I hope you enjoyed this video and learned something new! If you'd like to support me making more content like this, please consider supporting me on Patreon: www.patreon.com/howtomechatronics
@HELLSGUARDIAN
3 жыл бұрын
Can I use nrf24L01+pa+lna instead of only nrf24L01 (receiver part I already built the transmitter using nrf24L01+pa+lna)?
@HELLSGUARDIAN
3 жыл бұрын
Can I use Arduino nano instead of pro mini?
@TheEmirMe
2 жыл бұрын
I would like to buy this as a kit :)
@FliteTest
4 жыл бұрын
Hey Dan! Love the how to's bud! Keep up the great work! ;) Cheers !
@HowToMechatronics
4 жыл бұрын
Hey, thanks! I've learned a lot from you about RC planes. Thanks for that too! 😊
@wheelsonhills6461
4 жыл бұрын
Hey guys im fan and subscriber of you both i love both of your work . I've learned so many thing's froum your videos
@wheelsonhills6461
4 жыл бұрын
Hey can we have a Quadcopter build video with this controller😍😍
@amolgore9428
4 жыл бұрын
Hats off for both of you genius. Flite test and mechatronics. I am non tech but you both changed my interest. Learning from you videos.
@tharun_jadhav
3 жыл бұрын
@@HowToMechatronics hi Dan can use a Arduino pro micro to make a realy simple 4ch transmitter and receiver for rc car and also try to control the car with a phone.and make it realy compact.and also try to control it with a smart phone ❤️🤗🙂. thanks alot for these projects they realy help me to learn alot.and LOTS OF LOVE FROM INDIA.❤️
@vondarycrentsil9180
4 жыл бұрын
I have been looking for something like this for a year now ,and this it the right one, thanks alot. Best diy receiver ever
@0xB8xor0xFF
4 жыл бұрын
If you are interested in DIY remotes, look up TheDIYGuy999's Micro RC.
@MirkoPavleskiMK
4 жыл бұрын
I'm really proud of this Macedonian boy. Best projects and tutorials. Congratulations
@alistairfurnell126
4 жыл бұрын
oh man an other top site to goto, betwen you and dronebot workshop what is a guy to do so much to look at well done man
@awakening705
4 жыл бұрын
I was waiting for this receiver from a very long time :)
@ericlotze7724
4 жыл бұрын
Can you make some sort of "Radio Ping" device for finding lost drones etc, using manual signal finding methods?
@ericlotze7724
4 жыл бұрын
Probably a signal every ~1-5 secconds. Need to find what frequency to use. No need for data etc, just a precise "ping". Also perferabbly 100m or so range.
@rithickguru1561
4 жыл бұрын
Very long gap brother I was waiting for ur videos
@marhar2
4 жыл бұрын
Every video is both educational and entertaining. I learn something new every time!
@HowToMechatronics
4 жыл бұрын
Glad to hear it, thanks!
@alpsakarya3054
4 жыл бұрын
What is the range?
@user-random-1
26 күн бұрын
Works perfectly in 700 m, but you can use it up to 1 km if you want to
@mklaver31
2 жыл бұрын
This is super cool! I’m fairly new to this, so I’ll have to learn more about it, but I am planning to build a rc car powered by a little 2 stroke engine this way. Servo motors for steering and throttle. You have a new subscriber ;)
@matthieuhelias1400
4 жыл бұрын
Hi How to mechatronics, I like all your videos you explain super well and I would like to challenge you : you have to make a video where you show how to make a multifunctional robot : - avoiding distance - tracker line - bluetooth joystick ( NRF24L01 or HC-05 ) and more if you want : ) Good luck
@manofmesopotamia7602
3 жыл бұрын
2:14 AMS117-3.3 should be connected to RAW to Be powered from the battery not from VCC , because VCC is coming from AMS1117-5 that power the pro-mini, which means you over load the AMS117-5 😊
@alico797
4 жыл бұрын
It is always a pleasure to see your videos and the thoroughness with which you do things!...
@Multizaler
4 жыл бұрын
In terms of power consuption, how efficient is compared with an common radio controller? Good video, very interesting
@electrozon05
4 жыл бұрын
Thankyou very much sir for making this 🤗🤗🤗
@LongPeter
Жыл бұрын
Damn, I was waiting for "…and you can buy all of these components as a kit on my website.".
