Hwy83 SUZUKI, love your show. I started welding them up way back in the day and i'm not the only person on the planet doing this. My machinist friend grinds them back down. Started with brazo flux and bronze rod gas weld after block was in a old house oven in the shop 500degs. Now I tig weld them with Nickel. Blue Demon ERNI55 X 1/8" X 36" X 1LB Tube nickel 55 cast iron TIG welding rod. $39 amazo n. They have never re-cracked and my turbo 1.6L has been in the rig back in 2014. Why they ever took out weld shop out of school.
@andrews3320
4 жыл бұрын
that's legendary, thanks for sharing, please post a video or pictures link here, man
@Hwy83SUZUKI
3 жыл бұрын
That is excellent to hear about the repair quality. That is why we have been collecting the cracked blocks over the years and not discarding them. Figured one day people will want to buy them even with the crack and they will repair them themselves 👍🏼
@REVNUMANEWBERN
3 жыл бұрын
Maybe you should offer the service reasonably & advertise
@ckc1802
3 жыл бұрын
I thought the block was aluminum ?
@alcopower5710
2 жыл бұрын
How much would you charge for that repair? 💰
@tfox6683
3 жыл бұрын
bought a 1995 sidekick today, an automatic from a lil old lady. Watching this video got me pumped!
@Hwy83SUZUKI
3 жыл бұрын
Awesome! Nice buy😁👌
@nunapitchuk
4 жыл бұрын
Yes, 50% cracked. I have four 1.6L blocks that I have pulled apart. Guess what. Two of them are cracked and are now driveway decorations. I showed the cracks in a couple of my videos too. Love your presentation style.
@Hwy83SUZUKI
4 жыл бұрын
Appreciate the positive feedback! Plenty of decorations blocks are laying around here too unfortunately ...
@locomojo0485
3 жыл бұрын
I had the same exact crank in mine... I said fk that, put it all together new gaskets and seals and drove it 3 states away and back at 80mph on interstate. no issues. no leaks, AC worked. sold it a couple months later when 5th gear started to pop out. engine still ran flawless. the aluminum is cracked, the cylinder bore is a steel sleeve, it's still fine. Don't sweat it, go or blow. I drove the thing at 80-85mph in 4th gear, redlining it for near an hour when 5th went out... didn't skip a beat. this was in a 94 2wd tracker.
@locomojo0485
3 жыл бұрын
I had the same exact crank in mine... I said fk that, put it all together new gaskets and seals and drove it 3 states away and back at 80mph on interstate. no issues. no leaks, AC worked. sold it a couple months later when 5th gear started to pop out. engine still ran flawless. the aluminum is cracked, the cylinder bore is a steel sleeve, it's still fine. Don't sweat it, go or blow. I drove the thing at 80-85mph in 4th gear, redlining it for near an hour when 5th went out... didn't skip a beat. this was in a 94 2wd tracker.
@salami99
Жыл бұрын
nice
@WannabXiii
4 жыл бұрын
If you don’t take them apart they will never crack. 😉
@DigitalJeremy
3 жыл бұрын
lol Schrödinger's engine block !
@speedfreak8200
2 жыл бұрын
Does a Crack make the engine fail & can the Crack be tig welded & smoothed out? I can pull long hills @ 50mph in 4th with 1.6 ....8 valve 1.3 wound out in 3rd @ 35 both with 32/36 ......... building a 1.3 waste of time
@gypsonny2
Жыл бұрын
@@speedfreak8200 the crack will typically not cause failure is my understanding. However it is irreparable and nobody will rebuild your engine if it is cracked
@TheShmeebitdog
3 жыл бұрын
I don’t understand why machine shops won’t touch a cracked block it’s a super easy fix especially in a place that easy to Access
@REVNUMANEWBERN
3 жыл бұрын
Was thinking the same, they should give a option maybe like repair it but have 1/2 the warranty, I'd do that
@USdefender1
3 жыл бұрын
Great video, and very informative, thanks! Now that the pleasantries are out the way. I've got a 97 Tracker, and I don't give a sh.t if it has a crack or not. It doesn't effect anything, and I drive the snot of it. If it breaks it breaks. I'll just fix it, and drive it hard again. I'm not going to stop enjoying it. After all, they are made to to be driven.
