Tools used: Magnetic Wrist Band: amzn.to/3V0h6Pk Table Saw: amzn.to/3L4Hcwh Drill: amzn.to/3P8BtWi Drill Socket Adapter Set: amzn.to/44134kz Ratcheting Wrenches: amzn.to/3H81un7 Socket Set: amzn.to/3N8sjM6 *DISCLAIMER: The above links are Amazon affiliate links. This costs you absolutely nothing, but pays me a small commission and helps me continue to create this FREE content.
@DannyNuerminger
7 ай бұрын
L
@inspiringbuilds
7 ай бұрын
@@DannyNuerminger Hi Danny, your full message didn’t come through. Let me know if you need anything. 👍
@sandysanders4199
Жыл бұрын
I should have watched this video BEFORE trying to put it together. The instructions were useless. 😊
@inspiringbuilds
Жыл бұрын
Sorry you had to go through that, but congrats on the new table saw. Here is a setup video I would recommend to watch after doing the assembly process. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@DavidRyanTaylor
6 ай бұрын
I JUST received my saw and stand today. You are so right. Wish I had seen this video before I struggled through the manual’s directions… 😂
@peadookie
5 ай бұрын
@@inspiringbuilds hey, may I ask - is education a mission for you? This and the setup video were absolutely amazing and convinced me to pull the trigger - I’m currently sitting in front of a brand new saw!
@inspiringbuilds
5 ай бұрын
@@peadookie Congrats on your new saw, I’m excited for you! My mission is to inspire others and give them the confidence and knowledge. 👍
@peadookie
5 ай бұрын
@@inspiringbuilds thanks and really appreciate your videos! I’ve been binging them!
@markarita3
Жыл бұрын
It doesn't get better than this folks! Thank you...yeah, the manual definitely needs improvement.
@inspiringbuilds
Жыл бұрын
I agree about the manual. Welcome to the channel. Thanks for watching and the feedback. 👍
@planethjd
11 ай бұрын
The last thing my brain was able to do after I received my brand new table saw was to read poorly written instructions. Too much excitement! This video is a life saver! Thanks for going slow, being clear and articulate and showing exactly what you're doing. Super helpful. Thanks again!
@inspiringbuilds
10 ай бұрын
You’re very welcome, I’m glad it helped, and thanks for the comment. I would recommend to watch the setup video after its assembled as there is usually at least one thing that needs adjusted to make your cuts more accurate. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@planethjd
10 ай бұрын
@inspiringbuilds Already gave it a watch! Wonderful follow up video! Thanks again.
@inspiringbuilds
10 ай бұрын
@@planethjd Awesome, congrats on the new saw. Along with the recommended upgrades I just released a jig that is helpful for these saws and will release a crosscut sled for super accurate cuts this week. 👍
@planethjd
10 ай бұрын
@@inspiringbuilds awesome! I can't wait to watch them. Thanks again!
@inspiringbuilds
10 ай бұрын
@@planethjd You're welcome and I just released a cross cut sled video to make your saw more useful, safer, and accurate. kzitem.info/news/bejne/qnqM1Wt4rqRmi3Y
@williambranham6249
3 ай бұрын
I bought this saw a few years ago but I didn't need it to be portable. I built a table for it. It's a great saw. I sold it because I found a full size Delta.saw. I started downsizing recently so I sold the Delta and purchased this saw along with the stand. I struggled today with assembly because the instructions are very poor. This is a multi billion dollar company. Maybe the assembly is on their website. I usually go to YT and voila here you are. Excellent video. New subscriber. I like the wrist band. Thank you.
@inspiringbuilds
3 ай бұрын
Congrats on your new saw and glad the video was helpful. Welcome to the channel, I look forward to having you as part of the family. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@DRUNKENxLAMAS
8 ай бұрын
Thanks for the help.man 😂 wouldn't have done it without you
@inspiringbuilds
8 ай бұрын
Thank you and congrats on the new saw, I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@greglbennett
16 күн бұрын
I just bought one of these today, unboxed the whole thing in the parking lot, because my car was too small for the box. Get it home, take all the parts out of the separate small boxes, pull the rip fence out from under the saw to assemble and the fence was bent. I called the store and I can't just bring the fence in and get a new one, I have to box it all back up and take the WHOLE SAW and assembly back and do it all over again..LOL...SO I came here to see how the wheels and the handles and the stand all fit back into that box. Thanks!
