Just found this while I'm working on my very first carb rebuild on my 95 Vulcan. Thanks a bunch for this clear and simple video!
@richardbartlett4075
2 жыл бұрын
Well done! These will always be a pain in the ass, but you did a spectacular job on this video. I'm 67 and it doesn't get any easier than your method! I have a repair shop and I never look forward to this job. LOL But you make it look like child's play, good job!
@dalemoody6534
10 ай бұрын
Awesome wasn't sure if I was doing it right because I couldn't find nothing on KZitem and then I run across your video I'm glad you put one out there
@28bikes53
3 жыл бұрын
Hi Bruce, these are the same carbs I have on my '98 Triumph Thunderbird Sport (x3) and your attention to detail is very much appreciated! I thought I was being thorough and careful in disassembly but discovered some very tiny washers and o-rings (the packings) but could not identify where they came from. Many fine videos on YT on these carbs... YOURS made clear where those tiny bits came from. Thank you! Nicely edited and helpful commentary. Great angles and lighting. Keep it up! Cheers, Matt
@oli23ism
2 жыл бұрын
6 years later in this was still very helpful, appreciate it👍
@alfajuj
2 жыл бұрын
Thanks for the excellent instructions. The Harley FSM just tells you to replace the whole air valve if the diaphragm is damaged.
@shamusokingsley2412
Жыл бұрын
Wow, man you made that look way too easy. I bet I spent almost an hour trying to unscrew it. Good grief. Why didn't I look this up before. Thank you very much sir!
@RogerDiotte
5 ай бұрын
I had a screw driver under my 750 Shadows 84 slider....there's a white plastic ring which I thought would slide down like a washer holding it all together lol....Then this!
@doug3805
11 ай бұрын
Thanks for the video, I was afraid I would destroy something and this helped a lot, worked like a charm!
@paulbull3765
3 жыл бұрын
Hi Bruce, appreciate your time and effort in putting this series together. Looking forward to seeing the rest of your videos. 🇦🇺👍🏻
@brianbriskey509
8 жыл бұрын
My 2 cent tip. I have Mikuni M2 carbs. I used floss to seat the diaphragms. The floss worked really well for this.
@garyconstant4234
4 жыл бұрын
Brian Briskey how does that work Brian
@adivarso8175
2 жыл бұрын
@@garyconstant4234 How you'd seat a windscreen/windshield in older vehicles with non bonded , I think that's the idea.
@oldrider816
Жыл бұрын
Perfect; just what I was looking for! Soapy water! Thanks Bruce!
@RogerDiotte
5 ай бұрын
My Hero lol! Thanks for the nitty gritty of how to do this!
@xXxHippieboyxXx
2 жыл бұрын
Thanks man, helped me with changing my diaphragms on a 89 kawasaki 454 ltd.
@RedNeckBiker109
9 жыл бұрын
Great video and good demonstration. Now I feel confident in replacing it when I need to.
@falkirk8413
Жыл бұрын
Good clear and to the point great information 👍
@johnsikiotis309
2 жыл бұрын
Thank you very much for teaching me how they go on much appreciated
@MixedCanadian
Жыл бұрын
Hey bruce, thanks for the thorough explanation. was looking for a video on this. have to replace that on my suzuki bandit s600 1997!
@daviesheerin6736
3 жыл бұрын
Exactly what I needed to know. Didn't consider soapy bubbles, would surely have torn everything to pieces. Thanks.
@strangeuniverse1199
2 жыл бұрын
I have a 1993 Honda CBR F2 sportbike that needed a diaphragm replacement on two carburetors. This video also shows how to replace the carburetor diaphragm on a '91- '94 Honda F2 motorcycle. The new diaphragm will not secure as well as the original so you can use some Seal All adhesive on top of the plastic ring to secure the two together.
@jronayne88
7 жыл бұрын
Bruce, thank you very much for saving me money. Ordered mine tonight.
@stwhite5135
4 жыл бұрын
Thank you. Thoought I had to buy the whole thing. Saved me a bundle.
@rickwilks
9 жыл бұрын
I think you may have saved this broke guy a bunch of money! Thanks for the vid!
@Richard-lionhearted
3 жыл бұрын
Thankyou for this instruction video ! Very kind and well done !