@ryujiyamazaki583
4 жыл бұрын
Hi, thanx for the amazing video and please make more videos like these, really appreciate that! I had a question, can the signals of the receiver be increased from 700 meters and what is the frequency?
@Gordyhand
4 жыл бұрын
Have you looked at the keywish rf-nano. It combines the two boards into one instead. Allowing for much smaller and simpler layout. I’ve got a few pcbs made up with the rf-nano on the way to try out.
@HowToMechatronics
4 жыл бұрын
It looks like a good option, but I haven't tried it.
@Gordyhand
4 жыл бұрын
How To Mechatronics I will try to let you know how I get on.
@gulshan0799
4 жыл бұрын
We Really missed you sir. it's really good to have you back.
@electronic7979
4 жыл бұрын
A great video. explaining the codes was also very useful.
@HowToMechatronics
4 жыл бұрын
Thanks!
@vinzzz86
4 жыл бұрын
hi bro can you help me with the capacitors voltage because if i use wrong voltage i will burn it plsss help me with the voltage of 100uf and 0,1uf
@electronic7979
4 жыл бұрын
@@vinzzz86 You can use 50v
@vinzzz86
4 жыл бұрын
@@electronic7979 can i use 100uf 50v and 0,1uf 50v?
@electronic7979
4 жыл бұрын
@@vinzzz86 yes
@kobyki1374
4 жыл бұрын
Thank you for your great videos and lessons. It’s always very clear and simple. It will be great if you can do one on expansion boards like the sensors shield Ver 5.0 or if you can recommend a you tube regarding it.
@dexterdoom4822
4 жыл бұрын
Perfect! At this time I make wifi control car model.
@bryanlewis3470
4 жыл бұрын
One more request man, I'm going to build both of these transceiver set you have made...bit I'm very confused about how to connect the receiver to the Arduino Uno (FC) and the coding...a video from you will be great and helpful
@HowToMechatronics
4 жыл бұрын
It's the same as connecting it to an Arduino Pro Mini. Just follow the circuit diagram and connect the Arduino Uno to the same pins.
@darshandongare4359
4 жыл бұрын
Your videos are awesome and easy to understand . Keep it up . We all love your project . 😎😎😁😀
@ahmadabid8948
4 жыл бұрын
Waiting for ur next rc plane video !
@messitombinoy7497
4 жыл бұрын
Can you make a video of capturing videos from esp32 cam and showing to a tft screen
@HariPrasad-zx4kj
4 жыл бұрын
Can i use Nano board instead of Pro Mini with same program ?
@key2010
3 жыл бұрын
i love you man, i watched every video you have, but you can't solder to save your life xD
@BrickRoom7
Жыл бұрын
This is a great video I was wondering if you could do a tutorial on designing a voltage regulator that would take any input voltage and output 5v?
@juananayalomeli73
3 жыл бұрын
exactly the information i was looking for. Thank you so much : )
@himanshukulkarni9535
3 жыл бұрын
Pla make a video on how to make six channel transmitter a receiver pls your videos are very cool I like it very much
@bassome3000ify
4 жыл бұрын
Awesome awesome AWESOME! very interesting. simple yet teaches a lot
@HowToMechatronics
4 жыл бұрын
Thank you!
@maxhouseman3129
4 жыл бұрын
Nice tutorial, as always! One comment on your preprocessor directives: constants have to be always in upper case. Greets from an engineer ;)
@HowToMechatronics
4 жыл бұрын
Thanks! :)
@MrGenia1991
4 жыл бұрын
@@HowToMechatronics hi, plx could u tell me. is there a way to use instead of plane battery another power source ? thanks in advance
@webslinger2011
4 жыл бұрын
I would like to know how to enable Acknowledgement payloads to send back data (such as battery level, text etc..). I've only been able to send back boolean values.
@andresvelasquez3373
4 жыл бұрын
hey, i would like to know if you solved your problem. I have the same problem, i want my RC to have a LCD to print values.
@webslinger2011
4 жыл бұрын
@@andresvelasquez3373 I followed julian iilet post on controlling a fan. Just have to declare an int or float variable to send back as payload. I haven't the time to dig further at the moment.
