Instead of a paper plate use a small canvas and you can make a matching painting to go with your tumbler!
@angiesartkraftykreations3677
2 жыл бұрын
Super cute 🥰. I’ve been wanting to try this, lord knows I have enough paints, lol! Thanks for sharing and have a wonderful day 🦋🤗
@mscraftygirl42
2 жыл бұрын
Absolutely beautiful!
@MissKissKreations
2 жыл бұрын
I do have tumblers from 4 years ago that I didn't sand. They have not come apart and the epoxy is still in tact! But, I do sand, just adds a couple extra seconds on the process and stops the non stop debating with my followers lol
@mscraftygirl42
2 жыл бұрын
@@MissKissKreations I'm just starting out making tumblers, but I did sand the first two that I have made.
@judith7
2 жыл бұрын
Omg this tumbler it’s so beautiful ❤️❤️
@pattibleau622
2 жыл бұрын
It’s beautiful. Love the colors!!!
@loismaddux4800
2 жыл бұрын
Love this tumbler. So very pretty!!
@kristinamoore8484
2 жыл бұрын
Absolutely beautiful
@tlynn1963
2 жыл бұрын
Love these colors!
@minicaestilette3010
2 жыл бұрын
Love the colors Beautiful
@MissKissKreations
2 жыл бұрын
Thank you!
@marylett2224
2 жыл бұрын
This is gorgeous 😍
@rosalindasanchez1923
2 жыл бұрын
It’s beautiful
@Jackieofallthingscrafty
2 жыл бұрын
Love your videos and how you make them easy to follow and understand. New sub!! Thanks!!
@MissKissKreations
2 жыл бұрын
Thank you!!!
@bryanwiley7345
2 жыл бұрын
Cool technique!!!
@tanekagriffin4611
2 жыл бұрын
Cute !!
@chicacasada43
2 жыл бұрын
I love it 😍😍
@dinagalvan4496
2 жыл бұрын
My cup came out gorgeous BUT it’s still slightly sticky Its been 24 hours will it change? Ty btw great video :)
@poohltd
2 жыл бұрын
Niceeeeeeee
@captainnofun6366
2 жыл бұрын
Thanks for the video. The tumblers look great. How much paint approximately did you use on one tumbler? Also would it be useful to do a thin skim coat on the cup first to break to surface tension so it flows evenly? Or does acrylic paint not behave that way?
@MissKissKreations
2 жыл бұрын
Yes you can do that. And honesty, I didn’t measure the paint exactly. If I were to guess, maybe 100ml. (One silicon measuring cup )
@NinaCristina12a
2 жыл бұрын
Leela, I have a question, when you say you spoon in on I turner for four hours and then turn the tumbler off to cure the rest of the way, do you leave it on the turner, or do you stand it up? Also, is it bad to keep a tumbler turning? Sorry, that’s 3 questions.
@MissKissKreations
2 жыл бұрын
You can leave it air curing on your tumbler turner or you can move to a drying rack. Whichever works for you. And it’s okay to leave them turning longer. I’ve forgotten about some tumblers before and left them turning for 24 hours. 🤣 it won’t ruin them.
@tarascott6191
2 жыл бұрын
What if your paint cracks as it's drying? And how do I make it not do this in the future?
@03zoey
Жыл бұрын
only thing I can think of is resin so umm no
@lujjinanj1227
Жыл бұрын
Hey can only use clear spray and mod glue
@janacamp7024
2 жыл бұрын
These colors are great. Question....have you ever did a dirty pour over a glittered epoxied base? I wanna try it but not sure?
@MissKissKreations
2 жыл бұрын
It’s going to be one of my next videos actually! 😁
@janacamp7024
2 жыл бұрын
@@MissKissKreations can't wait to see it💗 I love watching you
@kathywilliams5732
2 жыл бұрын
So lovely! Thanks. I have several acrylic paints but no pouring paints. There is something I can add at home to make them pourable I would think?
@MissKissKreations
2 жыл бұрын
You can use acrylic paints as well! If the paints don't run down the cup, you may have to water them down. That's why I love these paints, you don't have to water down and you get to still have the vibrant colors!