@inspiringbuilds
15 күн бұрын
@@greglbennett You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. One option is using my link to have it shipped to you for free. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@barrywong3503
4 ай бұрын
Excellent video, wish I had watched this first. Still made my setup easier watching it as I was trying to do it. My only complaint, not with video is Dewalt, my packaging was different(no styrofoam) and I'm missing wrenches and found out the gear rod was bent, so have to buy the wrenches and replace the gear rod.
@inspiringbuilds
4 ай бұрын
I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@mitchellbauer
3 ай бұрын
Thank you for the video. Started looking at the manual, was not informative enough. CAD drawings are way to cropped or zoomed in. Saved additional 15 minutes of cursing and fumbling around to see what needed to be attached where.
@inspiringbuilds
3 ай бұрын
You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@86mielcarek
5 ай бұрын
Twoje instrukcje są dużo lepsze niż fabryczne. Świetna robota.
@inspiringbuilds
5 ай бұрын
Thank you so much, have a great day!
@CalebsDadJCC
8 ай бұрын
Thank you for this video! I quickly regretted my purchase when I read the instructions. The first steps list installing the blade, which was already installed. The provided instructions are horrible. Wish #dewalt had instructions as clear and easy as your video. Thank you! I liked and subscribed!
@inspiringbuilds
8 ай бұрын
Thank you, happy to have you as part of the channel, and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@jeffMinnesota952
Жыл бұрын
6:20 you say to put the washer on the nut side, in my instructions it says to put the (1) washer on the bolt head side. You say you added an additional washer on the bolt head side, so that's good (hole in tube is wider), but I didn't feel there was enough length of the bolt.
@inspiringbuilds
Жыл бұрын
Yes, I personally recommend a washer on each side and there was plenty of room to tighten the bolt. I haven’t had any issues with the saw. 👍
@manskemd1
11 ай бұрын
I also put the bolt and washer through and didn’t use a washer on the nut. I couldn’t find extra, washers, seem fine.
@inspiringbuilds
11 ай бұрын
@@manskemd1 I agree you will be fine, enjoy your new saw and check out some of my jig videos. I just released this video that is a nice jig for our table saw and will make additional jig videos soon. 👍 Table Saw Taper Straight Line Jig kzitem.info/news/bejne/mYmZxaakn2V6bJg
@chucksharpe2665
8 күн бұрын
The instructions in the book is 4 horrible pictures. Your video saved me a lot of time. Kudos and thank you!
@inspiringbuilds
6 күн бұрын
@@chucksharpe2665 You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@diegosaltes
Ай бұрын
Excellent! Each step is clearly explained and demonstrated. The instructions are really useless so this video is a lifesaver! Thank you!
@inspiringbuilds
28 күн бұрын
@@diegosaltes You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@JamesMcDonald-pj6in
11 ай бұрын
Couldn’t imagine a clearer presentation. Made the whole process so smooth and quick. Thanks 👍👍
@inspiringbuilds
10 ай бұрын
You’re very welcome, I’m glad it helped, and thanks for the comment. I would recommend to watch the setup video after its assembled as there is usually at least one thing that needs adjusted to make your cuts more accurate. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@IanRae-g8m
5 ай бұрын
Great job on the instructions. The DeWalt manual was making my head hurt. I came in for a break, found your video at the first attempt and now I am looking forward to going out to the shop and getting this thing built!
@inspiringbuilds
5 ай бұрын
Thank you Ian. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@Micah6and8
7 ай бұрын
Thanks! This helped a lot. The dewalt instructions suck. I actually contacted them as I thought au was missing two bolts. Well, now I’ll have two spare once they are shipped to me.
@inspiringbuilds
7 ай бұрын
Thank you and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@lynnejoehubbard7325
5 ай бұрын
Okay... So I'm not the only one here having trouble with the instructions... I thought I was missing something.
@inspiringbuilds
5 ай бұрын
I'm glad the video helped and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@jeremysher
5 ай бұрын
Super helpful, thank you! I just set mine up and your video was spot on and very straightforward. 🙏🏼
@inspiringbuilds
5 ай бұрын
Thank you Jeremy. You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@OverOut
Жыл бұрын
Super helpful! thanks Dan. those manufacturer instruction booklets are always horrible to follow; especially the ones that only provide illustrations! you made it so easy to follow along. really nice table saw. love that magnetic wristband too! gotta get me one of those for sure. 👍🏼!
