Man best carpeting video ive seen with great tips.. Im getting ready to carpet a 1992 Skeeter bass boat and this really helps. Thanks
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Thanks so much man, glad it helped 👊
@mr.mikesullivan3685
2 жыл бұрын
@@AnthonyJonesBrigadeBoats yup... gives me the know how ... I subscribed to your channel.. great job
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Thanks man!
@paintballerj5575
2 жыл бұрын
Thank you thank you thank you! You are the first one I’ve stumbled across that actually tells people to lay everything out the same direction. Looks like you do great work. Coming from someone that has done auto and marine carpet and upholstery for 17+ years, I have a suggestion on some glue you can try that would streamline the process so much more. I use weldwood contact adhesive as well, but I use the landau top and trim spray grade adhesive, in my experience it is much better than a brush on glue because you can spray it and after about a minute stick it down without so much of a mess, plus it allows for a much more even coverage. It is a little bit pricier but you can spray it out of a standard gravity fed paint gun. Also, I know this will be a controversial topic, but you honestly do not need to strip every ounce of old glue off. The way I see it, if after a sharp scraper and a brush goes over it and smooths it out and there is still some left, than that glue is not coming off any time soon, and it will not affect how the carpet adhesive sticks to a lid or floor. Just my two cents, I know a lot of people will hate on it, but I always try and help out with advice when I can.
@kewlboss
2 жыл бұрын
Thanks! This showed me everything I did wrong laying carpet in my boat. I feel much better knowing how I screwed up just about every part of the process. 🤔
@user-gd1wl8yd5j
3 ай бұрын
I have a pro craft 180 combo that I bought carpet for about 10 yrs ago. I'm intimidated every time I look at it. After watching this video maybe now I can start on it. Thanks for making Video for us.
@noahwiggins8746
2 ай бұрын
DO IT
@prayertool
Ай бұрын
I love watching a perfectionist / artist. Thank you for an excellent video
@mennowzer4164
Жыл бұрын
I have this exact boat and I just got my carpet from Amazon yesterday. I have contact cement and an exterior carpet. I replaced the floor with a sheet of aluminum and put a skin of aluminum over the plywood on the deck. I am adding some lighting and will build out the deck. Wish me luck! This video has been instrumental in my rebuilding my boat. Many years with my kids…..thanks
@SwiftyShammy
2 жыл бұрын
This is by far the best video I have ever seen and was EXACTLY what I was looking for! Thank you.
@tedknight2243
11 ай бұрын
Anthony I have to say that I was thoroughly impressed with your carpet video as well as the complete rebuild video of this bass tracker. Your attention to detail is above and beyond! I started a couple days ago with a 1997 bass tracker Tournament TX 17 that I've had for several years now, planning on a quick job of replacing carpet and not worrying alot about how well it turned out. Your videos have inspired me immensely. I can't begin to thank you enough for the time and information you put into what is obviously a huge passion of yours. I will know doubt be revisiting your videos. I am doing some before pictures and hopefully some after pictures. Would love to share with you. Again the work you do is amazing! God Blessed you with real talent!
@jamesarchey5828
3 ай бұрын
Just got my first bass tracker. 18 Ft Pro Team Tracker. And of course it needed the decks and carpet all redone. Thanks for the tips and tricks buddy. I was a little puzzled by how I was going to do the deck lids and channels around those lids. But you made it look easy man and I can do just about anything so should be easy enough. Great tutorial man. Thanks so much for the great video and your ability to explain things. Cheers brother now go hit the water and enjoy.
@TheSilverSurfisher
Жыл бұрын
Thanks for teaching us the art of “Crankin that Yank” exquisitely Cuzzo!✊🏾😁😎
@AnthonyJonesBrigadeBoats
Жыл бұрын
Still crank that yank Soulja boy tell em
@TheSilverSurfisher
Жыл бұрын
@@AnthonyJonesBrigadeBoats 😅✊
@vb9300
2 жыл бұрын
Hey guy, I hope you are still beating your demons. Its been awhile since Ive been on your channel. Broke my back in 2 places along with a shattered pelvis, lots of surgeries. Glad to see you are building boats for folks now. Hope your family is doing good buddy, kids growing up fast, strong and healthy. I might be able to get back out on the water in 6 months...I hope. Enjoy life my friend, it can be cut short in a instant. Tight lines.
