Great informative video...no acting no bullshit. Straight to the point. beatiful guns and 1of my favorite gun channels. keep it up..
@Icarryone
7 жыл бұрын
Thanks - I actually do try.
@ryanphilliesphan
4 жыл бұрын
No bullshit video. Like it! Well done.
@Icarryone
4 жыл бұрын
👍😎
@roughroosterknifesharpenin5531
3 жыл бұрын
Loved the video!!
@Icarryone
3 жыл бұрын
Thank you!!
@stephen9869
7 жыл бұрын
Looks sweet! Love the way the the holes in the barrel line up with the slits in the topslide
@Icarryone
7 жыл бұрын
Sweet indeed.
@Mr45Bullitt
7 жыл бұрын
Beautiful!! I must find one!!
@aloyalblue1
5 жыл бұрын
Excellent video! Thank you for sharing it with us all!
@Icarryone
5 жыл бұрын
My pleasure.
@NOTSOSLIMJIM
4 жыл бұрын
That Hillary joke totally took me off guard.
@Icarryone
4 жыл бұрын
That wasn't a joke!
@NOTSOSLIMJIM
4 жыл бұрын
@@Icarryone lol, I believe you. Nice video FYI. I do this to all my pistols as well.
@antouab221
7 жыл бұрын
This video is priceless in terms of improving performance of any 1911 and this OCD concept could be used literally on all pistols in existence today. On a shopping mission to buy dremmel tool and mother's aluminum polish. Man, your contribution to this type of knowledge is priceless, wish I could save some of your videos onto my computer but I don't know how to do it...Thx brother.
@Icarryone
7 жыл бұрын
If you hit the "LIKE" button on the video it will automatically save it to your liked videos file for later reference.
@antouab221
7 жыл бұрын
I always do, however, in case of shtf scenario when there is no internet anymore, would be nice to have some of these videos saved on a computer without depending on the availability of internet service. Cheers
@bandccoresohio
7 жыл бұрын
Antoua B thats not how it works
@cchomesteadfarm4064
6 жыл бұрын
Really enjoy your videos. Thanks for the information and sharing your knowledge.
@Icarryone
6 жыл бұрын
My pleasure.
@icebergo6
5 жыл бұрын
Those grips looks amazing
@Icarryone
5 жыл бұрын
Thank you
@wadel6
7 жыл бұрын
Great information sir , I have a few pistols that will greatly benefit from it . Thanks !
@Icarryone
7 жыл бұрын
That's only, If you can trust an old retired master machinist with a metallurgical degree.
@dynamicduck8777
7 жыл бұрын
Excellent video. I have always done my polishing starting with the green compound. I use blue jeweler's polish to finish and I have had excellent results. It's basically the equivalent of the Mother's you are using in the video. There's just something very satisfying about the end result after wiping the compound away, that extremely slick surface almost feels soft (to me) in a way.
@Icarryone
7 жыл бұрын
It's worth the effort - and it definitely increases reliability.
@BATJACJW
7 жыл бұрын
Very good info Daddy.
@Icarryone
7 жыл бұрын
Couldn't stand it - had to be done!
@harveygussow8852
7 жыл бұрын
Thanks for the method of polishing I never got it right with the red rouge polishing compound. That seems to make a difference.
@Icarryone
7 жыл бұрын
If you use the right stuff - you get the right results.
@jerrshobe6765
5 жыл бұрын
Thanks for making this video
@Icarryone
5 жыл бұрын
My pleasure Jerr.
@ED-988
7 жыл бұрын
Great video!!! I would love some before/after pictures from this works.
@Icarryone
7 жыл бұрын
Sorry no still photos but it did come out rather nice, if I say so myself. Thanks for watching!
@cirvi17
Жыл бұрын
After just watching your update video about this pistol, I say let your wife keep the old grips.
@germasilverback187
7 жыл бұрын
Only thing that keeps me from the 1911's are the squire safety on the handle. Great video though and love your ways. Keep it up.
@Icarryone
7 жыл бұрын
It depresses out of the way the minute you grip it - you wouldn't even know it was there.
@germasilverback187
7 жыл бұрын
Icarryone Ok then. I just might pick this over the Glock 10 g40 gen 4. What do you fee like? I've had the H&K USP 45 full size. It was a beast but 10 MM seems way better from the stats.
@germasilverback187
7 жыл бұрын
This Handgun looks beautiful by the way.
@gtoexpress8111
6 жыл бұрын
Good video i do mine by hand and i do the entire gun steel/aluminum/metal that I can polish inside the weapon nothing like a good feeding/cycling weapon with no issues!!!
