Supplies needed for this project are listed in the video description
@sakibmohammed4337
5 жыл бұрын
Virginia
@alexquiton7279
5 жыл бұрын
Thank you so much for this awesome video 😎
@aldobiglari4575
4 жыл бұрын
Would you kindly Show the same thing to add a USB port to the old stero system? Thank you.
@subzero907
4 жыл бұрын
@@aldobiglari4575 it doesn't work that way. The old stereo is too stupid to know what to do with a USB connection, and there is no way, relatively speaking, to make it smarter.
@lorihutch1911
3 жыл бұрын
Ok I have a couple rocketfish speakers nothing else with them. I thought they were Bluetooth because they have a button on the back that says pair. Apparently they are not they are something for a radio channel. Is there a way I can turn them into Bluetooth?
@SkyHookSteel
3 жыл бұрын
I AM SO VERY THANKFUL TO HAVE COME ACROSS YOUR VIDEO.... NOT ONLY WAS I ABLE TO TURN MY ABSOLUTE FAVORITE STEREO SYSTEM IN TO A BLUETOOTH SOUND MACHINE, AFTER MY NEIGHBOR SEEN WHAT I DID, HE ASKED ME TO MAKE HIM ONE TO FOR HIS SOUND SYSTEM, HE PROVIDED EVERYTHING I NEEDED, I PUT IT TOGETHER ....HE PAID ME 200!!! NOW HE HAS ALL HIS BUDDIES ASKING WHERE HE GOT IT THEY WANTED ONE FOR THEIR SYSTEMS TOO. HE TOLD THEM 250 EACH ...LOL I HAVE SOLD 17!!! WOW......THANK YOU!!
@DIYmonkey
3 жыл бұрын
Awesome! That will be $50 please
@sheilamuhia1331
Жыл бұрын
@@DIYmonkey😂
@majorleagueswagout5944
Жыл бұрын
88ku0iioi8ilul8ikilii8íilpol99 or io898
@jonathanwayne5275
Жыл бұрын
Hi i have a LG arx8000 home theater system,and i have a Bluetooth speaker box so if i made a Bluetooth for my receiver tel me where at the back mist i connect it please any help?
@jonathanwayne5275
Жыл бұрын
Is there any help from you, i did sent messages to you,.
@williammcveigh1143
2 жыл бұрын
I learned something new. The superglue idea for the small wires is genius. I would have never thought of that. This is why I love watching DIYers.
@dancinpigeons4130
Жыл бұрын
Little tip you can buy heat shrink solder joiners now! None the less great video will be trying this
@GM-bs1tw
3 жыл бұрын
I just want to say I do appreciate how in-depth and in detail he was. I was literally doing it in my head as he was explaining it, & as like a question would come up. With out even having to ask, he was on point, clear, and very educating when I didny fully understand. I was able to do it myself & was successful. Thank you DIY Monkeys.
@stiklenanoge
2 жыл бұрын
Same
@wolfiefish-8335
3 жыл бұрын
Had the same idea, coz I had an old Bluetooth speaker just lying around. Tried to set it up and failed. But your video told me where I was going wrong, I never separated the wires. Works like a dream now. Thanks.
@Z-Ack
3 жыл бұрын
Wow, so you took it apart and just twisted all the wires together in a knot then... didnt know to separate the +\- wires... hmm.. yea, dont take on any electrical projects like ever..
@wolfiefish-8335
3 жыл бұрын
@@Z-Ack I agree. That nuclear reactor project has been put on the back burner until I watch a few more you tube videos.
@wolfiefish-8335
3 жыл бұрын
@@Z-Ack to be fair though, I did separate the red and black wires, just didn't realise that there was a positive and a ground within the one wire. I do now
@ssserotonin1373
2 жыл бұрын
@@Z-Ack LMFAO
@RubenEditIT
4 ай бұрын
Although your video was some time ago i just made an stereo junk-bluetooth box an reciever for my audio-setup. Great!
@meredith448
3 жыл бұрын
Excellent! I’m so glad I came across this video going to try this tonight with my inherited older Onkyo amplifier bc it has nothing, I mean not even a HDMI BUT I just couldn’t bring myself to trash it bc it still makes the old speakers sound great ....So thanks !!
@frankrinchiuso3380
3 жыл бұрын
I got a Denon amp but a pair of Onkyo speakers my brother and I but back in high school that were 175 each on clearance so they were like a lot for the '90s and wipes out of town I could actually use them LOL
@Adam-118
3 жыл бұрын
YeeeeeeeeeYEEEEE I've got a few Bluetooth speakers, and random speakers I've tore out of systems just collecting dust. I've got all the parts and you just showed me how easy it is to make them all a Bluetooth system of some sort to be decided in the next couple hours hahahaha. Thanks man.