@akarph
2 жыл бұрын
You can add floetrol.
@kathywilliams5732
2 жыл бұрын
@@MissKissKreations and such incredible colors!!
@stevewalls5070
9 ай бұрын
What about using a pouring medium instead of water or floetrol just wondering
@MissKissKreations
7 ай бұрын
Try it and see how it works ☺️
@laurabrey3128
Жыл бұрын
Did you spray paint or mod podge first?
@beckylayne2323
Жыл бұрын
Can you do this to acrylic tumblers? What kind of ventilation do you use for the epoxy?
@MissKissKreations
Жыл бұрын
I’ve only epoxied on stainless steel and I have two windows that I put window fans in. I keep them running an hour before epoxying and 4 hours after epoxy. They pull the air and any fumes out. Also, don’t forget the respirator mask.
@laurabrey3128
Жыл бұрын
What kind of tumblers do you use?
@heather6110
2 жыл бұрын
I came acrossed your video tonight. I love these, but can it be done with a double wall plastic tumbler?
@MissKissKreations
2 жыл бұрын
I’ve seen people do it. I’ve never done it before
@ebileva
2 жыл бұрын
Beautiful! One question though... your paint runs all the way down to the rim, when it's on the cup turner and you resin it it's still up to the rim, but when you show the final result there's a few milimeters blank. It almost looks like glass. How do you do that? It looks so clean!
@MissKissKreations
2 жыл бұрын
Thank you for watching! 😊 it takes a lot of practice. But, I did go over the steps in the video. Exacto knife and sand paper for the win.
@SheTaz77
2 жыл бұрын
If you're talking about the top part that's clear, that's the lid.
@ebileva
2 жыл бұрын
@@SheTaz77 yeah, shame on me, i noticed that later 😅
@laurabrey3128
Жыл бұрын
Can i use regular tumblers as well?
@jenniferchaffin1762
2 жыл бұрын
why do you need to paint white first?
@akarph
2 жыл бұрын
At one point you said you don't sand your tumblers as part of the prepping process. Are you still not sanding your tumblers?
@MissKissKreations
2 жыл бұрын
Honestly, I have two tumblers I’ve had for four years that I didn’t sand. Still in perfect condition. But, it caused so much controversial on whether to sand or not with my followers, so, I just sand now to avoid the negative comments.
@akarph
2 жыл бұрын
@@MissKissKreations Thank you! I tried making a tumbler without sanding and it works fine. It's for me so I'll watch to see if I have any issues. It's about 9 months old now. Thanks again for this tutorial. You are great!
@Cabochons
2 жыл бұрын
Do you worry about people drinking from the edge when you put epoxy on it?
@MissKissKreations
2 жыл бұрын
All of the tumblers come with straws. 🙂
@ChristaJeanice
2 жыл бұрын
Please help. My pours come out so beautiful each time but when I seal with resin, the resin is repelling and making my tumbler bumpy. I’m so tired of messing up my cups. I’ve sealed the pour with clear spray before adding resin.
@MissKissKreations
2 жыл бұрын
Hey there, make sure you are prepping the tumbler by sanding your tumbler then adding 91% alcohol. Also, make sure you are using water based paints. If you are using oil base paints, you will have to seal the paints once dried. You will need to add two layers of mod podge then add your epoxy. Epoxy will repel with the oil based paints.
@tanekagriffin4611
2 жыл бұрын
I have a question. What is the process called when you put your tumbler in the oven to dry ? I have seen people do that and I’m not sure why or what’s the reason. Help please lol
@MissKissKreations
2 жыл бұрын
Sublimation 😃
@mstressboss
2 жыл бұрын
How much paint do you use approximately?
@MissKissKreations
2 жыл бұрын
about 40 ML total
@barbaraogleaby7051
2 жыл бұрын
Is yiur base paint of white flat or gloss?
@MissKissKreations
2 жыл бұрын
It is Pop Of Color Paint
@erikas.1810
2 жыл бұрын
I can’t never get mine too cover the whole cup ugh
@MissKissKreations
2 жыл бұрын
If it doesn’t, try watering down the paints with a little bit of water
Пікірлер: 65