Check out these hottt deals on power tools: amzn.to/3opwrZZ 🔥🔥🔥🔥 {This is our affiliate link. If you make a purchase, we will earn a small commission, at no extra cost to you.}
@sixdsix5028
3 жыл бұрын
Sure a drywall gun with belt attachment may cost a pretty penny for a specialized tool, but if you have to drywall even a few rooms, the speed and accuracy will likely pay for itself. Also, you could also sell the tool afterward making it cheaper than renting one and not have to worry about rushing a job.
@hammerandhome
3 жыл бұрын
very true, I love this gun and I can't remember the last time i used loose screws to board
@Harley365
3 жыл бұрын
Just ordered the whole kit with the cutout tool and the attachment. Be using it on my laundry room remodel next week. It will be a great tool in the adventure of remodeling my entire house. Great video thank you sir.
@hammerandhome
3 жыл бұрын
thanks for watching, you won't regret buying it, it's a great kit!
@experimentmodification3437
2 жыл бұрын
I bought the same screwdriver like this. Everything is ok, there is only one mistake. The switch for left and right should not be close to the finger, because when I press the switch, the direction lever also moves. That pi should be above the switch.
@armandogavare2853
2 жыл бұрын
you can lock the start button
@pawekowalik7826
4 жыл бұрын
I use same tool is great one of the best I own. Only one downside. With a longer screws 45mm and longer sometimes screws don't want to screw in straight.
@JamesofJesus
3 жыл бұрын
I might have said this earlier. If you up the battery to 3am, you can push the switch under trigger to be power always on. Good for when your finger want a break.. I got a rash from the triggers and then taped my finger. Without the loader the button really helps. Just don't miss! Lol. Also a FYI, works wonder on fence screwing and odd jobs. The impact is stupid strong, so make sure your straight on or your gonna burn a bit. Push it in without the loaded and twist to side on rev to take one's you want out.. So many tricks on commercial with this.. They don't always spend the extra on collated.
@bobseguin2195
11 ай бұрын
The grabber superdrive n7, fits dewalt, its lighter, less bulky, and a finer tip............fots better into tight areas....
@robhersey1796
3 жыл бұрын
The collated screws are more expensive, but I pin the sheets using these and finish up with regular screws to save a few bucks.
@hammerandhome
3 жыл бұрын
we do that sometimes as well, but for ceilings i only use the collated gun
@michaelc7283
4 жыл бұрын
Hi Brad, Yes, this is a great tool to have in your tool box. Can't wait to see which company will make a cordless cement board cutter. Thanks for the video
@soshi124
3 жыл бұрын
If you're doing a lot of hardie plank lap siding, I recommend a guillotine for dust free and perfectly clean cuts. the company Bullet Tools makes many different models that have different cutting capacities. Way easier than using shears and no more dust compared to any kind of saw or grinder
@46rambo49
3 жыл бұрын
good gun, good demo, we have several sites shutdown, cost of materials has made for shortages and 40 houses locally sit unfinished thanks Joe the union breaker
@jamesD104
2 жыл бұрын
Great review. I ordered the gun bare tool as was $70 off the $199 Canadian price..next up will be the add on attachment. Thank you so much!
@hammerandhome
2 жыл бұрын
You’re welcome, thanks for watching!
@waynerobinson7143
3 жыл бұрын
Love how all your tools look unused 😀👍 which mine looked the same
@hammerandhome
3 жыл бұрын
haha thanks, I try to keep them clean when i can, some are definitely not . thanks for watching!
@dannymeil3294
Жыл бұрын
Great technique for this tool
@calebgibbons1302
2 жыл бұрын
Great video, I have this gun(DCF620) with the attachment (DCF6202). I am a fencer and I bought collated decking screws for this but I am having a hard time getting them to feed properly. I bought the Simpson Quick Drive #8x1-5/8 T-25 collated decking screws. Is the a better type of screw strips that I can order? Otherwise both the screw gun and the DCF6202 feeding attachment are useless to me. Thank you for your time and consideration!