@angellijah9721
4 жыл бұрын
This is soo cool...i've always wanted to hook up my Old Stereo to a bluetooth device...im sick of changing channels at a device if i leave on a shelf while doing some chores every single time i wanted to switch songs from youtube or etc...this will help out while moving around in the house switching music etc from the device wirelessly...this is pretty awesome I will try this...thanks
@bobtherocker4598
5 жыл бұрын
I've figured out how to do this about a year ago and it's just gonna sound distorted. Even with a tiny cheapo your still going from a speaker level to line level. I give you props for the vid though, good job. So as not to be "THAT GUY", just solder or use a female multi pin connector to run a 4.7uf or 10uf capacitor between the + and -. Worked for me on that amplifier board, should work on most of them. Keep ROCK'N! ,🤘👍
@michaelgrayson7762
8 ай бұрын
Aye there, have any more info for clarity. I'm thinking of taking a bose home sub woofer and turning it into a Bluetooth portable
@bobtherocker4598
8 ай бұрын
Honestly this video is more of an experiment just to see if it works, which it does just not very well because a 3.5mm or RCA input requires a small amount of filtering. If the output is coming from a bypassed speaker there is no filtering. That's why I suggested using a capacitor in parallel between the+ and -. If you are thinking about doing this, just buy a Bluetooth receiver. They're cheap and will do exactly what's in this video without complications. 🤷👍
@wayneG68
5 жыл бұрын
thumbs up and subscribed. I love it when i see someone doing a simple DIY project at home and especially when it comes to gadgets. I'm always looking for home DIY stuff or lifehack type videos.
@tomgold9697
4 жыл бұрын
Great bit of repurposing, thanks for sharing mate!
@SevdaH85
2 жыл бұрын
finally i put my old Bluetooth speaker back in action thanks to your video simple and easy.😁
@Lordvoldemore
3 жыл бұрын
I thought you knew what you were doing until you brought out the glue. Still it’s a pretty good idea & I enjoyed the concept.
@offscreengaming8363
10 ай бұрын
I've done this, tho you may need a bigger battery because the stock battery is made to power a small 8watt speaker at most, so with even hooking it to a system of any sort that requires more power input can bring that battery life from 4hours of play time, down to 10min play time. (From personal experience only, I would wish some people to read this before ruining a speaker without knowing the cons
@inspectorsteve2287
5 жыл бұрын
I have a tip. If you don't want to use your teeth to strip the small wires use a lighter. It doesn't take long to melt the insulation a little. Basically warming up the insulation so it stretches and breaks easily.
@JakePlisskin12
10 ай бұрын
There is many different approaches that can be taken before using your teeth. Takes on little wire getting stuff to bust your tooth in half.
@inspectorsteve2287
10 ай бұрын
@@JakePlisskin12 nope just a light nothing else will work. Teeth and a lighter. Lol. Just messing with you. You're right
@doriscampbell9775
3 жыл бұрын
Thanks, mine turned out great. now my laptop can play thru my guitar amp so i can practice by trying to keep up with Chuck Barry or ZZ Top
@jamesferris6131
3 жыл бұрын
perfect I like your style If you do some Chuck🎸 Berry (RIP) you got to do the duck walk, and if you do some ZZ Top Billy gibbons would be proud to know your practicing some Skynyrd too, after all he got them their first paid gig !!! Rock⚡on✌️- JF🎸🐾
@dan5660
4 жыл бұрын
Dude you're a genius- thanks for this!
@bobbyy8711
4 жыл бұрын
great vid!! I have a speaker here of almost the same type, single speaker, I have a question though, will the voltage output of the bluetooth match amps and preamps today both car audio and home audio? greetings from the Philippines..
@Jackrip
5 жыл бұрын
Worked great; easy to do. Used "wire glue electrically conductive glue", can be found on e-bay & amazon.
@ryanvanzant4788
3 жыл бұрын
Thanks for this the young generation need these things...
@peasant502
3 жыл бұрын
Cool rant, boomer
@marcusgraham6695
5 жыл бұрын
Man, I was already a subscriber, so when you flipped the optional material around 05:15 I became a fan. Nice work 🐵
@richmarsh5029
4 жыл бұрын
Great video mate.. Big Thumbs up from Australia
@martinheath5947
4 жыл бұрын
Great idea 👍Any way to make a stereo version using two units?
