Rob, As with everything you do that is a First Class job. TP
@jacemusgrove3073
2 жыл бұрын
This trailer looks very nice! Like head-turner nice!
@johnevans7065
3 жыл бұрын
Would have liked to see the axel install. Also the beafing up of the tongue.
@MR619Can
3 жыл бұрын
wow that turned out awesome!!!
@akilthebarber
3 жыл бұрын
Wow, very clean work once again Rob!👌
@djjmsimon
3 жыл бұрын
That's a big build, props for knee current control
@BonifabcustomRobBonifacio
3 жыл бұрын
Thanks i can’t believe someone noticed 😁
@shortycummins
3 жыл бұрын
@@BonifabcustomRobBonifacio Youre the man , ive done my fair share of leaning my pedal up against a cinder block while doing something on the ground lol
@joebonem7727
2 жыл бұрын
Nice build. One thing though is the copper in the pressure treated lumber can galvanically corrode the aluminum. Happens all the time with aluminum pontoons on pressure treated bunks, even through bunk carpet.
@ramonsanjuanandres183
3 жыл бұрын
Hi Rob... as usual "devil is in details.." just a comment, use some MS polymer to seal the turning and break lights in order to avoid electric problems... safety the first.. This sealent beam protect interior of chassis and avoid future rust problems inside the plataform. And usually are fully repaintable with all paint availables in the market. BR.
@luclaw5263
2 жыл бұрын
How thick is that aluminum square tube are you using? What did you use as an insulator between the steel axles and aluminum to prevent corrosion? Thank you
@BonifabcustomRobBonifacio
2 жыл бұрын
Thanks the square tube is .125” wall and i put some thin puck board plastic between the axles and aluminum
@americanrambler4972
Жыл бұрын
Question: why did you install all the deck boards with the joint all butted together at the center instead of cutting and staggering them so the joints are not all located in one location? So instead of using all 8 foot boards, you would use a mix of 8’, 6’ and 10’ boards in order to stager the butt joints. It would make the deck look more seamless.
@BonifabcustomRobBonifacio
Жыл бұрын
I just used what i had , when I built this wood was at an all time high . Thanks
@americanrambler4972
Жыл бұрын
@@BonifabcustomRobBonifacio Works for me! I went to purchase some new cedar deck boards around that time and literally choked. I waited for a while until they came down to an almost tolerable price. My wallet still hurts.
@lillysfantasticworld7963
2 жыл бұрын
Hey, looks great and like the main frames out of 2x3 tube, wonder what gauge you used?
@BonifabcustomRobBonifacio
2 жыл бұрын
Main frames are 2x 4 and i use a .125” wall thickness thanks
@204orin
2 жыл бұрын
Awesome build! How much weight will it be able to haul with the three 2X4" eight wall beams?
@BonifabcustomRobBonifacio
2 жыл бұрын
Thanks I’ve had about 5000lbs in it so far
@santosbonilla2505
7 ай бұрын
What was the cost and man hour total
@allen5638
2 жыл бұрын
Make it look so easy. Let's see that tungsten ground at least once cause of a oops now and again! Lord knows the walkway to my grinders seen more then it's fair share of traffic to and from 🤦
@timme69680
Жыл бұрын
Where did you get that steel wire from? I have searched and can't seem to find it. Oh and I almost forgot that is a beautiful welding job, very nicely done!
@BonifabcustomRobBonifacio
Жыл бұрын
Thanks , what do you mean by steel wire ?
@timme69680
Жыл бұрын
@@BonifabcustomRobBonifacio the wiring you used for the lights? You called it Steel wire so assumed the bundle was enclosed in some kind of clear / wire mesh.
@BonifabcustomRobBonifacio
Жыл бұрын
@@timme69680 yes it’s a wiring incased in braided steel and plastic
@timme69680
Жыл бұрын
@@BonifabcustomRobBonifacio I was hoping to find out what brand it is or where you purchased it from. Looks like really good quality.
@BonifabcustomRobBonifacio
Жыл бұрын
@@timme69680 there actually cut off from some type of garage opener motor got a bunch from a friend a few years back and I’m running out unfortunately
@MrLevilawrence
Жыл бұрын
how much would this be able to handle in weight? I need to carry a 3800kg Machine
@BonifabcustomRobBonifacio
Жыл бұрын
It can have 2200kgs
@juvrajsingh9252
3 жыл бұрын
What can't you make?😂
@jackwells1452
2 жыл бұрын
The only part I wanted to see was the axle install 🤨
@BonifabcustomRobBonifacio
2 жыл бұрын
Sorry i didn’t show much on that
@jackwells1452
2 жыл бұрын
@@BonifabcustomRobBonifacio No worries Sir, fantastic job
Пікірлер: 37