@newmysticvegeta4life
2 жыл бұрын
Nice man! exceptional work. I'm going a re-carpet on my dad's boat and your video is what i was looking for. I've never done a carpet install or anything like that on a boat. Thank you for this.
@cajunnathan4586
2 жыл бұрын
THANK YOU for being so Thorough and providing so many Details it Really Helps me to understand how to Install Carpet CORRECTLY
@chrisruef9221
8 ай бұрын
This video gives me the confidence to recarpet my 18' boat. Thanks for the detailed explanation
@davehaag8175
2 жыл бұрын
As always topnotch!!! Thanks for this, been waitin for it, now off to get mine done…thanks again!!!
@seantobin8547
7 ай бұрын
Bad ass job man. Thanks. Doing mine this week as long as the carpet and seats get here in the next couple days
@jbarrpa
2 жыл бұрын
Perfect timing for me on this, thanks for the detailed video. I watched this after carpeting my first 2 panels of a 16’ tracker so many to go. I was paying attention to laying out the carpet all north-south off the roll into the boat front back but didn’t pay attention to if I flipped a piece to south north...figured the grain was the same but your “50 shades of grey “ comments made me check and no doubt, even keeping the grain in line but flipping to south north is super visible so thanks again. I got lucky my 2 were ok but I had one ready to start that wasn’t! PS regarding the contact cement. If you want to speed up application on a good sized project I might suggest DAP Weldwood Landau top sprayable version over the red can original. You can spray it from a cheap $20 harbor freight gun. Goes on way faster, more evenly and has quicker flash off. I think it’s what the factories all use, always looks sprayed to me. As a former car audio shop owner I upholstered a lot there and we always used it, when starting ,my boat I called DAP to ask and they suggest it over red can for boats, they said it’s more foe auto and outdoors, red is for countertops etc but obviously does work. You won’t find it in stores but Amazon etc has it. Just a thought
Ай бұрын
Outstanding talent.
@AnthonyJonesBrigadeBoats
28 күн бұрын
Thank u
@richied3728
2 жыл бұрын
Best video on carpet I just did a bass tracker 17 came out so good. Followed your whole video awesome thank you
@chipsterblack7950
Жыл бұрын
You are a true master of your craft brother. Thanks for the vid!
@AnthonyJonesBrigadeBoats
Жыл бұрын
I appreciate that! Thanks so much
@ronmroczenski3562
4 ай бұрын
Great Video and Explanation of entire project. Keep up the great Videos!
@franknoblitt6265
2 жыл бұрын
Best boat carpet diy video out there. Thanks Cuz!
@AnthonyJonesBrigadeBoats
Жыл бұрын
Dude, much appreciated man!
@duaneg3242
2 жыл бұрын
I've been looking for this video foe awhile now. there's lots of videos but they all skip the little details like corners and folding etc. I have a old lund I bought and it's a mix of aluminum and wood and this video showed me everything for the carpeting. thanks so much. And man it looks good
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thanks so much, man. I'm very glad it was of use. A lot of work went into making the video, and it makes it worthwhile to hear positive feedback. Sorry for the delayed response. I appreciate the support.
@thomassater3462
2 жыл бұрын
Fantastic video, as always! I just completed my wood-decked project, using the same TEC adhesive and spreaders. It's great that it is water-cleanup (as long as it is still soft), because that can save minor mishaps. One thing I did to prevent fraying of cut-piece carpet edges is to use a hot knife to cut all my carpet parts. It's slower, but it seals the edges as you cut. With just a razor knife, it seemed that the carpet wanted to fray a bit when cut with the grain...and I used the same 20 oz carpet as you have on this project. One other tip...try a silver Sharpie when marking the back of the carpet -- they are amazing.