@tat2u65
4 жыл бұрын
file up the leading edge of the bottom of the slide before fitting the new diaphragm, helps with flow through the carby
@juandiaz5114
Жыл бұрын
Thank you great video. Hope will work on 2009 Royal Star Venture
@jamescampbell7823
2 жыл бұрын
Awesome, thanks buddy. I felt exactly like I think I would feel if I was trying to get a neoprene wetsuit on a really fat woman. By God we got it on her though.
@stevee9576
2 жыл бұрын
Thank you, this was very helpful
@robertlay3710
2 жыл бұрын
Thank You from THE WORLD OF TOMORROW
@ryderDoO
11 ай бұрын
Thank you
@Lloyd-mo
3 жыл бұрын
looks simple enough. everyone else seems to think it cant be done.
@reefkeeperspencer4046
4 жыл бұрын
That is awesome thanks for your time .
@souperdoo
8 жыл бұрын
Nicely done! I've added this to my channel.
@paulsavard8484
10 ай бұрын
dang. If only I'd seen this before I bought all new carb slides. ugh!
@bobberguy1
8 жыл бұрын
Thanks for sharing. H-D diaphragm and slide: $48.00.Diaphragm on Ebay: $10.00
@EMC13sR
6 жыл бұрын
bobberguy1 my slide is 150 ):
@morganmclaren5532
3 жыл бұрын
Wish I had seen your video first!!! Another one had me cut the rings. Now I’m screwed! Ughhhh I’m so mad!
@Real.Alpheus
3 жыл бұрын
I have a couple. I can send you one.
@INORBET
2 жыл бұрын
Fantastic video 👍🏼 trying to do them on my 2006 Kawasaki GPX250 (ninja)
thank you, I'm going to try this on the smaller 18mm diaphragms, you can get the diaphragms, but not the diaphragms and pistons, and the majority of 18mm assemblies, the piston diameter is too big for the keihin, plus the needle and vacuum holes are wrong
@shamseershmb4156
6 жыл бұрын
thanks.... please upload more helpful vedios Good Job.........
@reggy246
3 жыл бұрын
Does anyone know if the diaphragm is replaceable on a Suzuki Bandit 600 (1999) Mk1. The body of the slider is metal so i thought it must be possible. But when i asked at a local Suzuki dealer they said it is not possible to replace. only possible to purchase a new slider with the diaphragm attached.
@vivrevite7806
7 ай бұрын
Merci
@user-ee7wo7yc3v
3 жыл бұрын
Congratulations
@deathjunior7755
9 жыл бұрын
Have you replaced any of these on a ex250? the slide is black plastic on mine and I was hoping this would work since a new slide is really expensive. Mine has a slide tear the edge seal and so far windshield adhesive worked well but if I can replace it all together I will
@ThomasELeClair
2 ай бұрын
,,,,,,,,,,,,,,,,,,,,,,,,,,,,I was wondering if this was possible...............Thanks............................................................
@manonthompson758
2 жыл бұрын
THANKS!!
@Crazygaucho62
3 жыл бұрын
Great video thanks .... what bike are those carbs from.?
@jujulaf18
3 жыл бұрын
I know the KLR 650 uses them, don't know of any else... I think KLX too
@terrinbuchanan2598
4 жыл бұрын
Are these diaphragms universal?
@rapas66
6 жыл бұрын
Good job! :)
@YuriFurry
7 жыл бұрын
Thank you very very very much
@Gianmarco750
5 жыл бұрын
Grazie grazie grazie mi hai salvato
@Real.Alpheus
5 жыл бұрын
Gianmarco Prego.
@shamseershmb4156
6 жыл бұрын
what are advantages of Diafrom change...…????? please help me...
@EMC13sR
6 жыл бұрын
shamseer SHMB only change them if they are old and worn if yours are still good leave them
@aaronfidelisrecine
5 жыл бұрын
"If it isn't broken, don't fix it"
@Proonur
7 жыл бұрын
Where do you order these from? I'm in need of a set for a 1999 Kawasaki zx6e.
@sjwtard3709
7 жыл бұрын
got mine on ebay
@matlamb5648
7 жыл бұрын
Hey does anybody know if these will fit a 1986 gpz 600r
Пікірлер: 69