Ranked best blade of all time by catalytic converter thieves.
@avman2cl
Жыл бұрын
Doesn't work well in thin steel.
@DrMurdercock
Жыл бұрын
@@avman2cl idk, cat's are fairly thick, I think this would zap off a cat, idk if its the quickest blade but. Wait, why we helping would be thieves lol
@avman2cl
Жыл бұрын
@@DrMurdercock they always find a way.
@Steve.._.
Жыл бұрын
@@avman2cl except in Oregon! 😂 and some other states, just thought I’d comment that cause I found out Oregon passed a law that made it impossible to sell cats unless you are the owner or a wholesaler
@cant-get-right4814
Жыл бұрын
@@Steve.._. wow, so lets make murder illegal too. That solves the homicide problem.
@johngonzales3686
Жыл бұрын
I've been a contractor for almost four decades and have used a lot of different blades but Diablo is always my go-to blade they are awesome
@richiekaylor5004
Жыл бұрын
Spyder sells some products Diablo doesn’t in stores. (Always order online) but still Diablo is best of the best imo
@ralebkilliams766
Жыл бұрын
In my experience lennox blades seem to be the best.
@joshhuskins5363
Жыл бұрын
Diablo hands down everytime
@drmarsh4287
Жыл бұрын
Cheap and efficient.
@shawno8253
Жыл бұрын
Learned this from project farm lol
@carlo2737
Жыл бұрын
“Never trust a factory end.”
@fugdemaster
Жыл бұрын
I was thinking the same thing lol
@brantleycombs3088
Жыл бұрын
Lmaooo I’ve been seeing those video everywhere recently haha
@shanemoorehead1886
Жыл бұрын
@Brantley Combs HAHAHAHAHAH I KNOW RIGHT ISNT THAT CRAZY?? HAHAHA
@ExnihiloDCCX
Жыл бұрын
My first thought xD glad I’m not alone.
@brantleycombs3088
Жыл бұрын
@@shanemoorehead1886 I can’t tell if this is genuine or if that’s sarcasm
@022rty
Жыл бұрын
Bro, props on that ridiculously clean cut.
@joshbousche8669
Жыл бұрын
??? He cut the bottom right right twice
@jaygatsby3007
Жыл бұрын
@@joshbousche8669and that was all the rest was done fairly well compared to what anyone else could've done
@vorpalrobot
Жыл бұрын
Can't trust that factory edge
@FlyPVTarzan
Жыл бұрын
@@jaygatsby3007 anyone else sucks. Hard eggs. The blade keeps the dang thing straight. If you fuck up such a cut, you’re either fucked up, or a lazy POS.
@FlyPVTarzan
Жыл бұрын
@@joshbousche8669 nah he just didn’t cut through it the first time, leaving a small mitre groove. Not cut all the way, but maybe a half mm off that groove
@jazzsuis6066
Жыл бұрын
Crazy what can happen when you know how to use a sawzall! Ive been wanting to see a sawzall hack through an I beam, so thank you
@hollowheresy
Жыл бұрын
That’s insane. Mafia wished they had these to disassemble bodies back in the day. 😂
@jman0870
Жыл бұрын
It’s a carbide blade. There’s nothing insane about it. 🙄
@felixuchies4688
Жыл бұрын
@@jman0870 I think hes talking about the reciprocating saw, since bodies arent metal
@eancola6111
Жыл бұрын
Cement shoes into a lake worked fine
@THESLlCK
Жыл бұрын
@@felixuchies4688I think reciprocating electric saws have been around since before 1970
@matt59fire
Жыл бұрын
The fact ppl in this thread say reciprocating saw instead of Sawzall, hurts my soul.
@wolfluva24
Жыл бұрын
I like these videos where they actually test the product no fake shit no precuts just you showing if it says what it can do
@terrysanders7933
Жыл бұрын
The Bosch heavy duty metal blades are the best. I spent 40 bucks on a diamond cutting blade, got through 1 cut before it completely lost all its teeth, went and bought the 5 pack of the Bosch for like 25 bucks. Finished breaking down a trailer frame with just one of those blades, I still have them to this day and use them all the time. I still use the one that I used on the trailer
@phil2782
Жыл бұрын
Bosch owns Diablo.