@feliwein_cc
4 жыл бұрын
387k suscribers is totally underrated! u rock!
@majedhejazi7249
3 жыл бұрын
You are incredibly innovative.
@chandananonymus3563
4 жыл бұрын
hi sir dejan. awesome work am succesful in making this project. can you please tell us how to add digital output in reciver section .plz reply us its code
@davidsilvacardona8296
4 жыл бұрын
Excelente materialización del proyecto saludos desde Colombia
@46spikey
4 жыл бұрын
HI awesome project, easy to follow. Nicely narrated. Btw, you dont have to set Programmer if you use FTDI. It is only necessary when using an actual ISP programmer (MISO, MOSI....) Another thought, please dont use solder blobs when soldering pins, its a really bad practice. Please take this as a positive constructive criticism.
@HowToMechatronics
4 жыл бұрын
Hey, thanks for the remarks!
@OMNI_INFINITY
Жыл бұрын
Recommend any videos or tutorials online for how to connect multiple 5V (and 3.3, and 3.7) circuits? Basically would like to know how to combine any 5V circuits together. To answer questions such as: Are opamps and optocouplers and similar to combine circuit designs the best way or is there a better way?
@app213
3 жыл бұрын
Amazing tutorial. Could you maybe make a tutorial on how to connect a JR module to a diy Arduino tx controller?
@edslab5383
4 жыл бұрын
Great! Very explanatory video, I love your schematics.
@HowToMechatronics
4 жыл бұрын
Thank you!
@msrishanth3817
4 жыл бұрын
Bro please make a video on how to make a electronic appliances jammer.
@webslinger2011
4 жыл бұрын
More code to pickup especially the disconnect auto reset. Thanks!
@zevas2007
4 жыл бұрын
Hi Dan I follow your projects and sometimes imitate things. I still find it difficult to program and therefore ask you if you could write me a code. I can then learn from that. I built a tank and I want to use your transmitter and receiver. Please write a Revicer code. Could you do that , please I imagine the following - Left joistick up - Tank moves forward - Left joistick down - Tank moves backwards - Left joistik to the left - While driving, the tank steers to the left, while standing, the left caterpillar turns backwards, the right one forwards (turning on the spot) - Left joist to the right, while driving, steers the tank to the right, while standing, the right caterpillar turns backwards, the left one forwards (turn on the spot) - left joistick push buton - tank shoots - (controls a motor, a motorized firing unit) at the same time the cannon barrel is pushed back and forward (recoil) - controlled by the servo - right joistick to the left - turret turns to the left (controls a motor with gear) - right joistich to the right - turrent turns to the right (controls motor with gear) - right joistick up - armored tube rises (controls servo) - right joistick down - (armored tube descends (controls servo) 4 buttons below - 1 switches the light on and off - 1 turns the sound on and off - 1 switches the smoke module on and off - 1 switch camermodul in the turrert on and off would be very happy for your help
@Meet1802
4 жыл бұрын
Can we use it in drone??
@vaibhavdubey3647
4 жыл бұрын
What is the total making cost of this transmitter and receiver
@diy.Builder
3 жыл бұрын
Cool dut what is use of push button in transmitter
@omkarkhade4602
4 жыл бұрын
Thank you for making this tutorial.
@alexhartung2369
4 жыл бұрын
Great stuff. Glad to have found this channel
@naproctor
Жыл бұрын
Hey Mike, great video. Great also to see some young girls happy to get their hands dirty and do some manual work.
@rootuser9571
4 жыл бұрын
New subscriber why I Didint find this best channle this many days ?
@HowToMechatronics
4 жыл бұрын
Thanks!
@indunilprabhath1484
4 жыл бұрын
Perfect video 👍 , how to controlled a drone using this transmitter , please make tutorial.
@TECH_HELPER_irfan
4 жыл бұрын
Sir make the plane iam waiting for your video Sir why you connected two push buttons near joy stick of transmitter
@TECH_HELPER_irfan
4 жыл бұрын
How to use Mpu 6050 module to control any rc device's And shall we have to re program the receiver to different rc cars plz reply sir please
@afraimetries7088
4 жыл бұрын
Please let me know the range of this module.. i want to use this on my rc plane!
