Ever since I got acquainted with your good and professional page, your information has helped me to become more and more professional day by day, and I thank you and your colleagues.
@realpars
4 жыл бұрын
That's amazing to hear, Ali! Thanks a lot for being such a champion for RealPars! Feel free to contact us if you ever have any questions. Happy learning!
@alitaherkhani4404
4 жыл бұрын
@@realpars Thank you so much for your kindness in caring for your Follower
I love your videos you do a great job!!! Thanks for all your hard work!
@realpars
3 жыл бұрын
Thanks a million for your support, Freddie! We truly appreciate that.
@parimalpasarnikar2913
Жыл бұрын
@@realpars Thank you so much to spare time to like my comment 👍
@visalk9908
4 жыл бұрын
Really appreciate your efforts to bringing up these informative videos.
@realpars
4 жыл бұрын
Thanks for your support, Visal! Amazing to hear that.
@atirjan8320
4 жыл бұрын
Each video is so cool! Realpars is really good! ❤
@realpars
4 жыл бұрын
You are very welcome! Thanks for your support.
@atirjan8320
4 жыл бұрын
@@realpars most thankful But in fact, your all videos are really nice...❤❤
@koookibehbahani4955
4 жыл бұрын
Thank you thank you thank you For considering my suggestion, you are the best
@realpars
4 жыл бұрын
You are very welcome! Great to hear that you enjoy our content!
@boothhits6144
3 жыл бұрын
smart explaining with great graphism thank you so much
@realpars
3 жыл бұрын
Thanks for your support!
@glasslinesmadhes
2 жыл бұрын
Very useful to understand the regulator principal in compressed cylinders
@realpars
2 жыл бұрын
Glad it was helpful!
@me_tales1406
Жыл бұрын
excellent teaching
@realpars
Жыл бұрын
Glad you think so!
@filimniko
4 жыл бұрын
Thank you for the video! Happy New Year!
@realpars
4 жыл бұрын
Thanks a lot, Nikolai! The RealPars team wishes you a splendid new year as well.
@mnada72
4 жыл бұрын
I wished you have shown in the schematic at 6:00 how the piping connection is done to the secondary element (impulse lines)
@robertouser674
3 жыл бұрын
Thanks man.
@zainbsr5544
4 жыл бұрын
The best educational channel, but I think the pressure transducer that you explained in the introduction to the video is the flow transformation, isn't it?
@realpars
4 жыл бұрын
Differential pressure transmitters can be used for flow measurement, level measurement, and differential pressure measurement. The masnifold shown on the pressure transmitters shown in the opening segment are most often associated with flow measurement, but can be used in all three applications.
@antoniocaballero4207
11 ай бұрын
Great information, thanks!
@realpars
11 ай бұрын
Glad it was helpful! Happy learning
@asadabbas792
4 жыл бұрын
This is great do you have courses for fluid flow analysis; control valves, tanks, orifice, pumps etc?
@Fernando-fn2px
2 жыл бұрын
@realpars Fluid stuff would be great!
@manakamohammed2469
2 жыл бұрын
Love your channel always
@realpars
2 жыл бұрын
I appreciate that!
@unfilteredwithprakash6970
4 жыл бұрын
Detailing of manifold valve that connect at the bottom of the transmitter would be helpful.
@realpars
4 жыл бұрын
Thanks for sharing your feedback with us!
@ahmedb8395
4 жыл бұрын
perfect explanation, Great.
@realpars
4 жыл бұрын
Amazing to hear that, Ahmed! Thank you!
@qzorn4440
4 жыл бұрын
great video, passed this info on to some people learning flow. thanks. :)
The thing that always gets me on these transmitters is un screwing the housing to get to the wires. They are usually made of aluminum and gull & seize up.
@parimalpasarnikar2913
Жыл бұрын
Great videos. Explained in simple and professional manner. Keep up the good work 😇
@realpars
Жыл бұрын
Thanks for your support, Parimal! Happy learning
@suyashshinde7980
2 жыл бұрын
Very helpful video keep it up
@realpars
2 жыл бұрын
Glad it helped! Thanks for your support
@TradefusionbySam
Жыл бұрын
Which type flow transmitter is most reliable and gives most correct values & why? please make a video
@realpars
Жыл бұрын
Thanks for your topic suggestion, Samir! I will happily pass it on to our course library.
