I'll give you one tip for this one. Please use the PVC cement glue for gluing the Valves. Also, upper valve is not really needed, Just connecting pipe glued with CPVC glue going in from top.
@nismomaniak
3 жыл бұрын
Great video! You're very handy.
@fishtorque1125
3 жыл бұрын
Thankyou ☺
@AniruddhaTalange
3 жыл бұрын
Whats the name of that pump can u please tell me? I am from India
@kb1Legendflaco
Ай бұрын
where did you get the pump from?
@timariums1620
4 жыл бұрын
Awesome diy build mate 🙌
@fishtorque1125
4 жыл бұрын
Thankyou Tim
@andicookson
3 жыл бұрын
I have been thinking of doing a vid like that lol its great.. Ill use a bigger container but love it.. Ahhh get an ada sticker to make it original
@RogerG92
3 жыл бұрын
chihiros just made a filter that is an exact copy of the ada one. for like one third the price. if this doesn't work deff check em out
@andicookson
3 жыл бұрын
@@RogerG92 im going to search now lol and put a ada sticker on it hahaha
@RogerG92
3 жыл бұрын
@@andicookson I just found one for 90 bucks online lol.
@fishtorque1125
3 жыл бұрын
Let me know how it goes
@roadtrip5643
3 жыл бұрын
thanks mate.
@williamrichardgutierrezapa7915
9 ай бұрын
De que tamaño tiene que ser el contenedor para 100 litros de agua para mi acuario
@superjaz1810
3 жыл бұрын
Great DIY, thanks! Have you had any issues so far? I made a plastic version about a year ago and it's been working well but I'm getting all the bits together to make one of these for a new 20l tank. The ADA style is much nicer :)
@fishtorque1125
3 жыл бұрын
Hi mate glad you liked the video. No I haven't at all only thing I'd say is the pump rather noisy but it might just be the brand
@superjaz1810
3 жыл бұрын
@@fishtorque1125 hmm odd, I've got the exact same pump and it's really quiet. I can hardly hear it. When I first start the pump, I get a rush of air for about 20 seconds and then it's pretty silent after that 🤔
@fishtorque1125
3 жыл бұрын
@@superjaz1810 do you have the link to the pump you used I'd be really interested to try it out
@superjaz1810
3 жыл бұрын
@@fishtorque1125 Yeah, I bought a couple off eBay and they look identical to yours. I made one modification also since my last message because I started to get some air inside the canister (which made it a little noisier) and when the pump was switched off, after about 5 minutes or so the pressure inside the canister would cause it to slowly leak around the rim. I bought an o ring and applied some silicone grease to create a tighter seal, links below: www.ebay.co.uk/itm/Decdeal-Ultra-quiet-USB-DC5V-4-8W-300L-H-Brushless-Water-Pump-Waterproof-K8E5-/363095106342?_trksid=p2349624.m46890.l49292 sourcingmap Silicone O-Ring, 75mm... www.amazon.co.uk/dp/B07CVJMDRF?ref=ppx_pop_mob_ap_share
@mentlegentlemen7409
3 жыл бұрын
Bro, I just made something with also the exact same things, even the same pump and Isosteel container. I used a insulated Jar from my local Walmart
@mentlegentlemen7409
3 жыл бұрын
I was even thinking to silicone the hole too 😂. I was missing the teflon tape but dang is this incredible similar.
@fishtorque1125
3 жыл бұрын
😂 How are you finding it?
@mrgreenfingers86
3 жыл бұрын
Thank you :)
@fishtorque1125
3 жыл бұрын
My pleasure another diy build coming this week!
@estebanhernandez4394
2 жыл бұрын
Next time use gravity to help with the inlet then have the outlet pump out from the bottom up. The pressure that builds causes joints to leak. Picture drinking from a straw u drink from the bottom of the cup.
@zurichscorpian
2 ай бұрын
Ur right tested multiple times with such dc brushless pump at the top but got failed while at the bottom the pump was doing better
@stomakinos
3 жыл бұрын
Incredible!!! Where did you buy this Thermo?
@fishtorque1125
3 жыл бұрын
From IKEA
@MaceWinduDuHuen
3 жыл бұрын
can you tell me why you diodnt just do away with one of the two lids and kept on using it?
@fishtorque1125
3 жыл бұрын
Because the top one didn't have a vacuum seal and the other one looked odd
Пікірлер: 31