@clevertango88
3 жыл бұрын
i did a simple search and it said ‘100 meters’
@MakerFabio
2 жыл бұрын
Many thanks for the good video. I think this could be a good way to make RC (even) more affortable. Do you think it would be possible to control FLYSKY receiver like the fs-gr3e? they cost 5 euro and they are super compact. so I would you use your transmitter with existing receiver.
@bucketsoflove656
2 жыл бұрын
wow this is really cool
@prashamjain_ndflagship_em5323
4 жыл бұрын
Good one Can we use the transmitter and reciever to fly a drone
@TheOleHermit
4 жыл бұрын
Nice project. Well done.🤙 Apart from having a longer transmission range, what advantages does the NRF24L01/Arduino configuration have over 2 ESP32's with direct Wifi connections, using uPython, MQTT, nodeRED, and/or BLYNK GUI? Thanks for sharing.😎
@elektrostatyka3212
4 жыл бұрын
Does it work with pixhawk flight controller or Ardupilot?
@ScitiveX
4 жыл бұрын
I have a question ?? please look - Is there any way to test SINGLE nrf24l01 board. Is it working or not. I mean test nrf24l01 board without second board. Is it possible ?
@khadidjabzk5094
4 жыл бұрын
Waaaaw 😍😍😍😍🤗😋i really like it Keep going my friend😍😎😎
@deveshbharti7684
4 жыл бұрын
Pls make a video on how to control drone using diy Arduino receiver and transmitter
@marcosdasilva7409
2 жыл бұрын
Vou tentar Fazer. obrigado
@rakshithgouda3705
4 жыл бұрын
Thank you sir 😇
@christianvinuya5233
3 жыл бұрын
hi i just watch this video and i amazed by your works..can you do a project using that rc car by a bluetooth control using smart phone..by using audrino uno,L293d motor driver expansion board,hc05 bluetooth module/audrino nano,bluetooth,motor driver..thanks i hope you will notice me..
@pauloperruci4641
3 жыл бұрын
Hello. I made this radio and it was great, congratulations. but I need a 3 position switch. Can I connect directly by replacing one of the potentiometers or do I need to change something? Would you help me?
@naola6456
10 ай бұрын
I made this project using atmega328p ic. Everything is alright but when I connect to the nrf24 module the voltage regulator get very hot
@nguyenthuy9824
4 жыл бұрын
Thanks. Let see video 1.00’ - 1.06’ again. Your video showed Joystick right controls move to left/right and Joystick left controls move backward/forward I have once question It is possible whether you can use only joystick to control RC car (turn right, turn left, move back, move right)?
@jeffsegovia00
4 жыл бұрын
May I know what software you use for making schematic diagrams? Thanks! Always great content BTW!
@anthonypalfrey645
3 жыл бұрын
Hey please message me if you find out. I've been looking for ages, it's similar to the Fritzing software, but seems more advanced.
@ninuvlog7694
4 жыл бұрын
How to replace Arduino pro mini to Arduino nano
@edwincrawford5619
Ай бұрын
Not sure if your going to reply but I have a question sir. Are you programming the arudnio with orange PCB and also does that code save because it seems like its stored
@techmaster9041
2 жыл бұрын
Fantastic work mate. New sub
@Atif_gammer
4 жыл бұрын
Please make a 8 chanel esc and 4 chanel servo moter please make in my school project I will make a octacopter drone
@Atif_gammer
4 жыл бұрын
Please make sir
@indunilprabhath1484
4 жыл бұрын
plz make sir
@diyzona
Жыл бұрын
He showed you enough. Go learn more. By quad controller and build it.
@2150dalek
Жыл бұрын
Thank you, kept getting [ .ino error! ], later I took a different route to download. Finally was finally able to download gerber files.......I see a 100 ufd cap, what is the other smaller cap? 10 ufd??
@Mrpablotortas
2 жыл бұрын
I would love to see the same project with a stm32
@dominickd9291
2 жыл бұрын
Do you have any videos for how to control the speed of a BLDC motor in a closed loop?
@marijan4303
3 жыл бұрын
where did you have bought the batteries and the holder ?
@vikevignesh4541
3 жыл бұрын
Awesome work bro. I already have a 2.4Gh remote that came with cheapest drone I bought(Hasten 720) . Any idea to DIY a receiver for that?