@naib4world325
4 жыл бұрын
Danke realpars®
@OlhaDotsenko-p1v
4 жыл бұрын
Thank You! So useful videos.
@realpars
4 жыл бұрын
Amazing to hear that!
@pranitadalvi2409
4 жыл бұрын
Supera explained... please do video on control valve and actuator types
@realpars
4 жыл бұрын
Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@nursyafiqahbintisyarmili9299
3 жыл бұрын
Very good
@Robsam28
2 ай бұрын
Thank you
@realpars
2 ай бұрын
You're welcome!
@oktaytekin4560
4 жыл бұрын
Thank you very much.lt wasbeen very good lesson.l will be watch again.(in İstanbul)
Please make videos about : gas header pressure " upstream " , gas pressure " down stream ". Well head pressure and temperature .. and Riser and test Riser Pressure
@realpars
3 жыл бұрын
Hi Mohamed! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@SOURAVDAS-lg8zx
4 жыл бұрын
Just awesome
@Guitarplayer724
3 жыл бұрын
Does the paid subscription to your site offer more in-depth instruction of the topics offered here? Thanks.
@realpars
3 жыл бұрын
Hi Ono, Thanks for your comment! It indeed does, our free videos on KZitem do not follow a specific start to finish structure. Whereas our course library is specifically designed in a way where it provides all the tools needed for beginners to evolve into an advanced level through our hands-on courses. Feel free to have a browse through our course library to see which topics we cover at the moment. bit.ly/30ZrxWq Additionally, by subscribing you will have access to our Technical Team - consisting of high ranking engineers with a lifetime of experience - who are here to help you out with any questions you might have along the way! I hope this answers your question sufficiently. If you have any other questions or would like any further assistance, feel free to reach back out.
@asadiqbal87
4 жыл бұрын
wonderfull information thank u real pars
@realpars
4 жыл бұрын
Thanks for your support!
@manikandanrasu4305
4 жыл бұрын
Very useful video thanks lot
@realpars
4 жыл бұрын
You are very welcome!
@shinodashinoda9059
4 жыл бұрын
Best Channel On KZitem ❤
@realpars
4 жыл бұрын
Thanks a lot!
@erluv51290
4 жыл бұрын
Really good knowledgeable video
@realpars
4 жыл бұрын
Amazing! Great to hear that, Luv.
@junaidbangash3969
4 жыл бұрын
great lecture
@realpars
4 жыл бұрын
Many thanks!
@ncsaravanan
2 жыл бұрын
Amazing videos 👏 👏 👏
@realpars
2 жыл бұрын
Glad you think so!
@prashantgupta7923
Жыл бұрын
What is the working principle of DP transmitter
@MBeracochea
4 жыл бұрын
I have being watching many videos, they are great explanations. Could you make a video explaining the difference of an SCADA and a control through an HMI please
@realpars
4 жыл бұрын
Hi Mariano! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
Hey Asad! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@livewithnature6331
4 жыл бұрын
can u kindly explain or share link, for the function of DPTransmitter connected to VFD of Pumps in Chilled Water Flow network (Closed Loop)
@realpars
4 жыл бұрын
Hi there, Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!
@alejandrogl6218
3 жыл бұрын
Great video thank you for uploading. Just one comment: around minute 3:14 when it says “the low increases” ... doesn’t that need disambiguating? When the flow’s speed increases, right? Because the flow’s mass rate stays constant.... Btw, if the goal was to measure dP across a strainer... wondering how it would work...
@realpars
3 жыл бұрын
There are many types of sensing elements that measure the fluid pressure upstream of the sensor (high side) and downstream of the element (low side). This differential pressure can be correlated to the flow, and the relationship is "flow is proportional the square root of the pressure differential". If I simply want to measure the pressure drop across a filter or strainer, for example, I just need to position the high-side sensing tap upstream of the filter housing or strainer and the low-side sensing tap downstream of the filter housing or strainer.
