Quick question. I should have asked already. Where did you grab the 150 engine from? I'm thinking of swapping my 50 out with one
@Mikecheckmoto
3 жыл бұрын
I got mines on eBay for 315$ came with carb
@techjunkie3916
3 жыл бұрын
@@Mikecheckmoto I was just looking on there too, funny you said 319, I was looking at one of that amount exactly ,hah! Also..did you have to do any frame mods? to make the 150 fit? Mine seems to look like a short case. And if that's the case that's around $40 cheaper than a long case.
@Mikecheckmoto
3 жыл бұрын
No the Df50sst is definitely a long 50cc case trust me because you have 12inch rims short cases only use 10 inch rims but there are brackets you can buy from dong fang someone told me but I have no experience with them but other than that yes you’d have to modify frame
@djamazyn
2 жыл бұрын
I got mine from bdx power sports ..I got the 150cc with the cvt racing transmission and bigger piston heads for like 800 after tax
@techjunkie3916
2 жыл бұрын
@@djamazyn sweet deal!
@djamazyn
2 жыл бұрын
Hey I got the mock up off of how u made ur motor cage ....what I need to know is did you use washers or spacers on the bottom left side frame mount what are those red things
@Mikecheckmoto
2 жыл бұрын
Those are spacers I used
@felixmollmaderajr7094
2 жыл бұрын
Question Mike, 150cc LCase can still use the stock 12inch rim tire from old 50cc? will it still fit? or Need to ugrade the wheel to 13in.?
@ericneumann529
2 жыл бұрын
the brake shoes are bigger on 150cc motor, a 12 or 13 inch rim will work if drum will cover 125mm brake shoes
@jd.ons_Journey
3 жыл бұрын
Could you do a more detailed vid of how you made the engine mount with measurements.
@djamazyn
2 жыл бұрын
I'm tryna do the same thing with a Honda Grom clone n the frame is the same ...so my question is did you modify and stretch it out cause u wanted and would have wit out modifications....cause I'd don't think I have the tool or supplies to do the stretch
@Mikecheckmoto
2 жыл бұрын
No I necessarily didn’t want to it just happened that way with the measurements I took but if I could do it again I’d make it a lil better
@kennywheelus6857
Жыл бұрын
With swapping the engine, do you need a endorsement or no. I have the x-21 50cc dong fang SRT moped
@Demondisturba
2 жыл бұрын
With the long GY6 you have to stretch it? If I get a short case will it fit normal without having to stretch the bike?
@Mikecheckmoto
2 жыл бұрын
You don’t have to stretch it it came out that way I didn’t plan on it nor was I an expert
@jd.ons_Journey
3 жыл бұрын
Hey bro I have to same bike in black and just got the same engine for Christmas but what type of rear rim did you get cause my stock ones way to small.
@Mikecheckmoto
3 жыл бұрын
I had to get a 150 rim 13inch to be exact but they do sell 12 inch ones to but you need one for a 150cc motor
@JosesWorld_TV
4 жыл бұрын
Cops give any problem with it? I was thinking of slapping a 150cc on mines also but don't want them to take it away after or should I get 100 big bore kit?
@Mikecheckmoto
4 жыл бұрын
Well 1st you can’t tell it’s not a 50cc but no I haven’t had any issues but I don’t speed in front of them either lol as long as you do35 around them you’re good you can do a big bore but it definitely will make it less reliable
@K9Drew1
4 жыл бұрын
Just don’t go over the speed limit.
@JosesWorld_TV
4 жыл бұрын
Oh okay sounds good lol I would love to convert mines into a 150cc for sure
@DestinyCreatesEntertainment
2 жыл бұрын
Do you have a video or can point us to a video on actually unboxing it and a tutorial on how to put it together?