@Icarryone
6 жыл бұрын
It's not hard to do and it definitely helps.
@stevehughey2247
7 жыл бұрын
This is the clearest best focused video on slicking up those vital contact points that often cause malfunctions especially with hollow point bullets! Most all semi auto handguns bought new can use some polishing to enhance feeding various rounds...I commend you Mr. One keep the high quality gun porn videos coming...no pun intended... 10mm damn right...
@Icarryone
7 жыл бұрын
I don't know of too many handguns that couldn't use an improvement or two.
@454pakr
7 жыл бұрын
Thanks!
@Icarryone
7 жыл бұрын
You're quite welcome.
@edwinsantos9537
4 жыл бұрын
Thanks for the insight!
@Icarryone
4 жыл бұрын
My pleasure Edwin.
@edwinsantos9537
4 жыл бұрын
I purchased the Iver Johnson Eagle XL-10 Ported last weekend and got it a couple of days ago; my first 1911 ever! I wasn't sure what to expect since I had never shot a 10mm before. However, just as you said, the recoil was not bad at all due to the ported barrel and slide. I had a lot of fun. Now, the one thing I noticed was that within just a few rounds the front sight was covered with gun powder and I had to clean it often just to be able to see it. Any recommendations?
@Icarryone
4 жыл бұрын
@@edwinsantos9537 A lot of that has to do with the gunpowder certain manufactures use. Some brands of ammo just burn cleaner than others. I almost exclusively fire my own reloads - loaded with some of the cleaner burning gunpowder's on the market. I also carry some wet-wipe packets in my range bag just in case.
@edwinsantos9537
4 жыл бұрын
Icarryone That sounds like a great idea, thanks!
@edwinsantos9537
4 жыл бұрын
One more thing, I’m having problems finding a leather side holster for it. Anything out there in my area is for up to a 5-inch pistol. Any recommendations?
@erichirst2766
3 жыл бұрын
I’ve definitely learned a few things from watching your videos. Actually have a few questions in regards to your Iver Johnson Eagle XL in 10mm. What holster do you use for the 6inch 1911? Love your videos and channel, keep up the awesome work.
@Icarryone
3 жыл бұрын
I use a shoulder rig for this 1911.
@doncaruso1949
7 жыл бұрын
I just ordered the non ported version of this pistol from Buds gun shop.
@Icarryone
7 жыл бұрын
Depending on the 10mm ammo you choose to shoot, you might have to upgrade the recoil spring to handle the hotter loaded brands of ammunition.
@colddeadhand7414
4 ай бұрын
What holster are you using for this pistol? I have one after watching your reviews of it. I think I'd like to do a chest rig, any recommendations would be greatly appreciated!
@GavatronX9
5 жыл бұрын
Wow, thanks for this video. It makes me want to buy this Iver even more! What are some other easy mods can one do?
@Icarryone
5 жыл бұрын
This one has also had the feed rails polished and gone through a trigger job. Then again, a trigger job on a 1911 does require a bit of training and the correct tools / stones.
@tc300mag1
6 жыл бұрын
How is this holding up in the long run .. since it doesn't have a ramped barrel how does it do with Full power loads like underwood or reloads .. i know the delta elites don't like a heavy diet of them
@Icarryone
6 жыл бұрын
So far, no issues.
@jammbbs1688
4 жыл бұрын
I have my grandfather's pistol he was issued in ww2 its a colt 1911 chambered in. 38 super its got ALOT of weathering on it but runs like day one
@Icarryone
4 жыл бұрын
👍🤠
@TSPhotoAtlanta
5 жыл бұрын
I was expecting to se a bit of a teardown with action polish, especially in areas on the hammer and trigger. I’m sure someone has posted that!
@Icarryone
5 жыл бұрын
There should be a number of videos that illustrate that procedure.
@gtoexpress8111
3 жыл бұрын
Great video again by the master of firearms - Question i got a EAA WITNESS 10mm Tuesday nice shooter - Looking at buying the Ivory Johnson 10mm with the ported barrel with the six inches barrel and do some upgrading to it - Would you recommend. This model ???
@Icarryone
3 жыл бұрын
Absolutely!
@willyb5017
3 жыл бұрын
Great video! Thank you. But I must say, the whole time, I felt like I was watching one of those Jimminy Cricket cartoons that is narrated. You just have that voice! lol. Awesome!
@Icarryone
3 жыл бұрын
Thank you.