@jeremyrisetter7541
Жыл бұрын
You remind me of @grandthumb 's 22LR man!
@hrtxspc
Жыл бұрын
Do you think they are better than Diablo blades?
@terrysanders7933
Жыл бұрын
Im not completely sure my town didn't have the Diablo blades. But they are pretty much the same company, one owns the other, the one I tried was a diamond tipped Lenox blade I believe, I would have to look at it I still have the old blade somewhere
@anond2015
Жыл бұрын
Bosch makes good stuff 👍
@TylerGraybeal
Жыл бұрын
Diablo blades are next level…been my go to ever since i heard about them
@TylerGraybeal
Жыл бұрын
@Ban this youtube damn that’s awesome…these blades were made to make the job easy. Pretty affordable too which makes it really worth the money (in my opinion)
@johnny4jr.521
Жыл бұрын
Nice cut, good technique. Those carbide blades are awesome.
@kylealden69
Жыл бұрын
Diablo is the shit! Sold them without complaint,used them for any kind of cutting flawless!
@mrbasic253_gaming8
Жыл бұрын
That's insane it's nice to see tools being made to last finally
@SimplySergMX_arts
10 ай бұрын
That blade is a freaking beast , it cut through that beam like butter!!
@matthewbutler8247
Жыл бұрын
Wow. Under 5 mins. That's why I love diablo blades
@Mistadittman
Жыл бұрын
Honestly as a contractor these carbide teeth blades are a life and time saver👌🏻
@calj01
Жыл бұрын
That’s a pretty durable blade. I will buy those from now on!
@timothylessing4774
Жыл бұрын
WOW Not bad Quick-ish Nice blade
@onecrazywheel
Жыл бұрын
Wow this would be a great commercial for them. Outstanding. I always pick up their blades at HD.
@GadgetAddict
Жыл бұрын
I was noth expecting that. Incredible but also scary.
@awholelotofnothing6456
Жыл бұрын
I've been using Diablo blades lately. I don't know how they do it, but I haven't had to replace one yet. Been on for 4 months or so. Weekly use at least.
@andrewepp6763
2 ай бұрын
That was surprisingly satisfying to watch
@04Corolla
8 ай бұрын
just got these at work, first blade cut through 2" brass shafts around 30 times, a few brass brackets, few hundred screws, and a 1 1/2 inch stainless shaft where it snapped in half, the second one did half a stainless shaft and still worked just as good, started cutting thin walled copper pipe 2 and 3 inch, cut like butter a few times then just stopped cutting, all the teeth were chipped. seems hit and miss but the stainless wasnt smart
@karmicselling4252
Жыл бұрын
These blades work very well. Diablo have released an AMPED range of metal cutting blades which are even better. Blades will last a lot longer if you use cutting oil and don't run the recip saw at full speed. A variable speed corded recip saw is the way to go. And yes, it is a H Beam rather than an I Beam. But that makes the demo even better because H Beams are usually stronger and harder to cut through.
@HTCvideos
Жыл бұрын
That’s crazy fast. That’s a heck of a lot of metal to chew through. What speed setting you running?
@teruelwaterworks2884
Жыл бұрын
Im a plumber i cut cast iron like butter with this blades another level of cutting blades great jobs done milwaukee 👍👍
@Gunbudder
Жыл бұрын
a lot of blades could probably do that. the insane thing about diablo blades is whatever black magic alloy they use holds an edge WAY longer. their blades tend to be thicker too. one of the few brands that lives up to the hype
@kelnap2294
Жыл бұрын
That's some solid engineering and blade, how many cuts can it make that quickly would be the question.
@BlackSheepGaming1
Жыл бұрын
I’m guessing about 3 we use those at the job and once we had to demo large 6 and 8inch black iron pipe that had to be 1/4 or1/2 thick and it did about 6 of them before it was time effective to switch blades 😂😁
@TheGreatWhiteHope-pb3qr
Жыл бұрын
My foreman only gets one cut out of any sawzall blade before it turns into a piece of bacon!