@Hwy83SUZUKI
3 жыл бұрын
Drive it like ya stole it! 💪🏼
@JunJun-tg7tu
3 жыл бұрын
Wow man! You have all these toys! I love Samurais. Thanks for the video
@Hwy83SUZUKI
3 жыл бұрын
Thanks for watching!
@Zuk_4_life
4 жыл бұрын
That shop is what dreams are made of! Crack an A-Rodge for me!
@Hwy83SUZUKI
4 жыл бұрын
Thanks man! Cheers 😁🍻
@punkueto
5 ай бұрын
Justo eso le paso a mi motor cuando lo abrieron salio roto y tuve que conseguir otro. thanks for you a knowledge
@codyswilley
4 жыл бұрын
Glad you told me that dirty little secret. I put the 1.6 8v in my 87 suzuki samurai. Added and lift and waiting on tires now. Love your videos. Wish I could just walk around the highway 83 place. I would want everything.
@Hwy83SUZUKI
4 жыл бұрын
Thank you for the compliments, maybe one day you can visit!
@codyswilley
4 жыл бұрын
@@Hwy83SUZUKI I hope so
@aboel3zz
2 ай бұрын
I am thinking of putting 1.6 v8, shall I proceed or I have to consider other engine?
@TheBillproject
4 жыл бұрын
lol little power but they were bulletproof. put 385,000 km on mine before the transmission popped a 2nd time. Best car I had as a teenager lol never had a speeding ticket !
@renegademind1833
3 жыл бұрын
After further consideration of this crack problem. I came to the conclusion that because the lower bottom bearing shell is in there, The crack will not effect anything. Yes, a rebuild is a different story. If you have the oil tested, they can determine bearing wear. Oil pressure could reflect wear as well. My advice, Is to do regular oil changes with high grade oil any comments? Thanks
@salami99
Жыл бұрын
could this crack cause oil burning or coolant burning?
@iancormie9916
3 жыл бұрын
Great info. 3 questions: 1) Have you seen the same issues with the 1.5 liter engines - these are common overseas? 2) Can you tell me a proximate difference in weight between the 1.3 (SOHC and DOHC) Vs 1.6 liter engines. 3). Do the bearing journals eventually fail in the 1.6 engines or is it something you can live with or fix? Thanks.
@braddahdussifyoumuss596
4 жыл бұрын
How can you tell if your 1.6 comes with the support girdle in the block🤷🏼♂️
@jdbutler1874
Жыл бұрын
Tony Montana you are hilarious! Luv ya brother. I gotta get up your way with Miller in hand!
@Hwy83SUZUKI
Жыл бұрын
Datttts OK mang!
@jesselost05420
Жыл бұрын
Tore mine apart and luckily I did not have that issue. I do have a jacked crankshaft, and a broken piston connecting rod though
@richardbutch1617
4 жыл бұрын
Who cares if it has a crack. The Suzuki's Sidekicks and Geo Trackers still last for a long time. If your engine is shot just go buy a used one. I have a 98 Chevy Tracker approaching 300,000 miles and it still runs pretty good for the miles on it. I also have a 96 Geo Tracker with 40,000 miles that looks and runs like brand new. The main problem I have seen is that the paint jobs from the factory don't seem to last as long as they should. I live in Florida so I guess with the hot sun I should expect that. But as far as running goes they take a licking and keep on ticking.
@Sasuke-bh6yv
3 жыл бұрын
I need info on where to get a 99 geo tracker 1.6l Engine I cant find anywhere
@renegademind1833
3 жыл бұрын
So are you saying dont worry about it and just keep driving it.. but does a crack cause engine seizure or something?
@dandahermitseals5582
Жыл бұрын
What happens if you put it back together?
@jaketurnbull214
3 жыл бұрын
Just found your channel and I’m fucking laughing and also happy, good shit mane
@Hwy83SUZUKI
3 жыл бұрын
Glad you're enjoying the videos 😁🍻
@migueljose2126
4 жыл бұрын
Excelente video desde un fanatico en Costa Rica. Great✌
@Francixco4x4
3 жыл бұрын
I have 3 suzuki 1.6 16v engines, running very well, always with the doubt if they have this famous crack in the engine block
@mattc9875
Жыл бұрын
Nice Scarface/Donnie Brasco impersonation XD love your vids pal!
