wtf they’re making plastic oil pans now??? just when I thought new cars couldn’t get shittier. they keep proving me wrong
@helixleviathan2620
Ай бұрын
Have been since before 2010
@peterd4487
Ай бұрын
Weight and manufacturing cost reduction!
@peterd4487
Ай бұрын
Also lifetime reduction!
@jacobpoucher
Ай бұрын
@kd_76 you are 2 decades too late boy.
@justinsmet
Ай бұрын
@peterd4487 yeah manufacturing cost makes it cheaper but for the costumer more expensive
@xcofcd
Ай бұрын
30-37Nm is more than most of the plugs on metal pans on smaller cars get. They're around 25Nm...
@jasonpocaro2730
Ай бұрын
We have a special vacuum tool FM 😮 We DO NOT remove the drain plug on ANY vehicle that's plastic pan Pandora's Box trap 😂
@timg2088
Ай бұрын
Our shop refuses to do them because the plastic threads come out.
@helixleviathan2620
Ай бұрын
Clearly not a well setup shop then.
@jamram9924
Ай бұрын
Mighty vac vacuum tool or install a stainless steel ball valve with some blue teflon tape. Problem solved!
@helixleviathan2620
Ай бұрын
@@jamram9924 always a way around problems. Problem solving and diagnosing are imperative to a good workshop and technician. If they refuse this work for that reason alone id jump ship 😂
@alexandergunaka666
Ай бұрын
Those exact pans already are know for issues. Mostly when removing the bolt. Even if torqued properly prior the whole component of the metal threads comes out without the plug spinning at all.
@BigBadBalrog
Ай бұрын
And it only ever strips out the pan on the single mom who got conventional because money’s tight, never the beamer who made a racist joke in the lobby and can afford it
@gregc33487
Ай бұрын
Crazy how true that is
@Texmexpride
Ай бұрын
Maybe replace it with aftermarket metal pans
@garrettyankton5411
Ай бұрын
Guess what my 97 Subaru has, all METAL PARTS. Plus if my engine blows its 1k for a rebuild.
@IronFishChannel
Ай бұрын
People unfairly shit on Subarus all the time but they're well built for the most part even today. I'd take some oil leaks over half the engine being made out of plastic.
@teamlows
Ай бұрын
Those plastic oil pans are making shops lots of money
@jamram9924
Ай бұрын
Mighty Vac has a vacuum tool. Manual or driven by air compressor. We also have issues with aluminum pans because of the threads and over tightened drain plugs. We install stainless steel ball valves. Problem solved.
@shekharmoona544
Ай бұрын
Some of these pans are a metal pan with a metal core. The move to this type of pan was to save weight. Less weight equates to better gas mileage and better performance. On a part as vital as an oil pan look for an aftermarket metal pan.
@DDnight546
Ай бұрын
I think a alu pan should be an option when you pick up the trim.
@davidlow9777
Ай бұрын
That’s corporate greed for you, not only did corporate executives sent manufacturing jobs overseas to increase their profits and get HUGE bonuses but now they’re cutting corners with POOR “quality” to get even more money! Vote for more regulations to safeguard workers jobs and stop this madness, vote 🗳️!
@nickhudson4726
Ай бұрын
i was doing an oil change on a 24 rogue with the 1.5l and the plastic oil pan it was a little tight then i popped the whole insert with the threads out hot oil all over me and had to sell the customer a whole oil pan
@ChrisJRSpro
Ай бұрын
I get nervous just looking at it bro lol
@FluffyMexicanik
Ай бұрын
Lmao have you ever removed a plug and it creeks? Lol or you trying to crush the crush washer at it eeks at you 😅
@ChrisJRSpro
Ай бұрын
@@FluffyMexicanik Yessss!!! I go super slow on those I see them flex sometimes. 😬
@dcomputers
Ай бұрын
I dont even use a torque wrench on that. It may strip on the lowest setting.
@AhhSamboi
Ай бұрын
That is terrifying to have plastic down there.
@user-ct7wc3fx4q
Ай бұрын
Maybe Jiffylube messed up way too many times and someone decided to make that kind of pan. 😅
@pv3782
Ай бұрын
If it’s not high quality ABS plastic I would feel the same way
@Nonexistanthuman
Ай бұрын
It is some high grade plastic but its still crap to put under a car. You could have a rock pierce the pan. Who knows what could go on after
@jasonK1375
Ай бұрын
Come to my shop. Tbey use frigging air guns to put thos things in. And yes. Plastic oil pans are the devil.
@kumaramd9795
Ай бұрын
Been seeing that crap for years, especially with them vw/audi pure failure.
@ozzykrahn806
Ай бұрын
this set up isnt bad, try the ford pick up with the cam style drain plug with a sway bar in the way
@bulldogmack
Ай бұрын
At my shop the bought a vacumm machine and they make us do the oil change through the dipstick tube (stupid because you cannot get all the oil) because rogues oil pan are always on back order... every time that I see a "service champion" oil filter I know I have to recommend a new oil pan 😂😂
@Direct.injection212
Ай бұрын
Get a fumoto engine oil drain plug.
@FluffyMexicanik
Ай бұрын
What? Im only working on the vehicles....they arent mine
@MODERNWHAMIN-are-trashh
Ай бұрын
That’s gotta be a ferd
@jmilko917
Ай бұрын
Nice size whatever puncture that too easily smh
@frankbonura5710
Ай бұрын
Wait till Dorman makes a steel pan.
