All the best. C
@ToolsThatBuild
Жыл бұрын
Well put Chris! I always say start with one and when work allows get both.
@inventions47
Жыл бұрын
@@ToolsThatBuild what baterys do you use ? I'm 54v 6amp all the way at mo and being put off from the 12amps with people I know saying there unreliable? Ty again
@ToolsThatBuild
Жыл бұрын
@@inventions47 hey I only use the 54v big sizes for the larger tools like table saw etc. anything smaller like jigsaws i stick with the 18v 5ah and now the new power stack. The added weight for smaller tools isn’t worth the extra run time for me. I would rather just swap batteries on the fast charger and save my wrist.
@bolerkai
2 жыл бұрын
Excellent comparison, first review that I have seen that actually discusses the pros and cons of each type of grip, Thank You.
@ToolsThatBuild
2 жыл бұрын
Thanks for the feedback glad you enjoyed it
@kitblue3194
3 жыл бұрын
I got the D handle version myself and love it quite a bit, but this video's been highly informative anyway! Thanks!
@ToolsThatBuild
3 жыл бұрын
Thank you I appreciate that! Glad you’re enjoying your saw.
@IRAKLICHIKHLADZE
2 жыл бұрын
BLESSED BE THE BARREL GRIP
@KoMar551
5 ай бұрын
D handle for me all the time
@user-do2yj5rr2k
Жыл бұрын
I like the d handle better because of the variable speed trigger
@beckirae100
2 жыл бұрын
Thanks, good info. I've never used a barrel grip. I like the idea of more accurate, tighter turns. Too bad dewalt didn't make the barrel grip with a variable speed trigger. That's enough to make me get the D handle.
@ToolsThatBuild
2 жыл бұрын
No problem, no one that I know of makes variable speed switched barrel grip unfortunately. You won’t be disappointed with the D handle.
@TheCharleseye
2 жыл бұрын
It already has a speed dial that you can easily turn with your pinky. Why have two different ways to change speed? Most tools with variable speed triggers don't have dials and vice versa.
@bopang466
2 жыл бұрын
@@TheCharleseye Because variable speed triggers are clearly indefinitely more user friendly than stupid speed dial? It always makes me cringe to see people making excuses for the manufacturers. The fealty is real lol
@TheCharleseye
2 жыл бұрын
@@bopang466 Thanks for presenting your subjective opinion as an objective fact, and then making unfounded accusations. I definitely don't think you're a 15-year-old troll, now...
@bopang466
2 жыл бұрын
@@TheCharleseye ‘Why have two different ways to change speed?’ Sounds truly objective
@connorhauss6044
3 жыл бұрын
I bought the barrel grip and I love it. Had a couple d handle ones of other brands and I never really liked the feel. Barrel handle makes me feel a lot more in control of what’s going on when I’m making really precise cuts. Would never go back to a d handle
@ToolsThatBuild
3 жыл бұрын
Ya absolutely the ergonomics make the barrel grip pretty comfortable. I know lots of guys who say they will never go back to d handle but really both have pros and cons.
@robertbernard3828
2 жыл бұрын
Hi Connor, do you miss the variable speed trigger at all with the barrel grip? I've always had a D-handle type and just wonder if I will ever need it. I never need a variable trigger for my router lol - maybe this would be similar.
@connorhauss6044
2 жыл бұрын
@@robertbernard3828 Ive always used a d Handle with a variable trigger before i got this and it was a life changer. I get cuts done faster and cleaner with this jigsaw. I dont think you will miss the variable speed trigger one bit
@robertbernard3828
2 жыл бұрын
@@connorhauss6044 thanks so much Connor! I will take your advice.
@gg48gg
2 жыл бұрын
@@robertbernard3828 wondering the same thing
@andre1987eph
5 ай бұрын
Im amazed you haven't accidentally cut in to your Kreg Project Center work table. I bought three of them and attached them lengthwise. PS These Dewalt jigsaws saws are so good, no harm in owning both 👍🤣
@ToolsThatBuild
5 ай бұрын
I may have. A few little cuts in the tables.. sometimes they sneak up on you.