@inspiringbuilds
Жыл бұрын
Thank you! The wristband is super handy for sure. 👍
@PiggieSmall
6 ай бұрын
I'll say what everyone else said. This video was a billion percent more useful than the manual. That thing was shite.
@inspiringbuilds
6 ай бұрын
Thank you, awesome name with the PiggySmall, and I’m glad it helped! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@HLTrizzay
Ай бұрын
Thank you! I bought one of these second hand and in pieces with no manual but you helped me get it put back together!
@inspiringbuilds
26 күн бұрын
@@HLTrizzay You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@williamhedden8756
10 ай бұрын
Thank you so much for this video! The instructions that came with the stand were useless. I have subscribed to your channel.
@inspiringbuilds
10 ай бұрын
Thank you and Happy Thanksgiving. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@Normal1855
3 ай бұрын
I'm going to mount the table saw to a bench, and use the stand for my wood lathe. I don't use the lathe much, so it will make sense to have that stowed away.
@inspiringbuilds
3 ай бұрын
Makes sense, good plan. Consider making the bench mobile. Thanks for watching!
@bradleyprentice2359
Жыл бұрын
Thank you. I appreciate that you have taken the time make this video on dewalt table saw stand. The words are so small that I am not able to read very small print. With your help I was able to put mine together today Thank you once again 😊
@inspiringbuilds
Жыл бұрын
Hi Bradley, welcome to the channel. You’re very welcome, I appreciate the feedback and that’s awesome to hear! Once assembled it’s important to ensure it’s setup correctly. Check this video out for the next step along with recommended upgrades. How to Setup a DeWalt Table Saw: kzitem.info/news/bejne/xn17sqGKcp2QoIY
@lesliegilmore5033
5 ай бұрын
Thank you it made assembling easy, It did take longer than 10 minutes 😊😊
@inspiringbuilds
5 ай бұрын
You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@richfranken6114
Ай бұрын
Excellent video !
@inspiringbuilds
Ай бұрын
@@richfranken6114 Thank you, I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@jeffnowicki4059
29 күн бұрын
Great job and thank you for taking the time to produce and share this with us.
@inspiringbuilds
28 күн бұрын
Thank you I appreciate it. You’re very welcome, your comment makes it worth the time and effort producing the free content and I’m glad it was helpful.
@jeffMinnesota952
Жыл бұрын
Excellent. I have never seen a better done assembly video, and I used to work in that business. Outstanding. Thank you.
@inspiringbuilds
Жыл бұрын
Thank you, I really appreciate that as I put a lot of time and effort with a goal to release quality content to inspire and help others. Have a good evening!
@historydecoder
Жыл бұрын
Your video saved me a lot of time in setting up my saw! Thank you for the clear instructions!
@inspiringbuilds
Жыл бұрын
Great to hear and thank you! Congrats on your new saw. For a part 2 video I created a setup video before 1st use. kzitem.info/news/bejne/xn17sqGKcp2QoIY
@imkatiekateful
9 ай бұрын
I thought it was just me that was struggling with this thing. My mitre saw (also dewalt) was way easier.
@inspiringbuilds
9 ай бұрын
Definitely not you and Happy New Year!I appreciate you watching and the feedback. I put together a playlist (one includes the next step for setup after assembly that is important) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@jethrobodean3392
3 ай бұрын
actually made it enjoyable to put it together. Many thanx.
@inspiringbuilds
3 ай бұрын
Thank you and I’m glad it was enjoyable! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@nancymills3381
5 ай бұрын
Thank you for sharing it was very helpful to me!!
@inspiringbuilds
5 ай бұрын
Thank you Nancy. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@collinschiropractic
5 ай бұрын
Yes. Great video. Way easier than the manual. Thank you.
@inspiringbuilds
5 ай бұрын
You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@nataliemorrisonhomes
Жыл бұрын
That’s a slick saw - can’t wait to see what you build with it!