@kdsesc
2 жыл бұрын
Thanks for the review. What about the DCF6202 attachement. Just ordered one and will come only in march.
@mr.kenslifeshop4034
3 ай бұрын
I want one even though I rarely hand drywall I have a patch and texture company.
@hammerandhome
3 ай бұрын
They are awesome, you should see the new one
@mr.kenslifeshop4034
3 ай бұрын
@@hammerandhome is it the black adjustable torc screwgun?
@user-hn8wm5xd9f
3 жыл бұрын
YEAH RIGHT ITS SO MUCH HARDER EVERYONE THATS BEEN IN THIS GAME HAS BEEN LOOKING FOR A REAL EVEN MORE POWERFUL WAY TO USE SCREWS BUT THAT CAN GO THROUGH ANYTHING METAL WOOD AND USE ALL TYPES AS WILL.
@gplusgplus2286
2 жыл бұрын
Now, if they could make the adapter to work with the 887 impact...
@shawnermcgregor
2 жыл бұрын
I am going to try this boarding fences as an alternative to a nail gun using deck screws from senco. Should be able to go nearly as fast and make a far superior end product!
@hammerandhome
2 жыл бұрын
The only problem is you need a Robertson bit for it. Let me know if you can find one. I use my senco gun for fencing and it is a game changer.
@shawnermcgregor
2 жыл бұрын
@@hammerandhome been thinking about using the dewalt drywall gun instead with the collated attachment. Only does up to 2 inch screws but that's all I need for boarding fences. I heard it's better than senco. Thoughts?
@dcp6513
2 жыл бұрын
This is a brilliant tool. Can I use different size screws on this tool ?
@godsdisease
2 жыл бұрын
Great demonstration! Very thorough! Great video!
@maplecityfirearms4818
2 жыл бұрын
SOLD!
@cecillevisser9582
4 жыл бұрын
This is so darn cool! Brad, you rock buddy! 🤪
@hammerandhome
4 жыл бұрын
You rock!
@experimentmodification3437
2 жыл бұрын
I bought this machine. I am satisfied. Since I ordered this accessory with ammunition, I tried it and I am not satisfied.
@waynejohnson930
2 жыл бұрын
great review. thanks. can it be used on exterior handyboard siding?
@liverpoolliverpool6688
Жыл бұрын
That means i could use some electrical tape to hold the trigger down as we screw
@antongoncharov3043
3 жыл бұрын
I bought one , that is fantastic 👏 I'm very happy with this magazine. But I can't find these long thin bits nothing in home depot nothing in lowes , only Amazon saved my ass with bits but quality is lowest one 😄
@hammerandhome
3 жыл бұрын
It’s definitely a let down that they don’t sell these bits at stores. I have found the Same issue as you.
@antongoncharov3043
3 жыл бұрын
Thanks for responding. Oh God that is stupid to sell product but no parts for this product, well try Amazon I found it there if you want I can send you a link they're about 35 bucks for 10 pieces
@hammerandhome
3 жыл бұрын
@@antongoncharov3043 All good thanks, I have a few always in stock. cheers
@jordancypihot496
2 жыл бұрын
🇨🇦nice video man i was wondering if collated screws are all standard
@tilmanfrers7206
3 жыл бұрын
I totally love this. I have a bigger drywall project coming up, and im definitely buying a drywall gun. Half of my project needs 3" drywall screws though. Any ideas? It almost looks like one could modify the detents in that guide to fit 3".
@hammerandhome
3 жыл бұрын
you might want to go with a senco gun, they have models that go up to 3''
@zzubuzz
Жыл бұрын
That guy reminds me of the chainsaw guy in Scarface, he should start off video with "say hello to my little friend".
@hammerandhome
Жыл бұрын
lol perhaps i will just for you. cheers
@raymondjay1244
2 жыл бұрын
Can I use the DeWalt drywall gun with a Pamfast extension and auto feed head?