@GleaveMakes
Жыл бұрын
Would it be possible to have a stepped control knob on the transmitter that could switch between receivers? So for example, switching between model locomotives with the same receiver? This could be a channel switcher.
@wolfgangrupp5297
4 жыл бұрын
HI, wieder ein tolles Projekt,für mich die beste Seite die ich kenne. Grüße aus Deutschland gr. Wolfgang HI, again a great project, for me the best site I know. Greetings from Germany gr. Wolfgan
@fritsbeiler4711
4 жыл бұрын
Hi,Dejan I made the transmitter a while ago and put it away because it did not work at all. I bought the PCB and most of the analog and digital inputs / outputs are fixed by this and cannot simply be changed. Now a saw your project working rc airplane on you tube and I thought maybe I can make this working. I have no experience in coding at all, but because nothing wanted to work, I have now restarted testing the individual parts as the Servo's, the NRF24L01, the Esc, motor etc. These are all working with a simpel test code. I thought there must be something different in the code that makes things not work and I discovered a number of things that make me wonder why it can work in your rc airplane project. I found differences in the transmitter code and the receiver code and I will list them here and wonder how you did solved this? Transmitter complete Arduino code for this DIY Arduino RC: Reciever code Arduino RC Airplane 1=Transmitter code RF24 radio(5, 6); // nRF24L01 (CE, CSN) 1=Reciever code =RF24 radio(3, 2); // nRF24L01 (CE, CSN) 2= Transmitter code data.j2PotY = map(analogRead(A3), 0, 1023, 0, 255); 2= Reciever code int sensorValue = analogRead(A3); 3=Transmitter code RF24 radio(5, 6); // nRF24L01 (CE, CSN) 3= Reciever code elevatorServo.attach(5); // CH2 4=Transmitter code RF24 radio(5, 6); // nRF24L01 (CE, CSN) 4= Reciever code aileron1Servo.attach(6); // CH3 For an experienced programmer this spaghetti of text will be peanuts but for beginners a big mess to understand and make it workable”. Is it possible to let us know how to solve these with the code for transmitter and receiver? Because if I buy also the PCB for the receiver I think this do not work at all. With regards, Frits
@dipanshupaul1819
Жыл бұрын
great video and explanation! Can you suggest a receiver which I can use in 1:64 scale rc car ?
@rupaeshkumarphotography4042
Жыл бұрын
Hi, please upload reciever code for push button, i want to use some relays.
@peterlution
3 жыл бұрын
Great video! How easy to add telemetry? If just battery voltage.
@blossomroy7743
4 жыл бұрын
Sir why didn't you upload videos Plzz upload it continuously sir We are waiting for new videos
@HowToMechatronics
4 жыл бұрын
I will, thanks! :)
@privatepreviewer9167
4 жыл бұрын
u can tell his indian
@guppygardening1507
3 жыл бұрын
How to connect transmitter to recever not connect transmitter to connect without control
@IrfanPti
Жыл бұрын
Which components I should have to make this system...plzzzz tell me all the components?
@ElectruinoDiy
2 жыл бұрын
i am trying to add button code in receiver but no success please make toggle switch and push button example i am noob in Arduino language
@WTechEducation
4 жыл бұрын
Thank you. Good job
@kerryomo
4 жыл бұрын
I as a beginner Arduino, if you can share how to connect audio streaming via NRF24L01 from the receiver to the transmitter
@hariharasudhang1049
4 жыл бұрын
Pls show how to control rc cars using accelerometer
@omkharde2325
4 жыл бұрын
Oh yes finally
@sumedhalamba5389
4 жыл бұрын
Please make drone with it
@teroidtech
4 жыл бұрын
hi thanks for the videos i need some help on my drone project. not much, i need to control it wireless, can u help.
@arsars8649
4 жыл бұрын
Plz make a drone with this reciever ASAP
@ALL_ONE_SUN
Жыл бұрын
If combining 2 circuit designs that are both 5V, is it necessary to provide 10V from power supply? The concept of loads causing a voltage drop and the kirschoff voltage equations have caused that question basically.
@vallupatil5243
4 жыл бұрын
What is range of transmitter
@jiaulhoque1226
Жыл бұрын
Sir,,,make an 12channel transmitter with 5-10 km range. 12 channel receiver and disply
Пікірлер: 421