@inspiringbuilds
Жыл бұрын
Thank you! I already have a list and will be putting it to good use. 👍
@FixItFrench
Жыл бұрын
For Jobsite saws, I'd say this is definitely one of the best on the market. The rack and pinion fence is almost a must for me
@inspiringbuilds
Жыл бұрын
Agreed, one of the reasons I got it. Thanks for watching and commenting. If you have the same saw I’ll post a video soon on setting it up along with some upgrades. 👍
@FixItFrench
Жыл бұрын
@@inspiringbuilds Yessir and I currently own the Hercules which is basically a smaller replica of the dewalt. I’ve thought about upgrading to this one, but I decided to wait another year to get a sawstop
@inspiringbuilds
Жыл бұрын
@@FixItFrench You won’t be disappointed with the sawstop, lol they basically come preassembled ready to plug in out of the box too. If you don’t need it to be mobile and have the space it’s the way to go!
@nataliemorrison7173
Жыл бұрын
Nice tutorial! Thanks 😊
@inspiringbuilds
Жыл бұрын
Thank you so much!
@shoefanatic7076
10 ай бұрын
This is the the standard. You need some comp from dewalt.
@inspiringbuilds
10 ай бұрын
Thank you, I appreciate that!
@jessicavandervort1055
5 ай бұрын
Thank you for making this video! Your instructions were clear and easy to follow…unlike the package instructions.
@inspiringbuilds
5 ай бұрын
Thank you Jessica. You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@stancunningham7612
7 ай бұрын
As said by others, very easy to follow. Thanks.
@inspiringbuilds
7 ай бұрын
Thank you Stan, glad it helped! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@ozia1911
5 ай бұрын
Excellent instructions. Thanks
@inspiringbuilds
4 ай бұрын
You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@MattNaylor-c7q
Ай бұрын
Great instructions! Thank you!
@inspiringbuilds
Ай бұрын
@@MattNaylor-c7q You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@randyburns3842
Жыл бұрын
Very disappointing from Dewalt. I would prefer pre-assembled ready to use sometimes referred to as plug and play.
@inspiringbuilds
Жыл бұрын
I agree, I was expecting better as well. Even if it is pre-assembled all of them need setup as well as checked over time. For a setup video you will want to watch this one: How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@grantterry6500
Жыл бұрын
It’s so they can charge some lazy people 40 bucks to assemble it
@inspiringbuilds
Жыл бұрын
@@grantterry6500 Possibly, hopefully the video will help!
@davidduffin2176
Жыл бұрын
You used a Milwaukee drill to assemble a dewalt saw
@inspiringbuilds
Жыл бұрын
Yes sir, I’m a fan of both brands. Thanks for watching. 👍
@tawnyahinds8901
9 ай бұрын
Super helpful! Thank you for using
@inspiringbuilds
9 ай бұрын
Thank you and Merry Christmas. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@renezozaya4294
5 ай бұрын
Great video thank you for the help👍🏽
@inspiringbuilds
5 ай бұрын
Thank you Rene. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@edforChrist
6 ай бұрын
Wow! So helpful. Thank you.
@inspiringbuilds
6 ай бұрын
Thank you, glad it helped! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@CliftonMoore123456789
9 ай бұрын
I want one so bad😵💫. Great review!
@inspiringbuilds
9 ай бұрын
Thank you Clifton and welcome to the channel. It’s good to have goals as it gives you something to work hard for, you will get one. 👍
@AcrylicMemories
7 ай бұрын
do you have to use the metal rack or can you just use the table saw as a table top saw?
@inspiringbuilds
7 ай бұрын
You don’t have to use the stand, are you looking for a table saw or already have one?
@AcrylicMemories
7 ай бұрын
@ingbuilds Im looking to buy But want a 10 inch blade not an 8 inch so I can make a sled out of 3/4 inch ply. Just sucks that Dewalt stopped making their 10 inch without a stand, now I have to waste money and never use the stand Thanks for your reply
@michaelnevin7577
8 ай бұрын
Thank you. Perfect.
@inspiringbuilds
8 ай бұрын
Thank you Michael, I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@gordonthune668
3 ай бұрын
Thanks for the video!!
@inspiringbuilds
3 ай бұрын
You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@cosmo5254
9 ай бұрын
Great video and I'm thankful it's out there! The written instructions really are bad. Incidentally, my DWE7491RS arrived yesterday (01/03/2024) and I'm happy to report that they eliminated the styrofoam completely and replaced it with corrugated filler pieces. Very well packaged, and a very nice piece of equipment.
@inspiringbuilds
9 ай бұрын
Thank you and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@dwightpeccora2710
3 ай бұрын
Great work - where is the set up video?