@andrew1898
Жыл бұрын
Yall are using the blades wrong. Use lube if you can. Keep it cool. You'll get more cuts before they shit the bed
@contraband1543
Жыл бұрын
@@TheGreatWhiteHope-pb3qr that's why he's the foreman and not out there working with you still. He cant work but he sure can talk. Definitely talked his way into foreman if he cant use a sawzall 😂
@newslavecity8311
Жыл бұрын
1/2 in pipe? sure bud.
@richardbanda4551
Жыл бұрын
Hell yea you can. Best blades you can get
@TheSphongleface
Жыл бұрын
4 seconds in and as expected you are using an ILLOGICAL amount of force on that metal piece
@killitgameing658
Жыл бұрын
Diablo is definitely my go-to blades for pretty much anything whether it be abrasive cutting wheels for my grinder or saw blades for my circular saw personally I would have wanted to use a longer blade for this test but pretty much the only thing I can fault you on is not using some cutting fluid just spraying that fucker with WD-40 while you're doing that would help a lot
@avman2cl
Жыл бұрын
Those carbide blades are unbeatable in thick steel, especially old galvanized pipe.
@joeybebop
Жыл бұрын
I use the same blade to cut dampers out of fireplaces. The cast is typically 1/4" thick and Diablo is my go to. 🤙
@Jasonpmc78-wm3xu
10 ай бұрын
I always used Diablo blades but these new milwaukee blades torch nitrous carbide are no joke and seem to me to cut faster and last just as many cuts or more than the Diablo blades. I watched some test and it backed it up, Indeed they do cut faster.
@PrinceAsmodeus
Жыл бұрын
Diablo makes great products
@ChildofYHVH
Жыл бұрын
We use them to cut up scaffolding that’s been exposed to chemicals and are rusted bad. They work Great!!!
@Youtubegroomskids
Жыл бұрын
the beam icon on all metal cutting blades has it. Diablo makes the best blades and has done so for decades. You could have over half the teeth missing and still cuts good.
@bulltough784
Жыл бұрын
What kind of jigsaw is that and what would it recommend?
@TheScandoman
Жыл бұрын
So, it's not really a surprise that cut: nice to know the 2:30 cutting time, but, what does the blade look like after?! ...or how long for that blade to cut again?!
@randypatterson8206
Жыл бұрын
I have cut through 1-3/4" B7 stud bolts with them, just slow your speed down so you don't overheat the blade. And use cutting oil to cool the metal.
@MrPhay-ex7rc
Жыл бұрын
Indeed, the skillsaw blades are also the best 👌🏻
@jordanwatkins51
Жыл бұрын
Without even watching the rest. Yes, yes it will especially on a Milwaukee ive done it numerous times
@terrygrant2300
Жыл бұрын
Not gonna lie that is impressive. Have been using Irwin 12mm wood augers to drill timber house posts for the past 18 years and have recently swapped to Diablo 12mm wood augers and so far quite happy with them.
@adamconnelly9923
Жыл бұрын
Wow......gotta love the diablos best in the buzinezz
@TheGoopGod
Жыл бұрын
Blades are great, it's just the sawzall that got me every time
@williamfralick3656
Жыл бұрын
Diablo blades are the best ive ever used
@Druid_Plow
Жыл бұрын
I got a 6 pack of those like 4 years ago and still have 2 unused. Only 1 has dulled out so far, the other 3 are still sharp
@tj4003
Жыл бұрын
Diablo blades are the best. I do crime scene clean up and we use Diablo blades for our circular saws and reciprocating saws
@Cod-Convict
4 ай бұрын
That’s actually really impressive and fast
@ricardorocha9304
29 күн бұрын
What is that machine that’s attached to the blade?
@diegomurillo2194
Жыл бұрын
It'll work better if you also lube the metal at the same time.