@budski1366
2 жыл бұрын
Dude amazing job man I'm swapping my engine also 50cc is just too much work breaking down so much man
@fnafgaming446
3 жыл бұрын
Love the R6 sticker
@christaguacta6675
Жыл бұрын
Could you post a parts list and where you got them
@Mikecheckmoto
Жыл бұрын
I did but it’s been so long links have expired
@johncabana7826
3 жыл бұрын
What’s your fastest speed I have a 169 cc and can’t get over 55 60 any tips?
@Mikecheckmoto
3 жыл бұрын
That all depends on your weight as well I’m 165 so that might make a difference also did you change any roller weights
@joespina3019
2 жыл бұрын
Yes you definitely need to work on your engine something is not right no offense towards you I’m just giving you heads up I have a scooter motor 100 cc. My top speed is 55 mph
@travisknox8045
6 ай бұрын
Hey are you still able to receive these messages?I have a couple questions.
@miguelzavalza6645
2 жыл бұрын
Hi do you have a build break down where I can order all these parts I want yo swap a 150 into mine same as your please thank you
@dj.patron77
4 жыл бұрын
Great job my brother!!!
@Shawn-g4y
10 ай бұрын
Hay bro im having trouble with the speed on my 50cc dong fang. I have done all the upgrades i can think of.
@RayLebeljr
9 ай бұрын
Starting from a bone stock 50cc dong fang how much if you could put a price on it did it cost to turn I to this
@ItzLahdi_Official
4 жыл бұрын
So I ordered the 200cc so my back end should be extended like yours right..just so I know I didn't get b.s.?
@Mikecheckmoto
4 жыл бұрын
Nah the 200cc one is not extended like mines if you look at some videos you can see it doesn’t when you swap the engine you have to extend it dong fang 200 comes with the actual brackets which makes it tucked in the body more
@ItzLahdi_Official
4 жыл бұрын
@@Mikecheckmoto Damn I thought 200cc was long b case so that means I can't go bigger in wheels?
@Mikecheckmoto
4 жыл бұрын
Well it already comes with 13inch rims that’s the biggest you can get usually and the displacement on the 200cc is like 168cx so it’s a lil faster than a stock 150cc
@ItzLahdi_Official
4 жыл бұрын
@@Mikecheckmoto wrd but your bike look dope af..they only had the white one in stock for me...that red hit hard asf especially with them led lights
@ItzLahdi_Official
4 жыл бұрын
@@Mikecheckmoto you should get them angel halo demon eyes head lights next.. them shtt on eBay for 30 something bucks ez install
@yasoukemany3430
2 жыл бұрын
Can I do this with the venom x21 50cc? Will it be similar to the process that you have done?
@Mikecheckmoto
2 жыл бұрын
No I don’t think it would work the same
@yasoukemany3430
2 жыл бұрын
@@Mikecheckmoto thanks
@galvanizingtechniques1111
Жыл бұрын
Hey Nice Job I own One Too Did You Ever Think to get A short Case 150cc..
@Mikecheckmoto
Жыл бұрын
I did but I wanted a bigger tire
@galvanizingtechniques1111
Жыл бұрын
Hey Mike Is The Short Case 12" Tire Only ? You inspired Me To Give The Upgrade A Shot!. I See There's No Bottom Mount For 150cc..
@alexklk2526
3 жыл бұрын
What’s your top speed I have a redstreak gy6 150cc n put it to my Df50sst my top speed is 95 no bigborekit just rollers
@Mikecheckmoto
3 жыл бұрын
65 is mine but I haven’t done anything to rollers at all everything is still stock
@charleymount582
3 жыл бұрын
That's got to be kph, not mph.
@legacyborn223
4 жыл бұрын
I love the way you think forward thinking and innovative.. thumbs up
@Mikecheckmoto
4 жыл бұрын
Appreciate that I really do thanks ✊🏾💯
@swiftcowboy
Жыл бұрын
Put a slide carb it will blow your mind trust me and do the final gear ⚙️
@matweenieves6100
Жыл бұрын
Do yk how to lower the front forks I been lookin everywhere for a video or a article but I got nun I got a df200
@chrismarusic4277
Жыл бұрын
Looks great bro..