@inspiringbuilds
3 ай бұрын
You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@thejayman587
8 ай бұрын
Thanks for the helpful video. I was shocked how bad the instructions were. Just picked up the new saw to replace my 13 year old DW744 that got damaged by movers.
@inspiringbuilds
8 ай бұрын
Thank you and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@pvd354
11 ай бұрын
Thanks for making this video. Before I found your channel, I was 30 minutes into the assembly and hadn't gotten to the wheels🤦🏿♂️. The instruction manual is horrible. I played your video and followed your instructions step by step. I also found your video on how to set it up, which was great as well. Thanks again!!
@inspiringbuilds
11 ай бұрын
You’re very welcome and congrats on your new saw! I’m happy to have you on the channel and appreciate the comment. I put out some recommendations for upgrades in the setup video, but also just released this video that is one of my favorite table saw jigs. Table Saw Taper Straight Line Jig: kzitem.info/news/bejne/mYmZxaakn2V6bJg
@mkemp307
8 ай бұрын
Outstanding step-by-step instructions! You're exactly right...those Dewalt set-up instructions were pitiful. So, thank you!
@inspiringbuilds
8 ай бұрын
Thank you and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@_SYDNA_
11 ай бұрын
Thaaanks! Could NOT figure out where / how to store the blade guard.
@inspiringbuilds
11 ай бұрын
You’re very welcome, I’m glad it helped, and thanks for the comment. I would recommend to watch the setup video after its assembled as there is usually at least one thing that needs adjusted to make your cuts more accurate. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@inspiringbuilds
11 ай бұрын
Also, if you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo
@_SYDNA_
11 ай бұрын
@@inspiringbuilds Yes, I did watch both vids in full before putting it together. Came back to see if you had mentioned storing the blade guard. ABSOLUTELY on the need for adjustments. It's also important to adjust in the sequence listed in the manual. For instance, I should have gotten the blade absolutely parallel with the miter track (which in my case lined the blade up with fence as well) before adjusting the bevel stops for blade angle. Similarly, you really need to flatten the yellow plate around the blade before squaring the blade's bevel set points. I REALLY liked your idea of using the adjustable builder's square to test the blade's parallel with the miter track. Getting it down to exactly the same amount of scrape on the blade seems as precise as you might get with a dial micrometer and certainly precise enough. A very accessible way of doing this. Thanks!
@inspiringbuilds
11 ай бұрын
@@_SYDNA_ Great feedback, thank you! I will have a new video out soon regarding helpful jigs for table saws starting with one of my favorites/most helpful in the shop. 👍
@jeffmykytiuk5642
8 ай бұрын
I would like to thank-you for being so considerate to make this video. It was great. The one thing I HATE more than anything is to read and decipher manufacturer's instructions on assembly. I typically skip what the manufacturer says and do my own thing. I always end up with an extra screw.....(LOL). I am more of a visual/auditory guy. I can't thank-you enough (and guys like you) who go to such lengths to make these videos for the general public. Thanks so much!
@inspiringbuilds
8 ай бұрын
Hi Jeff, you’re welcome and congrats on the new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@any14aVideo
Жыл бұрын
Hi Dan. Ecuador Ed here thanking you from Ecuador for the video. I just assembeled my saw 10 min. ago. Your video was spot on, simple to follow, and no hick ups. Way better than the instruction manual. I can't wait to see your set up video. I'll be looking for that one tomorrow. Great Job.
@inspiringbuilds
Жыл бұрын
Thank you for watching and the feedback, much appreciated! Here is the setup video and check out the bonus items as they make a world of difference. How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@glennchaffin8446
Жыл бұрын
My DWE7491RS arrived today, and your video was a huge help. Especially laying the saw on its top and aligning the Dewalt logos on the saw front and the stand. Took me about 30 minutes to put mine together, but I'm 71 years old so I take my sweet time with stuff like this. Thanks again. and yes I did hit the subscribe button.
@inspiringbuilds
Жыл бұрын
Congrats on the new saw and welcome to the channel, thank you for subscribing as well. Also, if you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo
@fredludwig2241
10 ай бұрын
Thank you very much! I agree that the directions would have taken me much longer to succeed with. Much appreciated!
