This really helped me I ordered some sandpaper to smoothen some 3D prints and now I know how to get it done with the different grist
@RusticDavid
10 ай бұрын
That’s great! Good luck with your project
@teecee9113
Жыл бұрын
Thank you so much. I am an absolute beginner at DIY. And this has helped me to understand about sanding wood. Cheers.
@RusticDavid
Жыл бұрын
Hi Teecee ,thanks for your feedback, good luck with your project, best wishes David
@teecee9113
Жыл бұрын
@@RusticDavid Thanks David. 🙂
@blakalbert
6 ай бұрын
I am 73 years old, using a square sander for first time. Thank you for explaining!
@RusticDavid
6 ай бұрын
Hey thats great Good luck with your project David
@leeb.5795
5 ай бұрын
Very helpful for choosing substrate for beardie's claws. Thanks for thoroughly explaining!
@RusticDavid
5 ай бұрын
Thanks for watching happy to hear that you enjoyed the video have a great weekend
@pkshan7888
3 жыл бұрын
To the point Explanation thanks a million.
@RusticDavid
3 жыл бұрын
Hi PK thanks for watching Happy Woodworking David
@terminatort2t800
3 жыл бұрын
That was the best 3 minutes, short and simple explanation, thank you :) Now I know how to choose sandpaper properly
@user-fy4xm7qy3b
3 ай бұрын
I'm about to renovate my dining table soon and getting some information - thanks a lot
@RusticDavid
3 ай бұрын
Hi thanks for your message Good luck with your dining table
@allieoop7024
5 жыл бұрын
Thanks so much for this! Really helpful for someone just getting started in furniture refurbishing!
@devanshkumar3868
3 жыл бұрын
This will help me in my school project in product design Thank you very much, sir
@RusticDavid
3 жыл бұрын
Hi Devansh Good luck with your school project Happy Woodworking David
@mickgatz214
3 жыл бұрын
Gee, after all these years, I never really understood about the 'Grit' definitions about sandpaper! Thanks for your informative video explaining this. :) Cheers!
@RusticDavid
3 жыл бұрын
Hey Mick glad you enjoyed the video Best Wishes David
@user-ov7su1lg3h
2 жыл бұрын
Thank you! Such a quick, easy to understand video. Very much appreciated...
@RusticDavid
2 жыл бұрын
Thanks Mark glad you liked it Happy Woodworking David
@asadosmani
Жыл бұрын
Excellent explanation. Thank you!
@RusticDavid
Жыл бұрын
Thanks for watching, Happy Woodworking David
@flytechbass1979
Жыл бұрын
Thanks, David, for the Info
@willanderson3044
2 жыл бұрын
I'm getting into woodwork so thank you for the informative video
@phyllisjrcrestorationdecordesi
2 жыл бұрын
Very very helpful. I never knew what the numbers meant and when to use which one.
@happytimes9937
5 жыл бұрын
Thank you for taking the time to show us the basics, was very helpful, please keep it up, can you show maybe the dovetail joint please
@RusticDavid
5 жыл бұрын
hi there Happy times nice to hear from you again dovetails ok, i will practice some first !!! i dont honestly cut them very often but they are a nice joint worth the practice have a great weekend Happy woodworking David
@happytimes9937
5 жыл бұрын
Rustic David thanks for a quick reply, so what is your most common form of joining wood, if it’s a joint whiz is your favourite
@RusticDavid
5 жыл бұрын
Happy Times hi well the most common joint that i use would be the mortise and tenon,its a table a chair a door a window a bed etc so thats the joint i make most then the simple edge joint ie no mechanical joint just two straight edges glued together to make wider panels then rebates for shelves these joints are common in my work for furniture for clients where they need to be made at a reasonable price, often the price dictates the construction method for cheap and cheerful furniture its plywood ,screws and a brad nail gun and glue personally im Happy to give the client what the want at a price that’s good for both of us ok im rambling on Have a great weekend David
@happytimes9937
5 жыл бұрын
Rustic David that helps a lot, thank you for your replies it really helps Java a great weekend
@Glasseyyy
2 жыл бұрын
Thank you! Very easy to understand. Needed this to sand a knife handle im seasoning
@nclare7
Жыл бұрын
Best information in this video.