@deedadon7142
2 жыл бұрын
Is there a 150cc engine with the same 3 prong stator wire as the 50cc?
@Mikecheckmoto
2 жыл бұрын
Not sure
@kennywheelus6857
Жыл бұрын
I do plan on with my upgrade 125cc carburetor an to change slider weights an variator,just haven't had time to install new carburetor yet,even without it,i can get up to 43 mph
@GardenOfEden93
3 жыл бұрын
Do you have to get a motorcycle license now since you put a 150cc on it
@Mikecheckmoto
3 жыл бұрын
No cuz it’s still registered as a 50cc just don’t speed on it
@GardenOfEden93
3 жыл бұрын
Nice would you be able to do something like this for me I noticed you lived in Florida amd trust me I’ll pay and go to you I have the same exact bike
@jamessaxon7607
Жыл бұрын
Whats the exact brand of the engine?
@Mikecheckmoto
Жыл бұрын
Tao Tao
@LuisGarcia-ot3sp
3 жыл бұрын
What part of Florida you from.? I am trying do something like that To Mine
@Mikecheckmoto
3 жыл бұрын
I’m in palm beach
@LuisGarcia-ot3sp
3 жыл бұрын
How much Would you charge me to intall bigger motor and a fatty tore on My 50cc moped
@Mikecheckmoto
3 жыл бұрын
Honestly man I do t have time to do that at the moment and I really do t feel comfortable doing for some I’m not a professional lol
@LuisGarcia-ot3sp
3 жыл бұрын
Oo ok i see. Thanks man.
@jayfoster1658
3 жыл бұрын
Are those actual R6 fairings or just stickers
@Mikecheckmoto
3 жыл бұрын
Just stickers🤣🤣
@jayfoster1658
3 жыл бұрын
Cuz im trying to find out if they would fit
@josepacheco2611
2 ай бұрын
How straight the bike
@erickcorona7839
3 жыл бұрын
Do u have any links to where u got any of these mounts
@Mikecheckmoto
3 жыл бұрын
I made the mounts out of scrap metal I had and welded it together
@yankee92scope
2 жыл бұрын
I'm trying to get the venom x21 do you recommend
@Mikecheckmoto
2 жыл бұрын
It depends on what you want lol
@yankee92scope
2 жыл бұрын
@@Mikecheckmoto just some to commute to work
@IosuamacaMhadaidh
4 жыл бұрын
Cool set up but no need to put Yamaha decals on it, just own it man! Nothing wrong with riding Chinese made stuff!
@Mikecheckmoto
4 жыл бұрын
Thanks appreciate it but who said there was something wrong with it being Chinese lol I just put the stickers on it cuz I like it no other reason 🤷🏾
@leonlovel59
2 жыл бұрын
How did u get the stator to plug in
@Mikecheckmoto
2 жыл бұрын
If the connection is different then cut off old connection from motor and put on new one
@leonlovel59
2 жыл бұрын
Yah but what do I do with the extra wire
@Mikecheckmoto
2 жыл бұрын
Honestly I don’t really remember I’d just try and match up the wires that are there and see if it start if there’s a an extra wire I’d just look up what it’s for
@leonlovel59
2 жыл бұрын
@@Mikecheckmoto did I ever get the 13” wheel on the front
@charlesdonawayiii3396
4 жыл бұрын
That’s so nice man, just watch out for the cops. They usually don’t know the difference, but that bike is gonna be fast asf
@Mikecheckmoto
4 жыл бұрын
Yea I know I definitely slow down when I see them or know areas they are at but I’m get my endorsement soon but thanks appreciate it definitely not done with it yet
@mrgemini100
Жыл бұрын
hey, any tips for a taotao racer 50,
@josiahbuyna7748
4 жыл бұрын
You should paint the fan on the stator cover red.