@Hwy83SUZUKI
Жыл бұрын
Thanks for watching!
@mattc9875
Жыл бұрын
@@Hwy83SUZUKI I'll take advantage of your expertise if I may as I saw many of your videos, including the "what to look for" guide on these cars. I am looking at a 1995 Suzuki Sidekick, 4-speed auto South FL car with with 122k miles on the odo. I could not see any trace of rust. Engine & trans seem to run smooth. It's the 2 door with removable sunroof. Would you consider this a generally safe/reliable investment in terms of maintenance, miles and cost of parts ($3.5k)? I do basic maintenance on my vehicles but they are large GM V8s with huge engine bays and easy to reach things. This is small but seems also easy to access. I heard Suzuki left the US market but I believe parts for these cars are still abundant and easy to find? Any input from you would be GREAT!
@Microplastic_Therapy
3 жыл бұрын
I would definitely do a diesel swap on one of these cars
@meisterraul
Жыл бұрын
I confirm. Saw it a month ago when I teared down my engine :( But I used to race this car...offroad racing. G16A 8v It cracked exactly like the one in your video. My engine also had a knocking at high rpm. It sounded like a diesel Since a couple of months oil light came on when the engine was very hot so I've decided to tear it down and repair it. So I've abandoned it and got a 16v. So your telling that the engine can be used like this? My engine had the girdle but the 16v didn't. So I've installed the girdle on my 1.6 but I've united the two pieces with some welded steel plates. Best wishes from Romania!
@mick5740
Жыл бұрын
Lol. Hilarious. And I’m just discovered your chanel. Looks cool. I want to get into these trucks jeeps whatever trackers. Neat rigs
@Korellix125
2 ай бұрын
If I was to ever engine swap a 1.6L 16 valve in the future what is the most durable Suzuki engine?
@user-uy8yx2lz1o
7 ай бұрын
I’m from Cleveland Ohio I have a 1996 GO tracker, I had a lot repair gas tank fuel pump fuel filter fuel injectors distributor plugs, and wires just for the mechanic to tell me that the engine wasn’t no good. I have a whole car here. Are you interested in buying it?
@Hwy83SUZUKI
7 ай бұрын
Thanks for the offer, but you're too far away
@troyscottstevenson
3 жыл бұрын
Very entertaining stuff here. great video
@Hwy83SUZUKI
3 жыл бұрын
Glad you're enjoying the videos! 🍻
@markgeletzke6328
4 жыл бұрын
Do you see this more in 16v than 8v 1.6 or is it a generalized thing where it doesn't matter between 8 or 16v engines.. I ask as I found a 1.6 8v with 5speed that came from a wrecking yard in Santa Barbara with 119k on odometer, that's all the info the guy was given when he bought it. He bought for trans. He has 91 tracker and eng & trans are 89 and says trans different than his so is selling.. The price has me wondering, it looks original, doesn't look opened up but he's only asking $100 for eng..Wonder if he's telling me the truth ? And which engines came with girdle 8 or 16v ? Manual or auto ?
@vincenttschida8849
3 жыл бұрын
Wow this is a cool channel. I just subscribed. I have a 1.6 8v sitting in my shed. You have me worried now.
@angusbarker5733
3 жыл бұрын
From the sounds of it thats a baleno g16b and theyre less prone to cracking
@angusbarker5733
3 жыл бұрын
Fairly sure anyway
@000014mcfoxx
3 жыл бұрын
I need the head off. An. 8v. Lifter sets. Especially
@fedup7416
3 жыл бұрын
Kind of late to the party, but have you tried putting a 2L engine into the trackers?
@wilbertb1929
3 жыл бұрын
I want to buy a samurai to get started on, but damn they're overpriced.
@aaronfritz7234
6 ай бұрын
Do you know any way to identify the blocks with main cap reinforcement?
@MrRerod
10 ай бұрын
Great but disappointing info.. So whats the best engine swap?
@NotFarmerFlats
2 жыл бұрын
Does this apply to the g16b blocks? I've heard the only real difference with the B designation is an improved casting, and it was offered on later years.
@hassanhaddad_official8367
6 ай бұрын
Hello bro where can I find a frame fom my suzuki vitara 94 soft top?