@RusticDavid
Жыл бұрын
Glad you liked it best wishes David
@MasterKoala777
3 жыл бұрын
Short and sweet, and very clear. Thank you. 🙂
@dpdiaries2429
3 жыл бұрын
very helpful. It helped me to buy a sander machine with perfect grit
@ericaslittlewelshgarden
Жыл бұрын
Thanks for this video, it's helped a lot!
@RusticDavid
Жыл бұрын
Hi Erika,I’m glad you liked the video, thanks for watching, Im originally from Wales, are you in Wales?
@normansidey5258
3 жыл бұрын
Very useful information. Plain and simple, also very pleasant voice and style,Thank you very much.
@RusticDavid
3 жыл бұрын
Hi Norman im glad you liked it Happy Woodworking David
@garrettmeadows2273
Жыл бұрын
For a novice such as myself, I greatly appreciate this rudimentary info. I never learned these things growing up because my father simply didn't want to bothered teaching his sons things they should know.
@RusticDavid
Жыл бұрын
Hey Garrett, Im glad you liked the video, better late than never! Best wishes Happy Woodworking David
@theshameofthesun
Жыл бұрын
Thank You, David, very helpful
@RusticDavid
Жыл бұрын
You’re very welcome, thanks for watching .
@ImEli2215
5 ай бұрын
Thanks for the explanation
@RusticDavid
5 ай бұрын
My Pleasure good luck with your project
@techfinderlk1613
5 жыл бұрын
I am from India and thanks to you sir to give us useful information about sandpaper actually i am really confused about this You are doing well and keep going on sir best of luck👍
@RusticDavid
5 жыл бұрын
Hi storm thank you for your feedback sand paper basics start with your lowest number and work up to the highest Happy Woodworking David
@mrmwp74
4 жыл бұрын
Great video! Very informative. Thank you sir!
@MrScientifictutor
7 ай бұрын
Great video. Thanks
@RusticDavid
7 ай бұрын
Glad you liked it Happy Woodworking!
@torahulsingh
2 жыл бұрын
You've made it so easy 🙂
@lorenzodelfreo2615
3 жыл бұрын
Thank you so much, this was really helpful!
@tinytom3721
2 жыл бұрын
I’m about to polish metal and dam 🦫 this was so helpful thank you 👍
@RusticDavid
2 жыл бұрын
Hi Tom im very happy to hear that I could be of help Good luck with your project David
@frankayala3950
3 жыл бұрын
Thank you for explaining.
@lydiagarcia7495
4 жыл бұрын
Thank you! This is helpful! 😊
@RusticDavid
4 жыл бұрын
Glad it was helpful! best wishes David
@mooovclipz5609
3 жыл бұрын
nice video sir
@CptDavis
2 жыл бұрын
Thank you so much!
@RusticDavid
2 жыл бұрын
My pleasure Captain ! Thanks for watching!
@thecramptons
3 жыл бұрын
Perfect explanation!!
@RusticDavid
3 жыл бұрын
Glad you enjoyed it Best Wishes David
@GarryD
3 ай бұрын
It did help me. Thanks
@RusticDavid
2 ай бұрын
That’s good to hear! Thanks for commenting! Have a good weekend
@GarryD
2 ай бұрын
@@RusticDavidLikewise!
@stevejpm1
2 жыл бұрын
great lecture.
@dzeplous
3 жыл бұрын
thank you
@squeezekicks9491
3 жыл бұрын
Thanks
@TheMrBonzz
4 жыл бұрын
I'm watching this to make gunpla actually it's really helpful.
