Top effort from the both of you and great to see you out of your workshop and doing some field work like a real tradie :P haha
@NearFarMedia
3 жыл бұрын
Gotta get our hands dirty every now and then. :D
@ananel-guaje1702
3 жыл бұрын
Hi, love your video. Btw do you have any idea what is the calibration tools needed for this machine?
@roedyhellyeah
3 жыл бұрын
love the video!
@Sutisna83
3 жыл бұрын
Good job repair machine myfreind 👍
@tsokolatedog
3 жыл бұрын
What brand clamshell press is that? And are both the same?
@markandro9276
5 ай бұрын
what is the main problem of die cut about was over voltage error ?
@fuuzug777
10 ай бұрын
Hi there! I am currently working on a die cut machine as well. It seems that the clutch is slow to engage the flywheel. It takes about 40 seconds to engage it. We have checked the mechanical systems and every thing seems to be work well. Would like your thoughts on this. Thanks in advance!
@NearFarMedia
9 ай бұрын
Check the clutch mechanism for broken engagement levers, also make sure the clutch packs are cleaned with degreaser so they don't slip. If the clutch packs are oily and/or worn and slipping and you tighten the adjustment too much, the engagement levers will break and you'll end up with even less clamping force to engage the clutch packs. If you have this exact machine, I have drawings and DXF files somewhere here to get replacement levers made.
@nrcha
3 жыл бұрын
What material did you CNC the disc out of? It also looks like a PET. Nice repair 👍
@NearFarMedia
3 жыл бұрын
The CNC'd disk was made from a standard kitchen cutting board, so almost certainly polyethylene. Hard wearing, chemical resistant and somewhat self lubricating so should work well in this application.
@nrcha
3 жыл бұрын
NFM But the 3d printed prototype was also PET? Not as thick, perhaps?
@mudassarali8681
2 жыл бұрын
How I change its side arm bush
@Elbert_Heather
3 жыл бұрын
What does it cut dies for?. I could not understand cut action with plywood template
@NearFarMedia
3 жыл бұрын
The plywood template is the die that is used to cut sheets of plastic into shapes, such as for folding into boxes for product packaging etc.
@SeanBZA
3 жыл бұрын
@@NearFarMedia Bigger ones with a flat plate are also around, used with a swing base that holds the material and a sacrificial backing board, and then the arm is swung under the big head with the cutting pattern in it, which then is pulled down by a connecting rod on a crankshaft to punch either through or to make score lines. Common to cut heavy rubber and leather to make shoes. Yes these machines have no brains, the operators must remember to use theirs, like a lot of old industrial machinery, and even a lot of brand new ones. 20 tons of pressure means you lose parts.
@NearFarMedia
3 жыл бұрын
There are two other die cutters besides the three like in the video in this factory (5 machines) too, they look like printing presses, and they diecut thinner plastic fully automatically. They are great for large amounts of thinner plastic but they don't have the oomph of these old flywheel-driven machines for the thicker stuff. Sometimes you just need brute force to get the job done. :)
@mudassarali8681
2 жыл бұрын
I am new in work shop you tell me or share with me it's assambling process I she'll be thank full to you
@vishnusudhakar819
3 жыл бұрын
Hi, We provide service and repairs of packaging machines in kerala
Пікірлер: 24