@MrMacsagitarius
6 жыл бұрын
I have a question: Based on your own experience, you'd say that shooting 10mm with a 6" barrel it has less recoil that a 5" barrel?
@Icarryone
6 жыл бұрын
That mostly depends on the design. Handguns with a low bore axis will generally produce less felt recoil than other designs.
@granddad-mv5ef
5 жыл бұрын
I don't know how to do this any other way,so-realization has set in that I need a 9mm 1911. Used only for paper and steel (at my club), I would like it to be stainless steel and up to $1000. Please give me your advice on what to buy.
@Icarryone
5 жыл бұрын
Consider the Ruger SR1911 in 9mm - my brother has one and loves it.
@granddad-mv5ef
5 жыл бұрын
That is a great suggestion, it will look good next to my 10mm Target SR!
@granddad-mv5ef
5 жыл бұрын
Thank you!
@sthcope4638
7 жыл бұрын
how many rounds have you put threw it Eagle XL and also have you encountered any characteristic quarks/problems? Im looking into buying one and im trying to make the decision ppl are always shying me away from the idea since its a Philippines produced gun. how does it compare to other 1911's? say springfield?
@Icarryone
7 жыл бұрын
Let me answer your questions this way; I don't review firearms that are problematic and not worth owning.
@sthcope4638
7 жыл бұрын
Fair enough then it looks like a good gun for me to get my hands on Thanks.
@JKCullens
7 жыл бұрын
this was great. do you think we could see a polishing of the trigger bow on the cz clones?
@Icarryone
7 жыл бұрын
I did mod and install a stainless CZ trigger in my Shark FC - but it came already polished.
@JKCullens
7 жыл бұрын
what it fit no problem? that's why I have been hesitant on getting a Jericho because there is no aftermarket support and the thing I would want to do most with that one is the short reset trigger kit, hammer and spring kit to have the "reliability" improved for want to use it concealed carry. their 3.8 in that's a compact with 10+1 of 45
@Icarryone
7 жыл бұрын
It wasn't exactly a "drop in" fit, it took a little filing and stoning to get it to fit correctly. As far as short reach triggers and spring kits go, the ones Wilson Combat sells sure make a big difference in my Beretta's.
@JKCullens
7 жыл бұрын
yeah the kit for the CZ pistols by Cajun gunworks are insane the double action pull is about 6.5-7 pounds and if the fairies work their magic the single action can be sub 3 but they tune it to 3-3.5 and they can get the total trigger movement for single action to 1.5 mm and that's insane.
@weedXD38
6 жыл бұрын
She's a beauty, very refined n 10mm , 1911 my favorite.sidearm we where issue 1911 colt 45 cal.. Semper Fi.
@Icarryone
6 жыл бұрын
Excellent shooter too.
@Precursor0
4 жыл бұрын
Does someone know where the music from the beginning is from ?
@Icarryone
4 жыл бұрын
Kevin MacLeod ~ Neo Western
@gunsodin5299
5 жыл бұрын
Is iver Johnson's rare or no longer in production??? Because I missed out on an iver johnson gi 1911 and now im seeing the carbine one that you showed. Id rather have that colt iv had my eye on then yhe metro arms amd ati 1911s but I also dont want to grow old wishing id bought a rare gun.
@Icarryone
5 жыл бұрын
I see that Bud's Gun Shop still has them in stock. www.budsgunshop.com/catalog/product_info.php/products_id/719008346/IVER+JOHNSON+EAGLE+XL+PORTED
@harrycallahan692
7 жыл бұрын
How do feel about the 1911 Chambered for the .357 Magnum Cartridge? The Coonan 1911 as an example. I've watched many videos and read many forums how both the 10mm and .357 magnum do not feed well in the 1911 platform?
@Icarryone
7 жыл бұрын
Yes, rimmed cartridges like the .357 occasionally have problems feeding in semi-autos. The 10mm is a rimless cartridge specifically designed to work in semi-autos. Take what you hear on the forum's with a large dose of salt Harry. Most of those guys do not even own the firearms they love to rattle on about.
@harrycallahan692
7 жыл бұрын
I must admit you do have an unwavering commitment to the 1911 and the 10mm. I do own several 1911's. I would like more of them like that Rock Island Armory in 10mm. But since I reside in a non free State of the Peoples' Republic of California the Oligarch here wants all of my firearms.
@virgilwarren2597
7 жыл бұрын
I was looking into the stainless version of this. How has it fed for you and how many total rounds do you have through it so far?
@Icarryone
7 жыл бұрын
Shoots great. Has quite a few rounds through it - never counted.