@inspiringbuilds
10 ай бұрын
You’re very welcome, I’m glad it helped, and thanks for the comment. I would recommend to watch the setup video after its assembled as there is usually at least one thing that needs adjusted to make your cuts more accurate. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@m3mikec
Жыл бұрын
Awesome video, I was wondering where a couple of the accessories where stored. Looking forward to the setup video you mentioned. Cheers
@inspiringbuilds
Жыл бұрын
Thanks so much and welcome to the channel, I’m glad the video helped. Please let me know what you think of the setup video. I will be creating additional content soon for this table saw.
@MrVisde
7 ай бұрын
You are a LIFESAVER! The instructions that came with it were useless. This video was so well edited and easy to follow along. Thank you!!
@inspiringbuilds
7 ай бұрын
You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@abelhuet
Жыл бұрын
that was my dream saw for many years, and finaly I got it cuple of months ago. Geetings from Puerto Vallarta, México
@inspiringbuilds
Жыл бұрын
Congrats, that’s awesome you were able to finally get it. I will post a video soon on setting it up along with some upgrades. Thanks for watching and commenting. 👍
@tuboborikua
8 ай бұрын
Thank you so much. I was able to put it together thanks to your video. Now I am trying to find your set up video.
@inspiringbuilds
8 ай бұрын
Thank you and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@gavinmorrison7549
Жыл бұрын
Wow, very helpful. Instructions for assembling this was a mess. This helped a ton, thanks!
@inspiringbuilds
Жыл бұрын
Glad it helped, thanks for watching!
@MikeMarquart-z6r
9 ай бұрын
This was first video that came up when I realized how bad included brochure was. Great video. Just what you need
@inspiringbuilds
9 ай бұрын
Thank you and Merry Christmas. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@10colt01
7 ай бұрын
Helped a ton!
@inspiringbuilds
7 ай бұрын
Great to hear and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@SkyistheLimit2008-or2tl
Жыл бұрын
Thanks. Very helpful
@inspiringbuilds
Жыл бұрын
Thank you for watching and letting me know. After it’s assembled ensure it’s setup properly. I made a part 2 if needed to help with this: How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@SkyistheLimit2008-or2tl
Жыл бұрын
@@inspiringbuilds Yeah we watched that as well! Up and all assembled thanks to you. Nothing worse than trying to decipher directions. Hope to use the saw later this morning.
@GarvinLinks
Жыл бұрын
Friendly tip...The bottom levers for the stand can be released by pushing forward with your feet rather than bending down
@inspiringbuilds
Жыл бұрын
Thanks, you’re right it can be a bit easier that way and helps save on your body. 👍
@GarvinLinks
Жыл бұрын
Your vid was the only one that showed where the miter gauge is stored, Thank you so much couldn't find it at all.
@inspiringbuilds
Жыл бұрын
I’m glad it helped! Thank you for watching and I appreciate the comment. 👍 If you need to setup your saw or just want some upgrade ideas this is a good video to watch. How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@texastaco909
Жыл бұрын
Thank you. Opened up the instructions and couldn’t even make it out. Great job!!!
@inspiringbuilds
Жыл бұрын
I feel your pain. Thanks so much for the comment as it makes it worth the time and effort. 👍
@abrahamben-zeev9142
11 ай бұрын
Excellent tutorial.
@inspiringbuilds
11 ай бұрын
Thank you, much appreciated! Here is a setup video I would recommend to watch after doing the assembly process. kzitem.info/news/bejne/xn17sqGKcp2QoIYsi=CcY8OYxtzZnNIJFs
@inspiringbuilds
11 ай бұрын
Also, if you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo
@MrKen-wy5dk
6 ай бұрын
The introductory KZitem ad stopped me from watching your video.
@inspiringbuilds
6 ай бұрын
Hi Ken, unfortunately I don’t control where ads are placed, but you should be able to skip after a short amount of time and the video is well worth it if you’re trying to assemble your new saw. 👍
@whatchucallit2346
5 ай бұрын
I couldn’t have asked for a better step by step tutorial! Thanks
@inspiringbuilds
5 ай бұрын
Thank you Anthony. You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@DIYBuilt
Жыл бұрын
Great assembly video Dan, this saw is a great job site saw
@inspiringbuilds
Жыл бұрын
Thank you! I agree, they’ve made this same model for years and has been a go to table saw for me. 👍
@HvilleDon
Жыл бұрын
THANK YOU! I was almost ready to throw up my arms and sell the saw trying to read the book that was included! 😅
@inspiringbuilds
Жыл бұрын
The instruction manual is brutal. You’re welcome and glad it helped! Once you get it assembled don’t forget to watch my thorough set up video as well as recommended upgrades. Have a great weekend.