@lemmedie98
Жыл бұрын
Spit on it😂
@fatjeezussouthtexasoutdoor5244
Жыл бұрын
Lube??? Should I take the I-beam to dinner and drinks first...maybe some foreplay??....or should I just "accidentally" knock on her back door and see if she answers??? 🤣😂🤣😂
@JJUAREZ2409
11 ай бұрын
@fatjeezussouthtexasoutdoor5244 dumbest reply every you can tell this kid never worked a hard day in his life let alone in a metal fabrication place lube is also a term for wd-40 or sometype of tap liquid to keep the blade cool while cutting or bit while tapping but you'd never know that
@erickbianeck
Жыл бұрын
I had to cut a long exhaust box in 3 pieces, because it was thick steel for radiation shielding the box was 1” thick. It took 6 of those Diablo blades.
@dizzleslaunsen2372
Жыл бұрын
Then you used them wrong.
@fixerupperer
Жыл бұрын
Sounds like you should have used a torch.
@Tiareaaa
4 күн бұрын
I hope this isn’t a silly question. But by any chance would this be able to cut through a greenwald industry coin box? Have two machines that can’t be opened since the key is lost. Tried to drill into them and a drill bit broke off into the machine so now I’m thinking can I just saw into it?
@josefmechanic
Жыл бұрын
I always put some type of oil or lubricant on my work when I’m cutting it makes the blade last longer and makes it stay cool
@0The_Farlander0
Жыл бұрын
Two minutes and 30 seconds but i didn't see it slow down once in terms of pace. Pretty impressive
@sethstevens477
Жыл бұрын
Love them pretty solid too don’t bend as easy as some competitors
@davidthomas2870
Жыл бұрын
I work at a place that sells these. They're expensive, but I'd accept no substitute for heavy duty work. Milwaukee makes a good blade for lighter duty work tho. My customers haven't had good luck with the Dewalt or Irwin branded blades tho. Fine for light duty, not much else.
@TheCrystalGlow
Жыл бұрын
I have always bought them. They do better than most.
@fadetoblack24
Жыл бұрын
How many batteries did you burn thru to cut it
@joeb7168
Жыл бұрын
I’ve used many blades and think Diablo makes the best one.. they seem to last the longest too and even worn will still cut
@brandonmajcher3273
Жыл бұрын
I love these blades for exhaust work especially on stainless systems. A little wd-40 with them makes them last longer and cut better
@PaulRudd1941
Жыл бұрын
^^Darn straight! Lube those blades with cutting oil or something and theyre going to out last any angle grinder blade ever.
@ball_of_wires
Жыл бұрын
I'm impressed!
@pandorasflame7742
Жыл бұрын
I love Diablo blades for cutting conduits, but angle grinders are so much better in almost every aspect. Portabands are even better when they can be used.
@Mr900daemon
Жыл бұрын
I'm actually quite impressed
@jayray9186
Жыл бұрын
They are the best blades i've ever used for just about everything
@rickyspanish9625
Жыл бұрын
These blades really are an amazing innovation for the trades. I cut cast iron for plumbing with them all the time
@codyoverton447
Жыл бұрын
Use the one step down ones for rebar and everything else. Cuts rebar like butter
@richardcurtis2688
Жыл бұрын
I use those, they work great!
@JoshNormandy
Жыл бұрын
Love me some Diablo blades!!
@Motor-City_Ben-Diesel
Жыл бұрын
Saw saws are amazing
@coreylemieux6003
Жыл бұрын
Been using the milwakee multi tool blades alway felt they were lacking switch to the curved diablo blades and it wasnt even close been running the same blade all week doing demo etc
@theoneinthemiddle5553
Жыл бұрын
Free advertising for a company that actually deserves it. Sweet
@pokemonho8982
Жыл бұрын
what is this beam made of
@Joseph-zz3nu
Жыл бұрын
Those are the best blades. Especially on cast
@JamesKelly89
4 ай бұрын
That's usually when you bust out the oxyacetylene torch, but man, that Diablo blade did a fantastic job.
@Mikewheeler131
Жыл бұрын
Diablo doesn't F* around.. hands down best in the game
@mjbeusa80926
Жыл бұрын
Great as long as that's your only cut! Yay
@ghostoftheUchiha3250
Жыл бұрын
I am genuinely impressed! I use Diablo blades but I have never tried to cut anything that thick with it! Usually just nails, studs, PVC ect...