@RusticDavid
4 жыл бұрын
Hi Glad you like the video, whats gunpla? best wishes David
@TheMrBonzz
4 жыл бұрын
@@RusticDavid thanks for the pin, Gunpla is a set of robotics toys called Gundam that you have to assemble yourself which is where the fun is (kind of like Lego's but less blocks and more anime), think of it like making your own miniature ships or houses, but instead of woods it's plastics, and instead of ships and Houses it's robots with wings and guns and swords.
@RusticDavid
4 жыл бұрын
Some Random Weeb sounds amazing have fun David
@joshuakim4769
3 жыл бұрын
I dabble in woodworking which is why im watching this video. But I also build Gunpla haha. I end up just getting the cheap 40¢ nail sanding/polishing kits from my local cvs. They work to get a nice smooth finish. Currently finishing up a Keroro robo MKII. Not gundam exactly but still a Bandai kit looll. Got a whole bunch of HG and RG kits built using the nail polishing sets.
@solidifiedmustard4706
3 жыл бұрын
oddly satisfying
@dj31502
3 жыл бұрын
I like your Welcome Smile sir (Hi Guys😀)
@LyraLasala
3 жыл бұрын
very helpful! Thank you so much!
@elyyd9368
Ай бұрын
Very nice
@RusticDavid
Ай бұрын
Glad you liked it! Thank you for your comment , have a great week
@Stevencroasdale
4 жыл бұрын
Very helpful. Thanks
@RusticDavid
4 жыл бұрын
Hi Steven , you’re welcome, Thank you for your feedback Happy Woodworking David
@dhwaninaskar9517
4 жыл бұрын
So informative ! Thank you for sharing 🤗
@RusticDavid
4 жыл бұрын
Hi Dhwani ,Glad it was helpful! best wishes David
@ModifywithManoj
4 жыл бұрын
Hello sir, thanks for the information. Can u make a video on same topic like, sand papers are used in wet condition also. Y they are used and what is the advantage. Also if possible make a video on how to paint a metal part and plastic part, because some videos are having different sanding technique, so i want to learn the perfect procedure.
@RusticDavid
4 жыл бұрын
Hi Manoj Thank you for your feedback,wet sanding i would say is for non porous surfaces like painted or varnished wood,metals,plastics ,glass etc. “wet and dry “ sand paper is used which is made fo this purpose,starting in higher grits 600 through to the 1000’s the water washes away the dust and debris and lubricates the surface . Same rules apply start with low numbers and work your way up . I will make a note of your request but meanwhile watch some car body repair videos and furniture painting videos especially spray painted Good Luck to you my friend David
@ModifywithManoj
4 жыл бұрын
@@RusticDavid thank you for ur reply. I had seen such videos, but all have different technique for working. So i want to use one technique and work on it.
@zia429
4 жыл бұрын
Helpful information thanks
@RusticDavid
4 жыл бұрын
Hi Zia I’m glad it was helpful thanks for your feedback Happy Woodworking David
@monkeyg2420
Жыл бұрын
thank you :)
@RusticDavid
Жыл бұрын
You’re welcome Happy woodworking David
@faizmohammedsiddiqui4204
3 жыл бұрын
Thank you🌹🌹🌹🌹
@maschngon
4 жыл бұрын
Good video. Thanks
@RusticDavid
4 жыл бұрын
Hey Maschngon,Glad you like the video Happy Woodworking David
@cornedbeef19ch
2 жыл бұрын
1 grit is the best for electronic devices
@rylhltxr4710
3 жыл бұрын
Vincent Price is impressed.
@RusticDavid
3 жыл бұрын
Hi sorry I didn’t get the vincent price reference but thank you for your feedback Happy Woodworking David
@SlickTimes
2 жыл бұрын
0:03 Hi David
@RusticDavid
2 жыл бұрын
Hi Slick
@HHH21
3 жыл бұрын
Got it Thanks 😊
@AbulHussain-hh9rg
2 жыл бұрын
So do you always go from 120 -220 for finishing. Do I need 180 in between. Sanding a timber door. Please advise. Thank you.