@williammccallister5855
2 ай бұрын
Interested in a 1.3 out of a running driving 94 swift automatic
@user-hi9ug3cb5q
5 ай бұрын
thanks for the heads up... i just bought a 97 Geo Tracker with the 1.6 . Is there an outward indication of this issue at all? What is a good fit and replacement if needed?
@fl6stringer
5 ай бұрын
Do you happen to know what year they began using the bracing?
@drones4L45
3 жыл бұрын
Will the 1.3 samurai bolt up to the 98 tracker manual tyranny are they close or the same?
@user-ed8gg7yy8b
9 ай бұрын
Can a 1.6 or 1.3 engine be swapped into a 1999 Tracker with a 2.0 engine?
@jacobrife7694
2 ай бұрын
Well I guess I’m never rebuilding the bottom end 😂
@ResidentEvil2860
3 жыл бұрын
bought an automatic 2wd i’m not scared anymore. 😂
@last.chance_24
3 жыл бұрын
Mine has a rod knock but I already ripped it out and I’m dropping in a VW 1.9 TDI ALH so no longer a problem
@sweet65mustang
3 жыл бұрын
If a 1.6 block is cracked in the #2 journal and no one removes the crank, is it really cracked?
@mark_osborne
3 жыл бұрын
Exactly !.... run it to 300,000 miles (which they will do) and tear it apart and let us know ..:-)
@rafreyes9944
2 жыл бұрын
Does this happen to both the G16A and the G16B? I'm guessing they use the same block, unless suzuki fixed it in later models.
@Hwy83SUZUKI
2 жыл бұрын
Yes can be found in both
@Thepreppersbunkeroutdoors
Жыл бұрын
So you mentioned you wont notice any issues from it... So what if you rebuild it anyways even if it is cracked?
@indianchief741
3 жыл бұрын
1999 chevy Trackers ok? body on mine is mint. but still Suzuki motor. runs really good. just wondering.
@johnpayne3156
2 жыл бұрын
Not getting fire from the distributor to the plugs. Have replaced wires and plugs. Timing is set. Any suggestions on my problem?
@REVNUMANEWBERN
3 жыл бұрын
WELL, was thinking about buying a 87 locally, after seeing this episode I may change my mind
@चेतन_महाराष्ट्र
4 жыл бұрын
Thanks buddy!
@Logan-ce2uh
2 жыл бұрын
Does anybody have a solution for the cracking issue, like a slight radius on the very sharp edge of the bearing journal can reduce the stress riser perhaps? I know where there’s a problem there’s always a solution.
@ka4172
Жыл бұрын
16 Valve engine? Damned i have three of them ha ha! Hope from an old Lady and a old Hunter driven sidekick .
@chriscaris9292
3 жыл бұрын
Dude is seriously cool AF!!
@allenmadsen408
3 жыл бұрын
I am in Oz, you have some great info here. I just bought a 2007 Vitara manual that is getting stuck in 5th gear, could your spring and bushes be the cause? Not a good transmission guy in town. Cheers mate
@DigitalJeremy
3 жыл бұрын
OMG look at all those Sidekicks.....subbeeddddd (I have a '92 Geo Tracker; picked up a spare engine to build up a while ago. Hopefully it's a good block....)
@renegademind1833
3 жыл бұрын
Damn.. if you don't know it's cracked @ #2 or any others.. does the engine die/seize on the crank...or what? ??? So why buy a 1.6L tracker or sidekick for a lot of money if they are nearly all f**kd.. I dont get it. I'm buying a Geo Tracker 4dr today @ 12pm on a $500 deposit.. geeze... I'm worried now.. If I was younger I'd fix it or something.. ARE THERE ANY WARNING SIGNS?? Anyway's.. lov your Videos, keep'm coming! Thanks so much.. yer the best
@snowcold903
3 жыл бұрын
good to know. i was looking at a suzuki vitara with an 1.6. but its a low mileage one
@tonebone559
2 жыл бұрын
Cat scared me ASAP 🤣
@damonfoster3974
Жыл бұрын
What can you replace that engine with are some other alternatives
@douglascessna5830
Жыл бұрын
Can't find anywhere to get a new 1.6 to put in my tracker
@ReaganReese
4 жыл бұрын
Very informative!! Wouldn’t it just be ok to build the engine even if it’s got that crack? Really thinking about rebuilding mine, but as you’ve said with high milage and the 5 speed, it’s almost certainly cracked.