@cvh8149
2 жыл бұрын
Love your videos Anthony. I'm restoring a 1436 Jon boat and your information is extremely helpful. God bless.
@bobatbilletcreations
Жыл бұрын
Nice job and thanks for sharing, That looks like a brand new boat brother!
@billhardy3024
2 жыл бұрын
You have inspired me to re carper my Tracker Pro Team 175. Thank you
@williampalmer8008
2 жыл бұрын
What yr is yours? Mine is 06
@DRDROP-fj4bo
Жыл бұрын
Thanks man for the Pro tips and effort you put into making this video. Excellent work!
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thanks so much..Appreciate the comment!
@mikefedor78
Жыл бұрын
Thanks so much for sharing your knowledge 👍.. Best informative video on installing Bass boat carpet from A to Z !!!
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thanks for posting. Much appreciated!
@rookiehooksetslt3352
11 ай бұрын
Awesome Craftsmanship. Great video 👍
@AnthonyJonesBrigadeBoats
11 ай бұрын
Appreciate the feedback!
@garylcarrier
Жыл бұрын
Excellent video!!! Thank you for making a difficult job easier!
@AnthonyJonesBrigadeBoats
Жыл бұрын
No problem good luck with it buddy
@liquidsmokemustang1537
2 жыл бұрын
Awesome job brother!! Great tips and techniques. My Bass Tracker Pro Team 175 TXW needs this. Factory carpet just doesn’t last long.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Thanks man, appreciate it. Hopefully youcan rework yours.
@liquidsmokemustang1537
2 жыл бұрын
@@AnthonyJonesBrigadeBoats One thing I noticed on my boat and other how-to videos. The carpet on the hatch openings doesn’t wrap under the frame lip. It actually stops at the bottom of the vertical so the carpet wrapped under the hatch sits on bear aluminum. I suppose that is because there doesn’t need to be double thickness there. Just an FYI thing for ya.
@MealeyMarine
2 жыл бұрын
Learned a bunch of tips!
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Awesome, thanks!
@DRazz86
Жыл бұрын
Looks amazing great job!!!
@DARIOUSN
2 жыл бұрын
Damn!!!!! Best video on the net to date
@AnthonyJonesBrigadeBoats
2 жыл бұрын
I'll take it 👊
@frankduarte3239
6 ай бұрын
What a dang good video!! THANK YOU!
@AnthonyJonesBrigadeBoats
6 ай бұрын
Thanks for the feedback!
@chrisbeck2440
Жыл бұрын
Great job explaining very helpful
@AnthonyJonesBrigadeBoats
Жыл бұрын
no problem, thanks!
@TheRealIdleTime
2 жыл бұрын
Man you did a finominal jod! I really like the attention to detail. Great job.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Much appreciated! Thank you👊👊
@miltonbrown7275
2 жыл бұрын
You do excellent work
@christophercrowdis7308
10 ай бұрын
Awesome job learned alot.thank you.😊
@AnthonyJonesBrigadeBoats
10 ай бұрын
Glad it helped. Thanks for watching.
@Jackt-3
2 жыл бұрын
Great detailed video. Great job!
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Appreciate the kind words
@Funkyluv
2 жыл бұрын
Thank you for your craft I appreciate the art of carpeting and trim work. I have seen all I need to know. By the way, I will let you know how it turned out.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Thanks so much for positive feedback and please do 👊
@johnchappell5581
6 ай бұрын
Hello Sir do you have a video on how you did the inside of the compartments?
