I opened the top of mine using a plastic clay knife 😂 I was scared to open it until I watched your video! Thank you! 👍 I highly recommend covering the beeper hole with tape if you want to make it quieter! Make pin holes in the tape if it's too quiet 😉 Now I don't wake the whole house when I fancy a late meal 😅
@blackgriffinxx
2 жыл бұрын
Thank you this show me the way to open that damn thing . I got a broken Power XL vortex 10 Qt from someone . They got the money back but they let them kept it. They throw it to me to see if i can fix it. The top on this one was made 4 piece . first was the black top. It was pop off. Use a very small chisel to pry it up. 2 screws hold the face plate for the touch scree. The safety switch is right behind that . That has clips on it . Then a ring that is screwed down to the main body shell. All that was wrong with it was the the safety was not plug in and a loose wire for the touch screen.
@Captiv8r75
Жыл бұрын
Thanks for the video. Very helpful for repairing my neighbor's air fryer!
@calebg5326
3 жыл бұрын
I found one in the dumpster today Andi t works I always wanted one after I seen my friends.im breaking it down and cleaning it.we all need to recycle I apriciate your video it helped me understand what I was getting into.
@ralphmaster
3 жыл бұрын
I’m happy my video was helpful
@andrewwalsh2755
23 күн бұрын
Very useful, thanks. Looking at another video, I think there may be a fuse along the blue wire, covered by protective sleeve? If that fuse has blown, then that could be a reason for the unit not working?
@adamclifford1278
2 жыл бұрын
Very clear.Thanks very much.Really helped!
@ralphmaster
2 жыл бұрын
excellent, that comment make me happy, happy to help!
@meltonermeltoner
3 жыл бұрын
thanks man just fixed my air fryer due to ur video!
@ralphmaster
2 жыл бұрын
Im so happy you were able to make it watching my video!
@user-io7dh1zt8x
7 ай бұрын
I like the video . I have the same model but my fan is not going around. Everything else is working. Any help please . Thanks
@sarahmcintosh9068
12 күн бұрын
I need to clean the area around the back of the heating element. This video didn't disassemble the machine far enough to show me how to get to that.. or is that just not possible?
@markchau949
Жыл бұрын
Do you know how to take apart the lower compartment to clean (near heating element)? I have a lot of oil buildup which causes smoke when in use.
@markspacek6468
2 жыл бұрын
I just got one second hand. I tested it heading some frozen french fries which seemed to work fine. However the little red light doesn't light up - the one that's supposed to be in the middle of the animated blue fan lights. Not sure if I should worry about this or not. Anyone have thoughts on the subject? Thanks...
@deanosaur808
8 ай бұрын
The red light doesn't seem to do anything. It's stays on during cooking, even at low temperatures when the heating element turns on and off 🤷 I wouldn't worry if there are no other problems.
@DJKINGS2011
3 жыл бұрын
Thanks i need this
@jasonsmith3021
3 жыл бұрын
You have a monster inside your house. I swear I heard it.
@ralphmaster
2 жыл бұрын
lol I think that was my wife sneezing :)
@Gamer606YT
4 жыл бұрын
Cool
@ttwtech
3 жыл бұрын
Anyone know where to get this power board?
@ad-hj6ig
6 ай бұрын
allergies?
@angiel3114
2 жыл бұрын
Only problem with mine is that is not heating up.
@kbauermann
2 жыл бұрын
Same here. Everything works just as it normally would, but not heating up.
@angiel3114
2 жыл бұрын
That's the part that it needs to heat up the range. Now it works perfectly.
@kbauermann
2 жыл бұрын
@@angiel3114 do you mean the heating element / resistance? Did you have to replace it?
@angiel3114
2 жыл бұрын
@@kbauermann yes now the air fryer it's working fine.
@kbauermann
2 жыл бұрын
@@angiel3114 that's great! thanks for your quick reply and nice to hear your machine is back to work! :)
@osmannigarcia5290
2 жыл бұрын
I have one like that but is not working it start an the fan work but the heating part not working
@ralphmaster
2 жыл бұрын
has to check if the relay is passing current, or just test the resistor that heats the air, must be open, if that is the case it needs to be changed but not sure you will find one the same size and characteristics, I think start looking a at the relay
@osmannigarcia5290
2 жыл бұрын
@@ralphmaster tanx i have fix it the digital bord was not good i had two change it for a new one
Пікірлер: 31