@beccaabbott-mccune4843
4 жыл бұрын
I'd like to know this too
@bigjim8088
4 жыл бұрын
Me too. Someone should do it. I will if I ever rebuild mine and can't find one reasonable. Unless someone proves it to be complete disaster.
@joseheredia898
3 жыл бұрын
Is a husing in the back of the engine where the heater hose connects and i cant find it no where any help?
@timrieck420
9 ай бұрын
is this the G16A Engine ?
@Ghosts_and_Cars
Жыл бұрын
Will that girdle fit the 1.3 and would one use 1.3 bolts or 1.6 main bolts due to length ?
@Kalkas53
3 жыл бұрын
got a 93 japanese jimny and I want to engine swap it I'm thinking a g16 but maybe I should think elsewhere
@braddahdussifyoumuss596
4 жыл бұрын
Hey so I was planning on ordering a ac system for a 96 Geo tracker from you guys, how much would that cost and how much for shipping to hawaii
@yasharebrahimian8301
6 ай бұрын
hello i have a 98 Tracker 1.6L 16V and want to deleting the EGR system and want to know what i need to do if anyone could help me out rally apricated
@hawkhollar1228
3 жыл бұрын
TONY....I got a 97 geo tracker that anti freeze comes out of the tailpipe. ....???? Did a head gasket and that wasn't it
@Logan-ce2uh
2 жыл бұрын
Does anybody have a proposed solution, like maybe radius in the very sharp edge of the berrying journal to reduce the stress riser perhaps?
@kristianwhite9058
2 жыл бұрын
Thanks for your videos, helps alot. Quick question for ya, my issue is my blower motor control switch. i have watched your video on using a zip tie to gently pull the switch together but I have no play in it. It works on level 2 and 3 but not on 1 and 4. Can you replace the switch itself and if so can you source one for me? I have a 93 Suzuki Sidekick 4x4. Thanks in advance for your help. Stephen.
@joyridefiends
2 жыл бұрын
Any chance you might know why my 92 suzuki sidekick 1.6 16valve has spark coming from the coil only when i first crank the engine and another spark when i stop cranking it? It wont spark while cranking just the very first crank and at the end no constant spark? Thinking maybe the crank sensor or the distributor which was replaced but that was a long time ago
@outdoorseyfun9842
Жыл бұрын
What causes them to crack and what is the fix?
@andresfelipeariasgomez3929
3 жыл бұрын
hola amigo muy buen dia soy colombiano y estoy arreglando un chevrolet samurai 1.3 pero no consigo muchos repuestos sera que sted me puede ayudar un poco con eso
@rockyfish3115
2 жыл бұрын
There called the grand vitara in the UK the gv 1600 or the previous model was the jx/jlx what year engine are you on about?
@MP-li2ho
Жыл бұрын
I’m new to this sort of stuff , but if the engine ran good even when you at that time didn’t no it was cracked , then it seems the crack isn’t affecting the running ability , so why not still rebuild the 1.6. Like you said the engine was running great even when it was cracked. Another question is there a way to fix the crack cheaply or can you fix it like you did the crank end with epoxy thanks I’m sure these are dumb questions probably ,oh well we keep on learning and then we die.
@asasnet2012
Жыл бұрын
Is it the G16A or G16B?? Thank you.
@joelology6485
3 жыл бұрын
dude i love the energy in this shist
@sweet65mustang
3 жыл бұрын
So I'm looking at getting another trackick, a 98 sidekick sport with a 1.8l. I hear bad things about them, are they worth messing with or something to stay away from?
@Hwy83SUZUKI
3 жыл бұрын
The sport model can have top end issues especially if maintenance wasn't done. The oil ports can become clogged and starve the top end of oil. Again if maintenance wasn't done such as timing chains that can also be an issue. But a well-maintained 1.8 is a strong running engine. also many guys are swapping in 2.0 or 2.3 L engines in place in case you would be interested in that as well. Personally I love the sport body style looks and added luxury options they come with
@nabilkakyi
4 жыл бұрын
Can you tell me which kinde of engine I can swap for vitara.. Because the factory engine is small
@warntheidiotmasses7114
2 жыл бұрын
Highway 83 in Wisconsin? lol I used to live in Waukesha. My son still lives there. You want to buy my 82 Silver Wing up in storage?