@scottday1875
4 жыл бұрын
Why paint it the can a paint cost more then a red fan would
@ElflakoC
2 жыл бұрын
I left my 50 cc with the switch on for 1 day but put the key off now I want to put it on it doesn’t go on it try’s to go on but not
@ElflakoC
2 жыл бұрын
Any suggestions will helpful thanks
@kenshi600
4 жыл бұрын
Damn you go hard
@younqpriinceancientgod1369
4 жыл бұрын
Hey bro I have a GY6 tmec engine but the wire harness is different but my bike is the same as yours
@younqpriinceancientgod1369
4 жыл бұрын
How did u get your harness to work for a GY6 150cc tmec from a 50cc wire harness ?
@scottday1875
4 жыл бұрын
I own the same bike I've had it for 2 years now you guys are doing this all wrong you do not have to do engine swaps for speed IAM a mechanic and this is investing to much money for a scooter that your trying to turn into a bike for the people that want more speed with out all that work hit me up
@UncleSpoons
4 жыл бұрын
How do you do it?
@scottday1875
4 жыл бұрын
@@UncleSpoons depends on your size to be honest any one 200 pounds or more shouldn't buy a 50cc no way listen all bike go by what size u are .but all I did was put a bbk and upgraded my tranny and gears put a oil cooling system on it with a handle bar nos kit I do 70 with out nos my 50cc already did 40 mph out the box why cause I'm 5"11 and only 140 pounds engine swaps aren't the way to go for 50cc cause u don't get a license plate u get a sticker watch tell all other moterist that u can only do 30/40 mph so all you need is basic upgrades to actually keep up with traffic first off I wouldn't buy the dongfang Df50 I would get the taotao racer50 it's a bigger bike a full size bike and still only 50cc
@scottday1875
4 жыл бұрын
@@UncleSpoons and yes handle bar nos kits are legal cause u really only use it when u can't pull hills or something of that nature
@UncleSpoons
4 жыл бұрын
Scott Day but me being a new rider I’m not sure what to look for could you point me in the right direction I have a DFsst 50cc and I’m barely hitting 40 and I weigh 160 so It’s okay for some places but then at other times I’m close to the side of the road because I can’t keep up what do you recommend?
@scottday1875
4 жыл бұрын
@@UncleSpoons just add you a big bore kit add a carburator upgrade change out spark plugs and coil wire that should put up at least 50 mph that's all I should need for any main road main roads usually don't let u go over 40 mph go to j and J's powersports and order a speed kit there 100 dollars
@seirasiera5182
3 жыл бұрын
Thats nice. I build a 250cc.
@Mikecheckmoto
3 жыл бұрын
Nice. 👍🏾
@tonypoke8733
3 жыл бұрын
Can u give a part's list
@diamondcube657
4 жыл бұрын
Not bad
@Mikecheckmoto
4 жыл бұрын
Appreciate it
@stany3965
4 жыл бұрын
Muito bom
@bethalpha
7 ай бұрын
stretched get mine in 4days
@Picassoinkz
2 жыл бұрын
Just get a motorcycle 😂
@Mikecheckmoto
2 жыл бұрын
Maybe you should just subscribe 🤣🤣🤣🤣 you’d see I have plenty
@felixmollmaderajr7094
2 жыл бұрын
Question Mike, 150cc LCase can still use the stock 12inch rim tire from old 50cc? will it still fit? or Need to ugrade the wheel to 13in.?
@Mikecheckmoto
2 жыл бұрын
Yea my you need a 150cc rim the old 12inch one did not work for the 150cc engine
@Squidwardsclarinet69
7 ай бұрын
If it has a shortcase 50 stock, a shortcase 150 may work with original wheels. I have a 150cc shortcase with 171cc big bore kit, it runs on 3.50-10 10 inch tires.
Пікірлер: 124