@harrycallahan692
7 жыл бұрын
Do you have any opinion about Titanium firing pins? Is that a modification in performance enhancement? It seems changing the firing pin would be an easy modification?
@Icarryone
7 жыл бұрын
There's really no reason to change out a firing pin that isn't worn or broken. There's an old adage, "If it's not broken - don't fix it!" If it is broken, by all means replace it with whatever you like.
@markpotter2485
4 жыл бұрын
One little hint. Use more light. Black in black on black means I can't see Shiite! ;)
@Icarryone
4 жыл бұрын
Doing the best I can with the equipment I have - but I am open to accepting donations for better lighting. Care to contribute Mr. Potter?
@chrishelms1967
4 жыл бұрын
Ive done this to all my 1911s.......
@Icarryone
4 жыл бұрын
👍😎
@MrSuperklassy
7 жыл бұрын
are these stock grips? where can I find them?
@Icarryone
7 жыл бұрын
My wife found these grips on EBay.
@scorch2020
5 жыл бұрын
This guys funny 😂
@Icarryone
5 жыл бұрын
😎👍
@chrism4008
3 жыл бұрын
How am i the first person to like this video?!?! Great video!
@Icarryone
3 жыл бұрын
Good question!
@takodavankirk5711
4 жыл бұрын
"At leased the voice doesn't say i should go around setting Hillary supporters on fire". That sir made me laugh hard! Beautiful finish by the way!
@Icarryone
4 жыл бұрын
The voices party all night long. Hard to get any sleep. 😳
@takodavankirk5711
4 жыл бұрын
Pretty hard for anyone like us to get sleep these days... i love those barrel ports, i watched your other video on them, but would you recomend trying to do them yourself?
@JoeyCuz
7 жыл бұрын
Those voices my have been in your head but for me that's the wife saying it. Now I know why you like that round.
@Icarryone
7 жыл бұрын
Whenever I'm awake, I get my share of that too.
@citizen_or_civilian
5 жыл бұрын
*Why are the amount of likes and dislikes not visible for this video??*
@Icarryone
5 жыл бұрын
I haven't a clue.
@ebomey
7 жыл бұрын
This what I do to all my pistols .... send it it and I will check your work ....
@Icarryone
7 жыл бұрын
It's my firm belief that a proctologist should never be allowed to perform dental exams.
@ebomey
7 жыл бұрын
I don't think you're helping right now ... :-)
@Icarryone
7 жыл бұрын
Ha!
@marbearcat1749
2 жыл бұрын
I appreciate this video but I have to say, this kind up maintainance shouldn't be required for a brand new gun. I've tried wilson combat, sig sauer and other mags but can not get this gun to fire completely through 1 magazine without jamming. It wont even load up the first round without jamming. This is an awful gun!!! Speaking about my Eagle XL 10 mm.
@Icarryone
2 жыл бұрын
My Eagle XL doesn't have those issues. Other than that, I really don't know what to tell you.
@chrishelms1967
5 жыл бұрын
Setting Hillary Supporters on fire .......🤣🤣🤣🤣🤣
@Icarryone
5 жыл бұрын
Just a thought.
@SlingSalsa
4 жыл бұрын
@@Icarryone nothing unfortunate about that...
@JuggaloCujo
3 жыл бұрын
The voices in my head tell me to set Hillary supporters on fire. Loved your video. Thank you
@Icarryone
3 жыл бұрын
Glad you enjoyed it
@cetinyesilyurt7780
5 жыл бұрын
1911 kotu bir tabanca
@Icarryone
5 жыл бұрын
Evet öyle.
@superultramegamaga4021
5 жыл бұрын
9:45😂😂❤🖒
@Icarryone
5 жыл бұрын
Wishful thinking I suppose.
@superultramegamaga4021
5 жыл бұрын
@@Icarryone #maga!! 😎
@superultramegamaga4021
5 жыл бұрын
@@Icarryone sir, have no fear. Patriots are on it. kzitem.info/news/bejne/rIybqn-rgYJ1fm0 please view that. AND know the deep state is burning. You will see arrests and prosecutions soon!! #patriotsFight
@jasonrhodes10000
7 жыл бұрын
But you should go around setting Hillary supporters on fire.
@Icarryone
7 жыл бұрын
I wish.
@jasonrhodes10000
7 жыл бұрын
They are probably such devils they would enjoy the heat.
@paulmarvin2675
5 жыл бұрын
Great informative video. I hope ya'all are happy with your choice of presidents.
Пікірлер: 145