@buildingusa9604
3 жыл бұрын
Awesome video 📹 👏 I'm having a little issue with a 1.3L swap on a 1984 Suzuki Jimmy and the motor mount don't match any advice that can help me
@williamguilfoyle3068
3 жыл бұрын
Hockey puck
@gschimbeck
3 жыл бұрын
Now i know where all tge samurai's have gone. Thanks for the 1.6 info. In your opinion how would you squeeze a few more HP out of the 1.3 just asking for a friend.
@Hwy83SUZUKI
3 жыл бұрын
carb upgrade, Harley or myside in addition to a header
@robormiston2841
3 жыл бұрын
Shave the head .010, thinner head gasket, headers and bigger exhaust gets power out of any motor. Better coils too.
@hooliganxmotorsports6944
Жыл бұрын
Hey man I have a 1995 Gro Tracker and want to do a 2.0 / 4 speed swap. Any advice?
@fastbyte9972
Жыл бұрын
How much does a headless engine that is not cracked sell for these days?
@paultrimble9390
3 жыл бұрын
Hello Then riddle me this. Should I just rebuild my 1.3 to get more power or do 1.6 swap hope get motor that’s not cracked. Mine runs good just no power. I have toy 250 carb swap thinking about header tony what’s ur opinion thanks
@rafapereira129
3 жыл бұрын
get an dohc g13b head and a g16b block ...
@4EverSuzuki
3 жыл бұрын
Have you seen this on both the G16a and b or is it specific to one mainly?
@reneguay1347
3 ай бұрын
Do you know where i can get a 2 piece convertible roof for my 91 samurai
@Hwy83SUZUKI
3 ай бұрын
Rallytops.com
@pipingSaws
3 жыл бұрын
Was there certain years that had the brace for the main caps?
@REVNUMANEWBERN
3 жыл бұрын
EXCELLENT Idea, and will the brace work on ALL engines? And if so WHO sells such ?
@T_TanksTinkers1066
2 жыл бұрын
Hey out of curiosity what's your opinion on the later model year G13BB that comes out of the metro's? almost fully bolt in from what I've read up and they were used in model years of our samurai we didn't get
@kylem9196
4 жыл бұрын
hey mang if I gots a 92 tracker wit a bad motor instead of tossin one of dez tings back in what would you suggest as a replacement?
@REVNUMANEWBERN
3 жыл бұрын
I've heard of the old VW Rabbit Diesel engines being put in them, there is a kit out there
@SEecho3
9 ай бұрын
Hey Tony what to do when you find oil in your coolant?😢
@Hwy83SUZUKI
9 ай бұрын
Head gasket failure
@mohamedRajab-yy6px
3 жыл бұрын
Is any way to fiend new G16B engine or block zero milage
@novinnovations4026
2 жыл бұрын
strip and rebuild a block yourself, that is the only way unfortunately. there are no brand new blocks sitting anywhere :'(
@BoutThatAction
3 жыл бұрын
3:06 - 3:20 the struggle is real haaahahaha
@Hwy83SUZUKI
3 жыл бұрын
The answer is always 🍻😁
@rhettkutney1935
3 жыл бұрын
good insight. something i wasnt aware of. currently am searching for a 1.6l 16v. for a swap in my 87 sammy. maybe i should consider something else? have a new 1.3 rebuilt low range. starts like crap in winter with sidewinder. maybe i should just fuel inject?? what do u think
@samaxeman123
2 жыл бұрын
go the 1.6 16 valve, so much power for the sammy. its awesome
@justinratcliff4662
Жыл бұрын
I need a crank for a 1.3 liter who has 1
@rickeagle
4 жыл бұрын
What is the alternative? The 2.0 liter?
@brockukg
3 жыл бұрын
are these the g16a 16v or g16b 16vg engines? just got a g16b out of a grand vitara for my samurai so wondering wether i need to have a look haha
@DaBossk
3 жыл бұрын
Hello Hwy83 SUZUKI! don't suppose you sell parts? im trying to get a placement softtop for my 200 chevy tracker... thanks! please respond!
Пікірлер: 277