@RusticDavid
2 жыл бұрын
Hi Abdul I find 80/120/220 good for my projects Certainly good for a door Best wishes David
@AbulHussain-hh9rg
2 жыл бұрын
@@RusticDavid yeah I did that David. Came out perfect. Well perfect for my standards anyway. Thanks for replying.
@Ashokkumar-ob5jv
5 жыл бұрын
Thanks a lot for this bn help v sir.
@JamesMurray1991
3 жыл бұрын
Have Steve Smith Cameron Bancroft and David Warner seen this
@justmejo9008
4 жыл бұрын
Thanks 🤗
@kenrock2
2 жыл бұрын
is it ok if i sand with 80 then straight to 220? or must i go from 60 to 80 to 120 then to 220 to get smoothness?
@RusticDavid
2 жыл бұрын
It’s best to go through consecutive grits as the next higher grit removes the scratches of the previous grit this not only gives smoothness but visual clarity you can see the beauty of the wood like polishing a lens best wishes David
@laurentiuflorin9946
3 жыл бұрын
Thank youu
@sakurauyou749
4 жыл бұрын
Does using 60 grits help remove rust? can I use 60 and 80 then jump to 1000 before painting?
@RusticDavid
4 жыл бұрын
Hi Exusiai How are you? Yes 60 grit will remove rust and so will all grits, for a smooth finish I recommend 60 ,80 ,120, 220. Good luck Happy Woodworking David
@sakurauyou749
4 жыл бұрын
@@RusticDavid to remove rust do i wet sand or dry sanding?
@RusticDavid
4 жыл бұрын
Exusiai バイブ hey what is the article?
@RusticDavid
4 жыл бұрын
Both work you need wet and dry sandpaper for wet sanding and it goes up to higher grits low numbers are dry to40 to 200 say
@The_Novu
Жыл бұрын
can you add cheese to sand paper grits
@abarusso
3 жыл бұрын
Hey David. I've got matte, soft plastic juggling balls that got smoothened over time with wear, drops and contact with rough surfaces. They got all glossy and I'd like to restore them to their former matte glory. Do you reckon I can do that with sandpaper? Perhaps with a very high grit? Thanks in advance!
@RusticDavid
3 жыл бұрын
Yes you are correct try the highest number you can 400/240 and just a light sanding all over you don’t want to remove the finish Good luck David
@abarusso
3 жыл бұрын
@@RusticDavid Thank you so much for your reply! :D
@abarusso
3 жыл бұрын
@@RusticDavid Worked wonders! Used a 220, 400, 600 and 1200 grit and they are back to their former look. Thank you.
@unicornice
4 жыл бұрын
Hi David, thank you very much! Could I use a very coarse sandpaper to make a piece of metal rougher?
@RusticDavid
4 жыл бұрын
Hi Unicornice the answer is yes your results will be effected by the hardness of the metal and the type of sand paper “emery cloth “ sand paper cloth is best but try what you have also a file will do a great job Good Luck David
@brightnuertey1451
Жыл бұрын
🤓🤝
@nunkap8874
3 жыл бұрын
So the higher the grit the less rough the sandpaper?
@RusticDavid
3 жыл бұрын
Hi Claudia, yes the higher numbers are finer Happy Woodworking David
@betterlatethannever4529
Жыл бұрын
But why not just start at a higher number? How much is actually being removed with each?
@RusticDavid
Жыл бұрын
Hi if you start at a higher number it will take more time to remove planer marks and scratches and wear out sand paper, the low numbers will remove material easily and fast, in short it saves time and sand paper Best wishes David
@betterlatethannever4529
Жыл бұрын
@@RusticDavidI guess that makes sense. Thanks.
@mahmoodali3776
3 жыл бұрын
Which number I fixed scratches discs
@RusticDavid
3 жыл бұрын
Hi Mahmood if you start sanding with 80 grit 120 will remove 80 scratches 220 will remove 120 scratches So go back to a lower grit number to remove scratches then go up to a higher grit number I hope this helps Best Wishes David
@toastysweetbrat
4 жыл бұрын
can I use a rough one, then straight away use a much smoother one like 2 x or 3 x more that of for example 60 grits then 100 grits?