@GoldenRuleConstruction
Жыл бұрын
Thanks for the informative video! I've never used a barrel grip jigsaw and this video gave me all the info I needed to make my decision and stick with the D handle jigsaw
@Ultegra10SPD
2 жыл бұрын
Thx. Im a lefty. Glad i bought the D. -U10
@ToolsThatBuild
2 жыл бұрын
Unless your pinky is really strong
@stephenmoore2561
Жыл бұрын
Being left handed is something I have not thought of. I’m a lefty as well. Getting tips like this is why I value so much the videos & the constructive comments! Thanks!
@user-yz8dv6rp1q
2 жыл бұрын
На 335 колесо регулятора оборотов находится прямо под пальцем,его можно переключить даже не заметив этого,а ещё нет кнопки как на334(хотя это спорно,ибо можно так на дальние расстояния пилить)
@swedenturtle1
3 күн бұрын
Witch do you use most? Is the d-handle the best all round option? Great video 👍
@rcud1
2 жыл бұрын
I have the Dewalt Barrel grip and I like how it cuts, but I really hate the on/off switch as its difficult to switch it.
@ToolsThatBuild
2 жыл бұрын
Agreed it’s a great saw super comfortable but I wish the switch was a little more accessible
@mathieubarrault450
2 жыл бұрын
Fantastic video, straight to the point, informative and not begging for sub. You're a blessing.
@ToolsThatBuild
2 жыл бұрын
Thanks really appreciate it
@kbtools9641
3 ай бұрын
the lever on the side is not blade angle. it’s 3 oscillating modes. 1 being the lowest movement and 3rd hash at the top being the highest. makes for much faster cuts. but they are rougher cuts
@ToolsThatBuild
28 күн бұрын
Tomato potato, the oscillation is changed by blade angle the motor and rpm do not change on the different settings. The way the blade meets the material is what causes the ruffer cut. Hence the simpler explanation instead of going into length of oscillation is to explain it as blade angle.
@Joe_Blo
3 жыл бұрын
Nice. Having a cord hang up while scroll cutting can destroy a piece of wood, besides being a huge hassle.
@ToolsThatBuild
3 жыл бұрын
Absolutely if ever there was a tool that benefited from being cordless this is it.
@yevgeniyshawyer2767
Жыл бұрын
Definitely D handle the one to go for
@ToolsThatBuild
Жыл бұрын
They both have their place but I find I grab the d handle more for sure
@yevgeniyshawyer2767
Жыл бұрын
Correct, and more safe too. Just imagine if you need to cut something in awkward location and you dropped new style jigsaw. It won’t stop by itself and will generate a lot of damage around. Im in the kitchen business and my colleague bought one and now he regrets it so much! It is defo AVOID one!!!
@ToolsThatBuild
Жыл бұрын
@@yevgeniyshawyer2767 good point on the safety!
@beardedtoolreviews7185
2 жыл бұрын
I have both they both have there place!
@ToolsThatBuild
2 жыл бұрын
Absolutely
@stephenmoore2561
Жыл бұрын
Awesome video. I’ve been considering a jig saw as my next tool purchase. Owning other Dewalt 20v tools has drawn me to one of these saws. Regarding the variable speed trigger on the barrel grip-please give me some situations when this can come in handy. Thx!
@ToolsThatBuild
Жыл бұрын
Hey thank you, the variable speed trigger is helpful when you need to slow the blade down mid cut. If your making an intricate cut or your cutting a harder material like metal both times you’ll need to slow down the blade. Both jigsaws can be slowed but the barrel grip needs to be pulled back and slowed down on the detent settings where the D handle trigger can just be squeezed a little lighter.
@N.California
Жыл бұрын
Thank you for the review.
@bendayhoe
Жыл бұрын
Thank you for this great video!