@-_.Nameyourcatdog._-
2 жыл бұрын
question to anyone who can answer. The Metabo can also do other collated screws can this one do like subfloor square head screws? I have all dewalt so i wanted to keep it all the same but i can get a factory refurbished Metabo for 75 drywall collated screw gun but corded or spend 200 and get this set. any advice would be greatly appreciated. I just bought my first home and redoing ALL of the drywall and adding on 350sq ft master bedroom and bathroom. Have a wonderful day
@cliffysummers6534
2 жыл бұрын
can you use any of the senco screws with it ? deck screws or subfloor ? thanks
@VictorMartinez-np9dc
3 жыл бұрын
Hi Brad, after watching your excellent video on the Dewalt DCF620 tool along with the DCF6201 extension, I am left with the following question. I see that in the video you mention that you use the SENCO continuous strip screws and that they are a bit expensive. Question, the plastic strips that are left empty, could they be reloaded with new screws to reuse them again? Thank you very much if you help me with this doubt.
@hammerandhome
3 жыл бұрын
Thanks! To answer your question, unfortunately no you can’t reload the strips. Once you use them it rips the plastic a bit. Thanks for watching
@esteslandscaping6947
Жыл бұрын
Is there an extension? 20”
@namelesswarrior4760
4 жыл бұрын
Obviously you're a Dewart Fanboy based on the vids that I have watched! Me too! But most of the tools are on my wished list atm!
@hammerandhome
4 жыл бұрын
thanks for watching! its hard to pick what to buy sometimes, sooo many cool tools out there
@kimkundid1484
3 жыл бұрын
It looks like a great tool. I have a question We just framed out my basement with metal studs, do they sell screws for that gun to be used to attach drywall to metal studs? Thanks
@drmechanicalchannel7641
3 жыл бұрын
Yes they do just make sure you buy the right screws
@junioraguil1775
Жыл бұрын
My Dewalt screwdriver keeps going at an angle and catching the top nose piece 🤦🏽
@hammerandhome
Жыл бұрын
check that you're screw size matches the setting on the side
@alexeisenhardt9299
Жыл бұрын
How much more are the screws tho?
@bryangrim6021
3 жыл бұрын
This thing looks so cool it actually makes me want to hang some drywall, and I hate working on drywall. 😆 lol That says a lot! Thanks for showing.
@hammerandhome
3 жыл бұрын
that's how I feel too😂, thanks for watching
@khaildaljaradi693
3 жыл бұрын
It’s Great .. can use it for MDF and Chipboard ?
@hammerandhome
3 жыл бұрын
MDF usually needs to be predrilled, i find that screwing into MDF without drilling first just mushes the material and you don't get a very good hold, I wouldn't recommend this gun for mdf or chipboard
@djexclusivee
Жыл бұрын
I wanted to use this for deck screws. Is there a particular name for the type of screws it needs? Aside from the length & width number. Like “ Senco ( or other brand) auto feed screws
@hammerandhome
Жыл бұрын
Unfortunately it only does Philips screws. And as far as I know know one makes treated Philips on a clip for this gun. I use the senco gun for my treated screws for fencing. For decks I use the camo system which is by far the best system for decking.
@berniemac8413
3 жыл бұрын
Great video!! Do you ever have any issues with the screws advancing? My attachment isn’t setting up the next screw.. I’m using the same gun, attachment, and screws..
@berniemac8413
3 жыл бұрын
Any ideas?
@franka5416
3 жыл бұрын
Thanks for the review. Your title states DCF620B but the data plate on the side of the screw gun at 0:28 just said DCF620. Is there a difference? Thanks
@hammerandhome
3 жыл бұрын
the letters on the end usually mean if they come with a battery or a some type of kit. but they never put the letter on the tool it self.
@Intoxacajun
2 жыл бұрын
Great Video! Could you use this gun to screw fence pickets up on a wooden fence? And metal siding and roofing?
@junenjip3711
2 жыл бұрын
That is also what I would like to know. Anyone experience anyone?