@kishornavin1278
4 жыл бұрын
Sir, can you please provide the different types of valves and purpose in industry
@realpars
4 жыл бұрын
Hey Kishor! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@yehtutnaung7164
4 жыл бұрын
Thanks again
@realpars
4 жыл бұрын
You are very welcome!
@hansajithchathuranga3307
2 жыл бұрын
i want to learn DP transmitter programing.can u educate me.because i'm doing some boiler job most of the time i face problems with a DP transmitters about the programing.
@realpars
2 жыл бұрын
Hi Hansajith, Thanks for your comment and feedback! I will happily pass this on to our course developers for possible future video courses.
@hansajithchathuranga3307
2 жыл бұрын
@@realpars thanks i appreciate that 🙏
@vundrukiran4494
Жыл бұрын
How the change in capacitence converted into electrical signal
@realpars
Жыл бұрын
Hi Vundru, Thanks for your comment, and great suggestion! I will happily go ahead and pass this on to our course developers for a possible future video course.
@AliVallil
4 жыл бұрын
mmH2O is also a commonly used unit.
@royfamily865
3 жыл бұрын
I Like This Videos
@milan6230
2 жыл бұрын
What If DP is showing negative value?
@realpars
2 жыл бұрын
There are many instances where a negative value is quite normal. A common range for a DP cell is -150 inH2O to +150 inH2O. This allows for situations where the transmitter is installed what is called a zero elevation situation (wet leg, transmitter positioned below URL).
@MM-vi9kh
4 жыл бұрын
Great before seeing the video 🤭❤️🌹
@alinaserzghair2761
3 жыл бұрын
Youuuuuuu Are Amazing that you so much
@realpars
3 жыл бұрын
Thank you so much, Ali!
@rajkumarshete3638
4 жыл бұрын
Good
@LouSaydus
4 жыл бұрын
I really need to get back to work. I have never worked on piping in my life and will never use this information.
@TheCicasica
Жыл бұрын
very nice video, but you are making a confusion between a DP transmitter and a DP Flow transmitter...and almost completely ignore DP Level transmitters :) appreciate the time and work though :)
Sir I'm learning lots of knowledge from u when u have 1000 subscribers I'm one of them 😘😘
@realpars
3 жыл бұрын
That's great! Thanks for your support, Amar
@mohammadash7072
4 жыл бұрын
Would you please clarify what did you mean by " .....and one of several ways to convert the pressure applied onto the diaphragms into an electrical signal " ?
@realpars
4 жыл бұрын
The process pressure can be converted into an electrical signal through a detected change in capacitance, by sensing the pressure using compression of a special ceramic substrate, or by deflection of a piezoelectric bridge. These are all physical methods of converting pressure forces into electrical signals.
@rboss9581
4 жыл бұрын
Nice video!! Can you guys explain to me the formula how to calibrate a pressure transmitter and set up the value LRV and URV on a hart calibrator for a close vessel and a open vessel thanks.
@realpars
4 жыл бұрын
Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@punnamakhil6718
3 жыл бұрын
Any measuring instrument for mean effective pressure sir
@realpars
3 жыл бұрын
If you are referring to mean effective pressure, which is the measure of an engine’s capacity to do work independent of engine displacement, then a very small pressure transducer is used that measures the cylinder pressure. Mean effective pressure determined by calculation over the entire cycle of the engine (compression, ignition, exhaust). These are typically small electromagnetic gauge pressure sensors. A good example can be found at: new.abb.com/products/measurement-products/diesel-engine-monitoring/pressure-transducer-pfpl203
@EkcommanMan-hc4vd
4 жыл бұрын
Thank you so much
@srinivasarohithnulu4566
4 жыл бұрын
Thanks for upload.please do more videos on field instruments please please
@realpars
4 жыл бұрын
Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@andrefrederickenmogne8899
3 жыл бұрын
Very intresting
@wilsonguedes4669
4 жыл бұрын
Thank you master!
@realpars
4 жыл бұрын
You are very welcome, Wilson!
@akashdutta5366
3 жыл бұрын
Always searching for this type of informative channel...it's great ❤️
Пікірлер: 145