This is the shortcut method for how to remove the differential from a S-series or C-series manual transmission 5-speed or 6-speed. Can be applied for S54, C50, C56, C60, C66, et cetera. The procedure is to split the bell housing from the middle case and disconnect the two internal bolts holding the reverse arm, allowing the bell housing to separate completely. The differential can then be removed. It is a shortcut method. It is not the method suggested by Toyota in the official repair manuals for these transmissions. Use at your own risk. The author of this video is not responsible for any damage to your transmission. For purpose of demonstration this is done on an old worthless transmission. With a serviceable transmission additional precautions must be taken to prevent damage to the transmission case and internals. Also applies for 6th Gen Celica transmissions, 7th gen Celica, MR-S/MR2 Spyder, Lotus Elise and Exige transmissions.
- Күн бұрын
Differential Removal - Toyota MR2 Manual Transmission - Shortcut Method
- Рет қаралды 17,727
Пікірлер: 60