@edwardtukiendorf5666
Жыл бұрын
Now this was good. I never even thought of the front to back layout. I am in the process of doing a 16ft 96 Sylvan sea monster ( more like a sea Guppy really). I am trying to figure out the flooring. It sat for years. After we cleaned out 2 feet of leaves trash bags full of who knows what ...did find some used diapers as well. So clean out took days. Cut out the 20 wood panels and covers. They were in bad shape. But the sub floor was marine grade 1/2 inch plywood. It remarkably are in good shape. Washed it down and I am stumped. I am going to recarpet all the cut outs in 20 ounce marine carpet. But what to do with the floor. It's all riveted down. So I don't have panels to pull up and redo. Thought of going with Kiwigrip paint. But it won't look to good in my opinion. I guess I will have to pull out the driver's console so I have an open flat surface to work with. Any thing different you should do on the floor than the panels?
@AnthonyJonesBrigadeBoats
Жыл бұрын
Yes, I recommend Hydroturf or Sea Dek. It's eva foam material with 3m adhesive backing. I have been using it on some of my recent builds. I would not recommend getting an imitation product. Hydroturf or SeaDek
@timhall4154
2 жыл бұрын
you ever try 3m super 90 ,,,,i’ve had excellent results with that ...one of the larger cruiser boat factory’s is close to me and they have used 3m 90 for all of their boats forever
@AnthonyJonesBrigadeBoats
2 жыл бұрын
I haven't. But I will definitely look into it! Thank you for mentioning!
@jimball234
Жыл бұрын
Outstanding video
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thank you!
@davidhedges1
Жыл бұрын
Outstanding!
@AnthonyJonesBrigadeBoats
Жыл бұрын
thansks!!!
@blasthemi
11 ай бұрын
You’re awesome dude! Wish you would do my 2019 Bass Tracker 195 TXW! 🤙
@AnthonyJonesBrigadeBoats
11 ай бұрын
Thanks man, wish i had enough time to do everyone's boat!
@Vade1313
Жыл бұрын
Great vid, looks awesome !
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thank you! Cheers!
@Vade1313
Жыл бұрын
@@AnthonyJonesBrigadeBoats Can I use the contact cement on the wood if I use the fiberglass resin on it? You think it will hold?
@miked8227
Жыл бұрын
I would like to move two batteries up front by my trolling motor and would like to cut in a compartment for each on both sides of my pedestal seat. Where can I get the prefabricated hinged compartments. Yes I might as well re-carpet the rest of boat while I’m at it. Thanks in advance.
@elviastafford5931
2 жыл бұрын
Thank you this really helped
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Appreciate you 👊
@gethiggywitit7338
Жыл бұрын
Excellent video.
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thanks!!
@queretarofishing5316
2 жыл бұрын
Good job bro
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Appreciate it!!
@jayxxxx7876
Жыл бұрын
WOW! lots of great info. I am going to do a 1992 Basstracker Pro 17. almost the same boat as you have here. Only one question, how did you screw the wooden decks down and not have the screw heads showing?
@ericbranin9647
2 жыл бұрын
Awesome job and great video.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Appreciate it👊
@ericbranin9647
2 жыл бұрын
Have you ever tryed to pull the back casting decking off of a tracker? I have to do some work under there and was wondering if it was possible.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
It's possible. I haven't on a tracker yet but have on a Lowe
@wpmdwilson
2 жыл бұрын
Damn bro you do some bad ass work
@AnthonyJonesBrigadeBoats
Жыл бұрын
Thank you man
@usapatriot9940
2 жыл бұрын
Where did you find the center console shown at the end of the Tracker Boat Carpet video. Looks like a very nice center step.
@GeorgeT6566
Жыл бұрын
Dang this turned out great. I am about to do my 89 Ranger bass boat. I need all the help I can get.
@AnthonyJonesBrigadeBoats
Жыл бұрын
Here to help man! Lots of videos on my channel aimed solely to help you on your project!
@scottvan6064
2 жыл бұрын
Great video, thanks a learned a lot . any chance you making you way out to NJ ? it would make for a good video
@dankent50
Ай бұрын
Anthony ,after you recarpet the wooden deck how do you hide the screw heads so they don't show when you screw it down?
