After replacing a Variable frequency drive on your Dexter Washer, you may be presented with the error DRIVE ERROR 1. This is completely normal, and the drive type must be set for the control to see the drive. The drive types vary based on the equipment type.
A-Series being upgraded to a C-series = DRIVE TABLE 1
C-Series board replacement = DRIVE TABLE 2
C-Series with newer MS300 drive = DRIVE TABLE 3
If you are seeing CURRENT or CLASSIC instead of the drive tables above, the firmware on the machine is out of date and should be updated to enable the proper drive tables.
Негізгі бет Dexter Washer Drive Error 1 After Replacing Variable Frequency Drive
Пікірлер