@ToolsThatBuild
Жыл бұрын
Hope it helps
@tooolboxx
10 ай бұрын
I want to buy the barrel grip but your suggestion to check these out in the store is a non-starter since I have found no store that carries the barrel grip.
@ToolsThatBuild
10 ай бұрын
Ya it definitely seems to vary by location. You could buy both try them and return whichever one you don’t prefer.
@thudang3039
Жыл бұрын
Thanks for sharing!
@ToolsThatBuild
Жыл бұрын
Hope it helps!
@fengzhang7156
11 ай бұрын
I just used it to cut a few pieces of plywood boards kzitem.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS works great. The blade that came with it isn't very good and I bought a much better bosch one which made much cleaner cuts. Blades were cheap, a few bucks.
@ToolsThatBuild
10 ай бұрын
Glad it’s working out. Ya the included blades are usually general purpose and not a premium blade.
@KMT15
Жыл бұрын
I have both and use them both
@woodwildtech803
Жыл бұрын
Nice
@sonidonova
2 жыл бұрын
Very good review, however, could you tell me which of the two saws is more powerful? Thanks in advance
@ToolsThatBuild
2 жыл бұрын
Hey thank you, same motor same specs. Neither is more powerful than the other.
@sonidonova
2 жыл бұрын
@@ToolsThatBuild I really appreciate your fast response which helps me a lot yo decide which one to buy. Best regards
@ChristopherClaudioSkierka
3 жыл бұрын
you forgot to mention scribing , probably easier so you can cut upside down . Have you tried with a 2 oh battery? how long do you think it would last before it cuts out of power?
@ToolsThatBuild
3 жыл бұрын
Yeah scribing or coping or anything with quick short direction changes and going upside down the barrel grip is the one to get. Runtime depends on what your cutting and how much force your putting behind the saw. I haven’t measured it just constantly running but those tests usually don’t reflect real world use anyway. I can say both saws run about the same amount of time and are a large improvement over the previous model.
@rytyky03
Жыл бұрын
i have the barrel grip i think it easy to control
@ToolsThatBuild
Жыл бұрын
Yeah I like mine, I have no issues controlling it but comparatively the on switch can be a pain. It’s a tighter cut than the barrel grip. They both have their upsides really.
@ChristopherClaudioSkierka
2 жыл бұрын
Hi, the black handle you push(2.50) I am finding it very stiff it will not go go forward at all, did you have the same issue at the start?
@ToolsThatBuild
2 жыл бұрын
Hey, no neither saw had that issue. I would check to make sure either your plate isn’t locked so the handle has been jammed back or there is debris blocking it from moving forward. Take a close look at it if everything seems to be clean and locked you may have a lemon and I would warranty it through Dewalt or exchange it for another one if it’s fairly new. I’m guessing the plate is jammed so the handle is stiff though. Wiggle the plate and blow it out with some air to see if that frees it up.
@garancompany2720
Ай бұрын
Greetings. Does this jigsaw have a sawdust blowing option?
@ToolsThatBuild
28 күн бұрын
Yes the saw dust uses air from the motor to clear or blow the sawdust off the cut line
@sncat
8 ай бұрын
Dewalt 335 best
@RobertLeBlancPhoto
Жыл бұрын
I can't hear you. :/
@ToolsThatBuild
Жыл бұрын
I think maybe it’s something on your end. Audio seems to be fine and no one else has said that.
@tmilholin7552
13 күн бұрын
worst Jig saw I have ever owned. Horribly engineered. couldn't cut a strait line if your life depended on it. I'll give anybody 2 million dollars if they can cut a straight line with it. I bought one from harbor freight for 29 that cuts better
@ToolsThatBuild
7 күн бұрын
Which saw are you talking about?
@tmilholin7552
7 күн бұрын
@@ToolsThatBuild DCS334B blade never stays on its track. very poor design. I looks like a nice tool but it isn't. I threw mine in the trash 2 weeks after buying it
Пікірлер: 84