@hammerandhome
2 жыл бұрын
unfortunately I haven't found a Robertson bit for this tool, if they made one, than you would be able to use it for treated screws for fencing, I use a Sinco gun for fencing, dewalt makes another tool similar to this for metal roofing. i will leave you a couple links kzitem.info/news/bejne/1Zim34CFrH19h6g kzitem.info/news/bejne/pINvvYeriIaUo6A
@hammerandhome
2 жыл бұрын
unfortunately I haven't found a Robertson bit for this tool, if they made one, than you would be able to use it for treated screws for fencing, I use a Sinco gun for fencing, dewalt makes another tool similar to this for metal roofing. i will leave you a couple links kzitem.info/news/bejne/1Zim34CFrH19h6g kzitem.info/news/bejne/pINvvYeriIaUo6A
@manteminante
2 жыл бұрын
Does some one have experience using one of these on tile trade using it to screw durock or go board? if so what are your thoughts vs using a roofing nailer
@hammerandhome
2 жыл бұрын
the senco guns are great for using the coated screws for showers, i would never use a roofing nailer, the dewalt gun is great and you can use other brands of collated magazines on it, like senco or hilti. hope that helps a bit
@samuelg4986
3 жыл бұрын
Hi folks, which bits will match this drywall screwdriver attachment?
@hammerandhome
3 жыл бұрын
I use this one: amzn.to/3oIHUDt
@mdsnyc22
3 жыл бұрын
Thanks for this review. Does anyone know the name of the clamps he is using?
@hammerandhome
3 жыл бұрын
they are Festool clamps, I think I have some in my amazon shopping page. link under the vid
@BackRoadBound
3 жыл бұрын
Do they make screws that would work with this for attaching pressure treated fence pickets?
@hammerandhome
3 жыл бұрын
you can use the senco screws, the problem is I cant find the correct driver bit
@miked4024
4 жыл бұрын
How well does the attachment perform in tight corners?
@hammerandhome
4 жыл бұрын
its ok, i find if you have to screw at a bit of an angle it might leave the screw proud, i have found most auto guns do this, that's why i like the ability to pull the magazine off and finish with the driver.
@IntensityDan
4 жыл бұрын
Did you do push-ups before this? Because your arms look jacked! Can we see more biceps?
@georgedavall9449
3 жыл бұрын
Umm, creepy much? Wow
@rickcreations1320
3 жыл бұрын
Kinda gay
@gagikgyulumyan2442
3 жыл бұрын
is it posible to recicle the plastic magazine putting in them screws for later use?
@hammerandhome
3 жыл бұрын
nope, they are a one time use
@johnq6123
3 жыл бұрын
Is there much difference between using driver with setter bit vs actual screwgun?
@hammerandhome
3 жыл бұрын
this gun is by far the fastest of all the drywall options because of the screw strip
@marcussalinas6699
4 жыл бұрын
Where can I find the attachment they have the gun at lowes but can’t find attachment
@hammerandhome
4 жыл бұрын
check out amazon. they seem to have the best deal, i left a link in the description if you need, thanks for watching
@freddieraypagala2337
3 жыл бұрын
Does it have an automatic switch to turn on motor when you apply pressure to the screw or do you have to keep holding down the trigger and let motor just run constantly?
@hammerandhome
3 жыл бұрын
nope, its not like the festool. you do have to hold down the trigger to make it run
@innarlilleorg6919
3 жыл бұрын
No. You don't need to press triger all the time. The "lock" switch is under the triger!
@hammerandhome
3 жыл бұрын
@@innarlilleorg6919 that’s true. But that’s not what he is asking. There are models like the festool that done stay on running until you depress the front tip. Totally different operation.
@juliodolmus5720
4 жыл бұрын
You forgot 1 of the key features that gun has, the trigger lock on the gun right underneath the trigger itself. That makes using this that much easier
@hammerandhome
4 жыл бұрын
good catch. thanks for watching
@davedaniels8211
2 жыл бұрын
Could it be used with decking screws (anyone know if they even make them on a roll) ???
@hammerandhome
2 жыл бұрын
i have yet to find a Robertson bit for this unit, if they make a Robertson bit you could use sinco deck screws, not sure how the tool itself would hold up to the harder screwing.
@wellboyable
3 жыл бұрын
you reckon you could adapt this for screwing fences ?