@RusticDavid
4 жыл бұрын
Hi Fredric if you do it will take a longer time to remove the scratches from the 60 if you dont care about how it looks it will be smooth to touch but the scratches will show when you add a finish best wishes David
@toastysweetbrat
4 жыл бұрын
@@RusticDavid thanks David!
@bellabaxmann
Жыл бұрын
But what does it mean when people in videos use 600 grit? Or 1000 or even 2000! The other day a saw a 18000 grit :(
@RusticDavid
Жыл бұрын
Hi isabella, if someone is sanding wood that’s hard and highly figured ( that’s to say looks good) the higher up the grits you go the more polished the wood is and the more details of it you can see . Think of a pair of eye glasses if they are scratched with a low grit you cannot see well through them the higher grit makes them clear and you can see I don’t often use such hard highly figured woods and i sand 60,80,120 ,220 and stop there Hope that helps best wishes David
@TonicoGallery1
2 жыл бұрын
120-220 what happened to 180 grit
@RusticDavid
2 жыл бұрын
Hi David, you can use 180 grit and im sure it will be a superior finish but i am satisfied with the results without Best wishes David
@zico3239
11 ай бұрын
Griner disc
@RusticDavid
11 ай бұрын
Hi zico they call it both grinder and disc here in israel
@webdark8223
4 жыл бұрын
what about for metal
@RusticDavid
4 жыл бұрын
Hi Web the same rules apply regarding grits but I don’t know enough about metal work to tell you which type sandpaper to use good luck David
@VitohFelix
3 ай бұрын
One piece is much in Naira
@RusticDavid
3 ай бұрын
Hi Vitoh are you saying sandpaper costs a lot where you are? If so try making your own cabinet scraper check out this link kzitem.infod5Vn3B1915s?si=CIp5069-oyA6zZ6Y And search “ make your own card/cabinet scraper “ Good luck best wishes David
@happygoteddy4307
Жыл бұрын
This is embarrassing, how easy it should’ve been to sand it, lol. I’d either start at 80, then consider it done. Or I’d use a 180 and wonder why it wasn’t working. Oh well, now I know. 😊
@RusticDavid
Жыл бұрын
Hi like everything it’s easy when you know how!! Happy Woodworking David
@ansariaffiliates4653
4 жыл бұрын
1:00 it's one square inch...not CM
@RusticDavid
4 жыл бұрын
Hi Ansari thanks for your comment, it led me to Google where Wikipedia shows me a chart of " grit sizes" which are measured in micrometers so it appears we are both off track!! as the number seems to represent grit size not quantity in area ! Either way low numbers are coarse and high numbers fine ,i would love to hear any more information on the subject Happy Woodworking David
@louisbroddesson9220
3 жыл бұрын
joe
@Youtubeforme88
5 жыл бұрын
My fingerprint scanner on iphone didnt liked this video 😂
@RusticDavid
5 жыл бұрын
Vytautas V Hi what does your scanner like to watch? Maybe an iPhone channel would suit it better Enjoy the weekend David
@Youtubeforme88
5 жыл бұрын
Rustic David thank you 👍🏻 good video
@scootermom1791
Жыл бұрын
Why not just skip from 60 to 220? Why bother with the in-between steps?
@RusticDavid
Жыл бұрын
Hi if you work through the grits from the roughest to the finest it will save a lot of time and energy 80 grit easily removes the scratches left by 60 120 easily removes the scratches left by 80 if you skip these steps it will take a long time and a lot of 220 paper to remove the scratches left by 60 I hope this helps Happy Woodworking David
@scootermom1791
Жыл бұрын
@@RusticDavid Okay, that makes sense now. I appreciate the quick reply. 🙂
@BL4K_B4BIES
3 жыл бұрын
Thanks
@RusticDavid
3 жыл бұрын
Hi Rashawn , Thank you for watching Best Wishes David
Пікірлер: 158