@inspiringbuilds
Жыл бұрын
Here is the setup video: How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@larrygarza9334
6 ай бұрын
Only thing you forgot was how to attach the kick back guard. But good explanation
@inspiringbuilds
6 ай бұрын
Thank you Larry, I appreciate you watching. For more details that you may be looking for I have a part two of this series: How to Setup a DeWalt Table Saw kzitem.info/news/bejne/xn17sqGKcp2QoIY
@GarvinLinks
Жыл бұрын
Great instruction video but don't like the disrespect in use the competition drill 🤣
@inspiringbuilds
Жыл бұрын
Lol Milwaukee makes a great product, but I do like DeWalt’s table saws and fence system.
@Julio82able
Жыл бұрын
Hello. Can i run a 10 inch table saw in an outlet in my garage?? I’m not a carpenter but i bought a table saw just to do some minor works at my home built a shoe cabinet for my son. So i was wondering if i can use the garage outlet to run a dewalt 10 inch table saw??? It’s 15 Amp 120 volts saw don’t know if that info is helpful. Also does a table saw use so much electricity and expect an expansive monthly bill? Please! Thank you.
@inspiringbuilds
Жыл бұрын
The table saw will only draw 15A when it is under heavy load. Under that condition, if there are other things on the same circuit, you can expect to trip a circuit breaker. It should work fine if you're just doing normal cutting. In your case minimal cutting and not often you should be good and with minimal usage it wouldn’t affect your monthly bill much at all as it’s not something like a old refrigerator that is continuously running.
@Julio82able
Жыл бұрын
@@inspiringbuilds Wow! Thank you very much. Definitely, cleared my doubts🙏🙏🙏🙏 Thanks again!
@inspiringbuilds
Жыл бұрын
@@Julio82able You’re welcome and welcome to the channel.
@dennisprince793
4 ай бұрын
WTH?? Why aren't you using a DeWalt driver?
@inspiringbuilds
4 ай бұрын
Thanks for watching Dennis. DeWalt and Milwaukee both makes good product and I have both, I just happen to have mostly Milwaukee batteries and tend to use their power tools the most. 👍
@Fluxxor01
Жыл бұрын
Great tutorial, thank you! I'm a pretty handy guy but those instructions really do lack clarity and this video made things a lot easier! Nice work!
@inspiringbuilds
Жыл бұрын
Thank you for the comment, it makes the time putting the video together worth it. Congrats on the new saw as well! Also, if you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo
@Fluxxor01
Жыл бұрын
@@inspiringbuilds as a matter of fact, I did order the precision miter gauge and digital angle finder based on your recommendations!
@inspiringbuilds
11 ай бұрын
Nice, I’ve used both quite a bit myself!
@elijacobson3896
Жыл бұрын
This was very helpful. Thank you so much.
@inspiringbuilds
Жыл бұрын
That’s great to hear! Don’t forget to check out the setup video. Congrats on your new saw. 👍
@easyed5758
8 күн бұрын
Maybe I missed it but the anti kick back was not mentioned.
@inspiringbuilds
6 күн бұрын
@@easyed5758 Thank you for watching, this was the assembly video. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@jimih7811
Жыл бұрын
You Sir, are the man!!! Thank you!!!
@inspiringbuilds
Жыл бұрын
Thank you, I appreciate the comment and you watching. If you need a setup video after you assembled your table saw I put a lot of time into putting this one together: kzitem.info/news/bejne/xn17sqGKcp2QoIY Congrats on your new saw!
@Ceodayone
11 күн бұрын
How do you put the saw blade in???
@inspiringbuilds
11 күн бұрын
@@Ceodayone I appreciate you watching. I put together a playlist (one is an important setup video after assembly for part 2 of this video covering your question) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@alterhype
2 ай бұрын
The worst instructions
@inspiringbuilds
2 ай бұрын
@@alterhype From DeWalt? I hope the video was helpful. I put together a playlist (one is an important setup video after assembly for part 2 of this video) that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
@systemrideo
8 ай бұрын
Dewalt please hire this man so he can lead the team of people that make your instruction manuals.
@inspiringbuilds
8 ай бұрын
Thank you!! I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzitem.info/door/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e
Пікірлер: 204