@paulfeasal6024
Ай бұрын
I heard Ford has issues with them too. However some of the vehicles they change out the pan every time. New ways to male money from cheap products. Ford's pans are plastic.
@ultraELLAZAR
Ай бұрын
I don't remember if it was a rogue or altima, but I experienced a vehicle that the insert pulled out on the first oil change 😂
@dariush3587
Ай бұрын
The fact that you definitely remember that it was a Nissan should be concerning to people who buy those things.
@kelpking4484
Ай бұрын
@@dariush3587 Dodge does it Chevy does it Ford does it Nissan does it Volkswagen does it this is the new way bruh they all have plastic oil pans
@dariush3587
Ай бұрын
@@kelpking4484 That's good to know. To be fair my issues with Nissan are way more concerning than the oil pan 😂
@gBuckKOM
Ай бұрын
Don't know about the plastic pans, but my Subaru has a crush washer that you have to change every time and it makes me feel better about it.
@danieljaime22
Ай бұрын
I agree Fluff absolutely insane planned failures for a disaster 😢😅
@dinosabatelllo464
Ай бұрын
Netherlands stripped out historically why wouldn't the plastic ones and now we pay so much more for vehicles with so much more plastic junk
@brotherhood_ofstreetracers4268
Ай бұрын
We’ve replaced 3 or 4 of these pans at pepboy’s if they are over tightened and you attempt an oil change it will pull the treads clean out with the bolt
@killer_agent1882
Ай бұрын
It’s a quick drain when it comes out
@peterpietrangelo7511
Ай бұрын
You need a smaller torque wrench they are less accurate when your at the bottom of the range
@tarunverma3296
Ай бұрын
They better bro trust me
@justinsmet
Ай бұрын
I mean with semis they use eith a plactic click style screw or they have a metal instert in the plastic pan with a metal bolt that most put a quick release on them
@scotcoon1186
Ай бұрын
In a fiberglass pan, not plastic. The 60 series started using fiberglass in the 80s.
@justinsmet
Ай бұрын
@@scotcoon1186 some are fiberglass and some are thermo plastic I've been working 4 years on them
@BigSchallz70
Ай бұрын
Sell the customer a drain valve from UPR
@kylelanda8962
Ай бұрын
What kind if car?
@mattthemechanic3996
Ай бұрын
I think oil changes are for lube techs that's what I think. Unless the oil change was sold on a bigger ticket you are wasting your worth doing them. I've seen what you can do in some of your videos and the oil changes definitely need to go to the techs lower on the totem pole.
@JackStotz
Ай бұрын
Just suck it out from up top when I worked at Valvoline we’d never touch those oil pans
@JosePerez-zt8si
Ай бұрын
Next would be 3d printed piston!!!
@dariush3587
Ай бұрын
If you buy a vehicle with this... Whatever happens is YOUR fault.
@gh05tsighs13
Ай бұрын
EZ oil drain valve. Get one
@ZoruaZorroark
Ай бұрын
and here i was, at first thinking it was a waffle patterned ALUMINUM oil pan, till i heard plastic
@keylanking8014
Ай бұрын
All new bmws have plastic pans and plastic drain plugs
@Drewdayz2419
Ай бұрын
Shit replaced once with a metal pan
@thesexican1313
Ай бұрын
Is that a q50?
@jacobpoucher
Ай бұрын
Job security boyy
@FluffyMexicanik
Ай бұрын
Lol not if it happens on my watch 🫣
@jacobpoucher
Ай бұрын
@@FluffyMexicanik heh, I think you got the wrong attitude for a stealership "tech"
@FluffyMexicanik
Ай бұрын
@@jacobpoucher i apologize that i still have a soft spot 😅🤣
@angelaldacoaa
Ай бұрын
What do i think???? I THINK THEY SHOULDNT BE PLASTIC IS WHAT I THINK! stupid manufactures tryna save money cant even blame the engineer for that one.
@brianwilt1113
Ай бұрын
8 pans 1 shop 1st service 1 st oil change now we extract it
@JohnSmith-pl2bk
Ай бұрын
So did the shop claim under warranty????
@stevenfarley6909
Ай бұрын
Vw and Audi use a plastic pan with a plastic drain plug. That makes sense
@alexandergunaka666
Ай бұрын
Those are getting evacuated from the top though.
@stevenfarley6909
Ай бұрын
@@alexandergunaka666 only lazy and annoying people do that
@alexandergunaka666
Ай бұрын
@@stevenfarley6909 Really? They’re literally made to be done that way? Keep complaining about the pan you don’t need to touch then.
@stevenfarley6909
Ай бұрын
@@alexandergunaka666 If you were a tech you would know that sucking it out is loud and the guys that do that don’t inspect the car
@alexandergunaka666
Ай бұрын
@@stevenfarley6909 What do you mean loud? You obviously have someone using a a machine that uses air and don’t turn off the air once the siphon starts. Also, what does not removing a drain plug have to do with inspection. You have things to learn.
@j-bob_oreo
Ай бұрын
put a petcock in it
@romanrebisz4205
Ай бұрын
What car is that
@timg2088
Ай бұрын
Probably a Nissan or a VW
@wolfseek
Ай бұрын
I dont toq them i just snug it and then go 1/2 after that
Пікірлер: 97