@dewoinepps3637
Жыл бұрын
What material would I need to do a 09 triton vt17
@Shadytreemechanic77
2 жыл бұрын
Exceptional job! What does a job like that cost a customer on a boat that size ?
@dennisharrison4744
2 жыл бұрын
I just did my 94 17ft xpress built all aluminum front deck extension found hatchs like my boat has on ebay i recarpeted it looks new now even carpet decals
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Nice!!!
@brettyou5393
Жыл бұрын
I've seen you apply marine carpet to aluminum, wood and fiberglass... my bass boat raised platforms are thick black plastic... what type (detail name of product adhesive) used to stick 20oz marine carpet to plastic platform. Your help would be greatly appreciated 😁
@craigmac1516
Жыл бұрын
11:35 i cried laughing !!!!! great vid plenty of good tips...
@AnthonyJonesBrigadeBoats
Жыл бұрын
Not gonna lie, had to go back and watch! No, we don't wanna be high as crap doing carpet work lol
@randallbracewell9226
Жыл бұрын
Where are you located? What is an estimated cost to recarpet a 16 foot bass tracker panfish boat? Thanks
@db9818
5 ай бұрын
What’s the gap used with 20oz carpet on a wood deck? Was it mentioned or did I miss that
@fat-fromage
2 жыл бұрын
I would like to know your opinion on the bassboat progator boat? thank you
@jimcarpenter3484
Жыл бұрын
Awesome video! Did you use the Platinum color?
@rockstarfan886
2 жыл бұрын
Hey sir have you ever tried the razor blades with the hooks on the ends? They work way better than regular razor blades and are designed specifically for cutting carpet. Great in depth video
@AnthonyJonesBrigadeBoats
2 жыл бұрын
I haven't. I have some actually but always used them for cutting roofing shingles. I'll give them a try. Thanks
@sbhcmcc
Жыл бұрын
My boat needs a recarpet bad but I don’t have the time. You wouldn’t happen to be in North Carolina would you?
@robertovaldez4747
Жыл бұрын
Badass bro...
@AnthonyJonesBrigadeBoats
Жыл бұрын
Appreciate it
@brockc13
Жыл бұрын
Do you do this for anybody or just certain people you know?
@4ReelAnglin
11 ай бұрын
Howdy, do you recommend 16oz or 20oz carpet for my bass boat? Thanks!
@PopPopJoe
2 жыл бұрын
Anthony, Have you ever glued rug or marine vinyl flooring to PVC sheeting. I used 3/4" PVC for my boat floor. Now I need to glue on flooring . What do you recommend for this application.
@seapimpnh.9307
Жыл бұрын
Where did you get the new screws and rivets for deck and hatch lid hinges ?
@elylesable
9 ай бұрын
If I did a carpet job as you have done here what would I need to charge? Do you have a price per foot of boat?
@HerbertAlexander-ud1ss
8 ай бұрын
I have the exact, what would cost to get my boat carpet replace?
@cutbaitkenny
Жыл бұрын
where are you located? I have an Alumacraft that needs new carpet.
@dennisharrison4744
2 жыл бұрын
Took 25ft of carpet all mine layed directional
@MrGattor33
2 ай бұрын
I need to know, did you put the hardener in the resin when you were doing your boards to better waterproof them?
@bobwatfprd2328
2 ай бұрын
of course he did....without the hardener it would remain gooey
@jacksonmatula7617
2 жыл бұрын
How much for something like this. Would love to send u my jon boat
@user-vb1lh2ws7d
Жыл бұрын
멋지네요 very nice video
@justbecause2000
Жыл бұрын
Hey I have the same boat and I am carpeting it. I ran into an issue when I used the same context cement that you do. The carpet is not sticking well is there anything that you could recommend I have already tried putting wood blocks to secure it better, but it still comes undone. Thanks
@bobwatfprd2328
Жыл бұрын
amazing video....very informative....thanks!!
@cdiddy1898
3 ай бұрын
What length of carpet do you order to completely recarpet a 17’ Tracker?
