Good video, thanks. I've got a tri-band one that has burnt capacitors, its the 144/430/1200 MHz version, this will give me a start for the repair, thanks , Ian VK2LA. Not sure about the capacitors in the 23cm version. Mine was near a storm so the PCB's are a bit fried as well.
@TeamYankee2
4 ай бұрын
Just about to get one of these... I'll probably solder it..
@VK3IK
6 жыл бұрын
Good tips. Hate the sky sparks.
@educatedmanholecoverbyrich8890
5 жыл бұрын
Nothing wrong with sparks. Trouble is, they don't like rx sparks, (grins). G6YPK
@educatedmanholecoverbyrich8890
5 жыл бұрын
Is it possible to tell us the value of the capacitors in the stages and what voltages are used. I'l told they do not like a lot of power applied. I'd like to use 200W on 23cms, 150W on 70cms and 220W on 2m. I think that before I purchase, I need to buy in the caps to something rated more to my liking.
@vk3mh
5 жыл бұрын
The X7000 is rated to 2m 100w, 70cm 100w, 23cm 60w. Total combined power is only 100w. An upgrade to the capacitors could improve the rating however it may not be the only limitation.
@lakisfm1328
8 ай бұрын
Hello, anyone knows the values of the capacitors?. My middle element capacitor is 3C (i guess 3pF) , my bottom element capacitor is burned - not the one that is near the N-connector, the other which is on top of the bottom element. Thanks in advance.
@jimmycake7143
3 жыл бұрын
over wrap the joints with splicers tape after assembly/cleaning. see x700 vids here
@Hussein621
3 жыл бұрын
where ?
@theoneandonly7049
5 жыл бұрын
A have an faulty Diamond X7000 here on my desk. There is an small disk capacitor in the middle destroyed by water. I´m not able to read the capacitor value. Did anybody know the right value ? Thanks for help. DL6DBZ, Markus
@educatedmanholecoverbyrich8890
5 жыл бұрын
15pF is common for the 70cm part of the band. I suggest that you change for one rated to 4KV. They are only pennies. Also, use self amalgamating tape on all the joints, right over the top and back again.
@kennethschultz6465
3 жыл бұрын
I vould like that Too But all these BOZOES.. doesn`t get the IMPORTENS of Standard Capacitor Values So the """ retard level "" is high with some amaturs..
@jimmycake7143
3 жыл бұрын
clean with deoxit also before tightening
@ЛидияПлешкунова-я1я
2 ай бұрын
73 from UT5RQ !
@hassanadinito8409
3 жыл бұрын
How much this antenna x7000
@vk3mh
3 жыл бұрын
www.strictlyham.com.au/diamond-x-7000 information here too www.diamond-ant.co.jp/english/amateur/antenna/ante_2base/ante_base3.html
@jimmycake7143
3 жыл бұрын
maybe add a small lockwasher
@kennethschultz6465
3 жыл бұрын
Realy ... how old are You ??? 5yer (i can see you point but thats a NO NO NO NO NO) Maybe you can do that on 27.385.00MHz.. 11Meter But on 1296MHz ... PLEASE... centi meter/millimeter you realy realy realy Need to Think or use you brain atleast .. it is rather obvies 11Meter is 27MHz right VHF is 2 Meter UHF is CENTI METER /Millimeter WHAT DO YOU THINK A LOG WASHER WILL DO TO SWR??? adding aditionel to antenna MILLIMETER to CENTIMETER if you cant see wher iam going Do not Operate anything above 2 Meter it AIN`T FOR YOU and RG50 RG213 or any RG is Pointless On this antenna ECOFLEX 10/15 ANDREWS1/2" i got one but it is hevely modefied.. In a 6M straight Radome from a Prosessional Antenna .. I did not assembel it my self .. i Use 7/8" Hardline But i will disassambel it to get Walues Out of it if i need to Greetings From OZ-Land .. Denmark
@sunarjuwana4723
4 жыл бұрын
Bahgussss
@Panchiks16
3 жыл бұрын
На что способна антенна DIAMOND X7000 kzitem.info/news/bejne/r5qPsn2DfnpjqKA
Пікірлер: 20