@swiftmatic
Жыл бұрын
It's not about the thickness. It's about hardness and strength. Most structural steel is A36 ( a relatively mild steel) or V50, which is significantly harder but still not as hard as a good knife.
@ghostoftheUchiha3250
Жыл бұрын
@@swiftmatic I'm actually a blacksmith and yeah the thickness does make a huge difference. when you're cutting into something incredibly thick like that you build up a lot of heat. that usually softens the blade and makes it lot easier to damage. but... hardness is definitely another determining Factor
@swiftmatic
Жыл бұрын
As a structural fabricator, I prefer to torch cut anything over 1/4 inch thick.
@ghostoftheUchiha3250
Жыл бұрын
@@swiftmatic that's definitely a better method for your trade. You're usually working on a bigger scale and a torch is a lot faster.
@ericswenson7504
Жыл бұрын
Very nice I'll have to pick some up, I've never put much thought into my sawza but my cheap blades are probably why I dislike using it lmao
@kennethriley3565
Жыл бұрын
Try Milwaukee Axe or demo blades and their Torch blades. They will change your mind about a Sawzall.
@Astrnauted
Жыл бұрын
Can we talk about how clean start and finish of your cut was metal blade or not?!
@andrewut7ya511
Жыл бұрын
Dude has some saw skills, good cut
@mrbailey4272
Жыл бұрын
There one awesome little blade. didn't really care about useing one figured there just like ever other blade out. I was so wrong plus they won't bend so be careful on the kick back 😊
@ryaaaaanwhat4072
Жыл бұрын
Crazy 🤯 always looked at it never thought someone might try it. Wow
@puprilla
Жыл бұрын
it depends on the amps of ur saw really. if u have something like 7 amp it's gunna burn up but if u got 10+ it will cut
@grantball6325
Жыл бұрын
I still would prefer my 7 inch grinder with a cutoff wheel. Tbh the baur 7 inch is pretty badass and you can get .045 disks for a 7 but not a 9. Sure 7 would fit on a 9 but the 7 is a lot more compact and less heavy. Just be careful not to bend those disks when cutting or they explode haha
@frankdelucey2137
Жыл бұрын
Can you do 2 cuts with the same blade on the I-Beam?
@vancemacd6315
Жыл бұрын
Nice to see it worked as advertised.
@nevinkuser9892
10 ай бұрын
Wow. That is damn impressive.
@Ancientcaptain
Жыл бұрын
Great blades you also get more than one cut per blade ,I recommend them if you haven't tried them
@matthewmccoy9680
Жыл бұрын
The best blades money can buy
@davidparker2196
Жыл бұрын
Im sure the 200 pound Milwaukee sawzaw helps... Picking that thing up made me decide to stick to DeWalt but im not cutting Ibeams lol
@3807shawn
Жыл бұрын
I've cut up like 5 or6 80's model suburbans with one that's cutting them in half frame and all diablos are very good
@rendrapranatajaya822
Ай бұрын
for cutting plate 65mm do you have referance. what I can used blade saw machine
@KillaCali707
Жыл бұрын
Diablo for life!
@ZachClynes
Жыл бұрын
Those are my favorite blades
@wesleypipesgaming19
Жыл бұрын
Could you do a video of "how many cuts through I beam before blade needs replacing"
@Daniel-ou4fb
Жыл бұрын
Their demolition blades are amazing
@MrRobreg
Жыл бұрын
This blades are the best.
@matthall3918
Жыл бұрын
That was damn nice clean cut
@garrettgreene9486
Жыл бұрын
They’re no joke, used the cutoff whew version and these and they worked very well for cutting up a old boiler that wouldn’t fit out the the room. Highly recommend
@martincurtis2257
Жыл бұрын
Used some diablos to cut out the engine crossmember on my ‘78 f250 handled it like butter but sent chunks of hot metal onto my hands good blades for sure
Пікірлер: 708