@hammerandhome
3 жыл бұрын
you could if you can find the robertson bit for this, I'm not sure if they make one but i can't find it, I use my Senco cordless gun for fences, i will never go back. It's a major time saver.
@kevinrenderos146
3 жыл бұрын
ONE QUESTION A BIG! ONE !!! Is it possible to have something like this using 1/4 hex head screws ???? ( not the inside shape hex BUT the actual hexagon head screws for metal ???.
@kevinrenderos146
3 жыл бұрын
ALSO THANK YOU SO MUCH FOR THE COOL VIDEOS !
@hammerandhome
3 жыл бұрын
I know exactly what you mean, this gun is not what you need but Dewalt does make what you need. here is a link to the review I did on that gun. kzitem.info/news/bejne/1Zim34CFrH19h6g
@hammerandhome
3 жыл бұрын
your very welcome, and thanks for watching!
@michaelgaffney2328
3 жыл бұрын
Can this be used to screw in 1/2" OSB to a trust ceiling?
@hammerandhome
3 жыл бұрын
Michael Gaffney it definitely can. Make sure you use the correct screws and screw pattern.
@oldfart269
3 жыл бұрын
$18.00 for 1000 1 1/4" screws is not expensive at all!
@georgedavall9449
3 жыл бұрын
YEP
@robhersey1796
3 жыл бұрын
Not bad for sure but if you compare a box of 8000 for $43 it is a lot more, but time is money.
@callan3319
3 жыл бұрын
Hi can I attach a impact screw gun
@hammerandhome
3 жыл бұрын
Nope, it only works with the drywall gun.
@alonzomartii
2 жыл бұрын
Time is money. So you cut of your work by 30% of total time with this gun. Is definitely worth the second screws.
@hammerandhome
2 жыл бұрын
agreed, thanks for watching
@yolosolonorthwest6282
4 жыл бұрын
Can you use this in siding boards
@hammerandhome
4 жыл бұрын
you could use it on wood siding, but siding boards should be put on with the appropriate nails
@djexclusivee
3 жыл бұрын
Can you put deck screw cartridge on it?
@hammerandhome
3 жыл бұрын
I'm actually looking into that right now.
@jacobmindorff2309
2 жыл бұрын
@@hammerandhome Did you find a robertson bit that works?
@bigcartoonyIIV
2 жыл бұрын
will this fit with my impact driver?
@hammerandhome
2 жыл бұрын
i wish, but sadly no
@bigcartoonyIIV
2 жыл бұрын
@@hammerandhome i just bought this setup. I hope it helps. I have to rehang my ceilings alone from hurricane ida damage.
@bouncehouseofficial
4 жыл бұрын
what are those bench vise mechanism??
@hammerandhome
4 жыл бұрын
those are clamps by festool, amazing clamps!
@mjlockwo
4 жыл бұрын
Love the new set, Brad! 👌🤩
@user-pk9qh8vj1n
3 жыл бұрын
Sexy Sexy army SwiftKey
@roberthoward4170
3 жыл бұрын
Could I use 2-in deck screws with this gun
@BC94043
3 жыл бұрын
Hey brad! How well does this work with aluminum studs?
@hammerandhome
3 жыл бұрын
I actually haven't used it on aluminum studs yet, I have a job booked for Feb so i will give it a go. I know my synco works fine with aluminum so i'm sure the dewalt will be fine as well.
@rodjones6771
3 жыл бұрын
Good review 😷😁👍
@hammerandhome
3 жыл бұрын
Thanks! 👍
@citizen4ourt7
2 жыл бұрын
5:03 Sold! Lmfao good video
@hammerandhome
2 жыл бұрын
Thank you!
@konamanstudio2447
3 жыл бұрын
👍🏻🍻🍺🍕
@stoicllc2352
3 жыл бұрын
You festool table using’ son of a gun
@amoniman
4 жыл бұрын
They not handy,they cheap
@td5387
3 жыл бұрын
thing is a piece of shit every screw depth is different no consistancy what so ever
Пікірлер: 140