In this video, I teach you how to change the saw blade on the DeWalt DWE7485 table saw.
1. *Safety First:*
- Make sure the table saw is unplugged to avoid any accidental starts.
2. *Remove the Throat Plate:*
- Locate the screws holding the throat plate in place and remove them.
- Lift the throat plate off the saw and set it aside.
3. *Raise the Blade:*
- Use the blade height adjustment wheel to raise the blade to its maximum height.
4. *Remove the Blade Guard:*
- If your saw is equipped with a blade guard, remove it by loosening the mounting screws or levers.
5. *Loosen the Arbor Nut:*
- Use the wrench provided with your saw to hold the arbor in place.
- Use a second wrench to turn the arbor nut counterclockwise to loosen it.
- Remove the arbor nut and washer.
6. *Remove the Old Blade:*
- Carefully lift the old blade off the arbor and set it aside.
7. *Install the New Blade:*
- Place the new blade onto the arbor, making sure the teeth are pointing in the correct direction (towards the front of the saw).
- Replace the washer and arbor nut, tightening the nut securely with the wrenches.
8. *Reattach the Blade Guard:*
- If you removed the blade guard earlier, reattach it now, ensuring it is securely mounted.
9. *Lower the Blade:*
- Use the blade height adjustment wheel to lower the blade to its original position.
10. *Replace the Throat Plate:*
- Put the throat plate back in place and secure it with the screws you removed earlier.
11. *Check Everything:*
- Double-check that all components are securely fastened and that the blade is properly aligned.
12. *Plug in the Saw:*
- Plug the table saw back into the power source.
13. *Test the New Blade:*
- Turn on the saw and make a test cut to ensure everything is functioning correctly.
---
By following these steps, you'll be able to safely and effectively change the saw blade on your DeWalt DWE7485 table saw. Always remember to prioritize safety and double-check all adjustments before operating the saw.
#dewalt #tablesaw #sawblade
Негізгі бет Ғылым және технология DeWalt dwe7485 saw blade change tutorial how to
Пікірлер