Does the digital gauge tells us anything more than the pressure? Seems like if it is low, fill it. If it is correct or high, you have another problem.
@andrewcpham
2 жыл бұрын
I just completed my recharge with the AC Pro but I have 1/3 left in bottle. Should I remove the valve b4 storing? Will the bottle auto seal after I remove the valve?
@How2Wrench
2 жыл бұрын
That’s a great question for Shane directly! We are just the social media team. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: kzitem.info/rock/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "KZitem Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
@qaz111111qaz111111
Жыл бұрын
yes, in a word.
@leebrowwski
3 жыл бұрын
Thanks a million. I owe you a beer! CLICK -BINGGGGG (SUBSCRIBED)
@How2Wrench
3 жыл бұрын
You rock....Awesome and thanks for commenting! Can you share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzitem.info/rock/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@denniscasey986
3 жыл бұрын
"This thing is just blownen hot air" just like kamila.
@donnavalin-reyes7242
2 жыл бұрын
How long does it take to recharge? I was charging 20 min and still in the same pressure. Pressing 15 seconds
@yhyaalree6661
2 жыл бұрын
I have a question, I have the one with the blue Ac pro , the temperature is 40c and above. When I measure it, it is above 60 or 70 PSI, is it normal?
@qaz111111qaz111111
Жыл бұрын
I have been reading and watching the videos before trying this. I understand that over pressurizing the system will prevent it from working. There is a high side and low side. you are adding refrigerant, and pressure to the low side. The compressor pressurizes the refrigerant and heats it in the process. Then it goes through the condenser to cool. This high pressure refrigerant then goes to the expansion valve. When the gas expands and the pressure drops, it gets very cold. This is where it goes through the evaporator and you blow air through to get A/C cold air in the car (or house too) So, if the low side is over pressurinzed then the gas cannot expand and it will not get cold. This is why you do not want too much pressure on the low side.
@IDK.312
Жыл бұрын
The digital keeps giving me false readying the analog was way better
@How2Wrench
Жыл бұрын
We did have a bad can too and when we went back to the store, Every can on the shelf also had signs of physical damage. We went to another store to get a can it worked fine. Learned a lesson that day to check all the cans on the shelf in case of careless shipping damage. Thanks for adding your experience. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzitem.info/rock/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZitem Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@ericlopez2506
21 күн бұрын
Thanks buddy worked!!!
@How2Wrench
20 күн бұрын
You're welcome! Tips welcome 🤗 We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzitem.info/rock/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZitem Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Пікірлер: 17