@AnthonyJonesBrigadeBoats
3 ай бұрын
I typically go ahead and get the 8ft by 30ft to account for verticals and inside comparts floor or walls. You should end up with a bit left over.
@davidasimkosr4641
9 ай бұрын
What thickness plywood do you use? Marine plywood or what kind??
@AnthonyJonesBrigadeBoats
9 ай бұрын
1/2 inch exterior grade
@user-vr9id6wx7f
3 ай бұрын
Great video on the techniques you use. The contact cement you’re using is labeled as water resistant, so I contact DAP. Their rep indicates that DAP does not have a recommended contact cement for marine applications. They referred me to 3M. Please confirm the product is OK.
@AnthonyJonesBrigadeBoats
3 ай бұрын
I as well as other shops I know of use the Dap and have had great success. I can attest of a few boats I used it on 3 years plus ago w no issues. If I were running a turn key carpet shop I'd use a specialty cement from a manufacturer like 3m and order it by the barrel. I'm still using the Dap as of now.
@zongyang6602
4 ай бұрын
How much is this job cost?
@kenolswfski2511
11 ай бұрын
How much carpet did that take and what would it cost to do a 18ft tracker jet boat
@AnthonyJonesBrigadeBoats
11 ай бұрын
It's in the video. I think 30 ft. I go over it in detail in the video. Don't know cost.
@lilaznpandabear91
2 жыл бұрын
My man, if you’re getting paid to do this, you’re a professional. Don’t sell yourself short.
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Thanks man!
@2000yamahar6
Жыл бұрын
Where do I get replacement plastic piece that the trolling motor plugs into mounted into the bow ?what would that be called?
@AnthonyJonesBrigadeBoats
Жыл бұрын
different ones on Amazon. try trolling motor plug/adapter
@atucker31887
Жыл бұрын
36:14 could you tell me where I might find a center console like that? I’d like to replace my center seat with one.
@kirbyspencer538
Жыл бұрын
Did you ever find it? I think I want one too, but haven't found anything even close yet.
@marcgurley9376
Жыл бұрын
What color is the carpet 11 platnium ?
@AnthonyJonesBrigadeBoats
Жыл бұрын
yes. Use code BRIGADE on the site and save 5% on your order
@brandoncarnes5520
Жыл бұрын
Just a fair warning everyone.. the weld wood glue is useless for rubber backed carpet. If you are folding corners and expecting it to hold, you better be using very light carpet.
@AnthonyJonesBrigadeBoats
Жыл бұрын
I've done many boats and use the heaviest marine backed 20oz carpet as demonstrated in the video. Weldwood contact cement works perfectly. You have to apply it to both surfaces and let it tack over before bonding them. Otherwise it will not hold. Not sure your issue but again me and many professional use it and it works great given proper prep, application technique and proper curing temperature.
@frankulissi3391
Жыл бұрын
I'm a subscriber and I'm having a problem installing carpet around the bezel & shifter on my tracker. Do you carpet around the throttle or remove the shifter all together ? I'm a little confused about how to do it... Thanking you in advance, Butch
@AnthonyJonesBrigadeBoats
Жыл бұрын
I typically remove whatever I can to carpet. The throttle control was removed in the boat in video to carpet the panel.
@charlesleveque8529
Жыл бұрын
I am a 30-year professional installer, I'm working on a bid for a bass boat, what is the average that you charge for an install?
@kyletrump8025
9 ай бұрын
What did you end up quoting?
@timcelesti5321
Жыл бұрын
Where did you get the storage bin between the seats ?
@AnthonyJonesBrigadeBoats
Жыл бұрын
Everything is linked in the video description
@JoseJimenez-qw6xz
2 жыл бұрын
Would this technique also work on a fiberglass bass boat?
@AnthonyJonesBrigadeBoats
2 жыл бұрын
Yes
@markcarpenter7682
2 жыл бұрын
I have a pro team 185 what width and length carpet do you suggest for recarpeting?
Пікірлер: 186