@Barbara-el5wl
4 жыл бұрын
Omg I love KZitem and people like you. Awesome👌
@NathyTheNetbook
4 жыл бұрын
Used a cheap onn headset from Walmart 6 bucks and an eighth inch I had laying around stereo and it works brilliantly than you good sir just what I needed for an aux input to stream bass technique tutorials to my amp so I could practice without disturbing others. There are other ways but from a Google phone this is the cheapest I've seen.
@alfredoibarra9825
2 жыл бұрын
Cheap Bluetooth headphones work great, have stereo sound (L+R)and have built in rechargeable battery. I’ve made it with a 3.5 jack out put to work on cars with 3.5 aux input.
@molorjul
4 жыл бұрын
If you look a little bit furter into that pcb, I bet there is a stero output not being used for that mono speaker. The standard output of a DAC connected to the uC and bluetooth chip is stereo.
@molorjul
4 жыл бұрын
but so far, what you have done, is really cool.
@rb-ro2po
6 жыл бұрын
Man you make a great tutorial video! You should keep doing more video with this much depth of detail and explaining. It helps a lot. You should do this idea but using the same concept of using a old bluetooth speaker to add this to a portable speaker that doesn't have bluetooth but already has a battery. So basically you'd be adding bluetooth to the portable speaker and hooking it up to the already existing battery from the speaker so all gets charged at the same time. This is what I'm trying to do and why I found your video lol So if you have time to try this I'd be super happy to see this cuz I'm stumped lol
@thomascooper6655
2 жыл бұрын
Wireless +ransportation of energy?
@sibbzteunissen3393
Жыл бұрын
Thank you very much for the comprehensive tutorial ❤
@chucolilchuco
3 жыл бұрын
Will this work if I attach the bluetooth to a car speaker? My car has no aux
@josephinnecken8844
3 жыл бұрын
Absolutely amazing!
@rickdickurass
Жыл бұрын
add input to circuit board no auxiliary input optical only
@lithiumlounge6731
5 ай бұрын
I’m confused tho…do you still have to charge the speaker to turn on? How can u wire RCA wire to battery?
@1malikalik
Жыл бұрын
Bro, I appreciate your ingenuity and love your content and that is why I instantly subscribed to your channel. I would also suggest for under $20 Amazon has Bluetooth modules that convert old stereo to Bluetooth capable and am certain it would work in this application. It's a plug and play.
@themaximusone
2 жыл бұрын
You can also buy a USB BT & it's small so you can leave it hang behind your system 😉
@pupito4709
2 жыл бұрын
Great video, one question: why doesn't it sound the same? Mine only seems to output the higher frequencies, no bass.
@HappyHookers-bh3rs
3 ай бұрын
I watched to see how it hooks up to the stereo . Guessing just plug into thw auxiliary rca jack in the back huh? I'm trying to figure out how to do the same thing with a boom box from the early 2000's but it doesn't have auxiliary Jack's. But the thing thumps louder than any Bluetooth speaker on the market, so if anyone knows how, or has a link for a videonfor that, I'd appreciate it
@rafikulahamed959
8 ай бұрын
Bro, this is thousands years old idea 💡
@Project81X
Жыл бұрын
I’m not entirely sure what this was for. Was the small Bluetooth speaker converted into a Bluetooth receiver for the larger speakers?
@matteigtch1625
6 ай бұрын
How would you put it in discovery mode? Just asking. Some things, you have to hold power or a combination of buttons
@netapgod7572
3 ай бұрын
Soo can you straight connect it to a subwoofer or do you have too connect it to the amp?
@MORGAN31ish
2 жыл бұрын
Hi there, thanku for your video, I'm messing about trying to make some old speakers Bluetooth compatible but I was using the jack plug socket on my little old Bluetooth speaker but when playing music it sounded terrible. Should I try wire some speaker wire to the circuit board itself, would that work better? Again thanks 🙏👌👍
@williamhelus3522
3 жыл бұрын
When you on hook the new line out, does the original bluetooth speaker still work to take with you while walking/biking? Not everyone get to drive, o.k.? BullyBilly.
@jaedahlkwon9345
5 жыл бұрын
Excellent work.. How do you supply power for bluetooth module... ?
@MrSnead-vp1ll
2 жыл бұрын
I think he recharges it in the old speaker
@wordswordsapteek7113
2 жыл бұрын
Thank you for your hack, Mack!
@johnnysaad6415
6 жыл бұрын
It works but the sound won’t be clear and you may face some issues in couple hours or days. 1. You hooked high input to a low input 2. You don’t have the ability of the surround sound system because you hooked both left and right RCA together. 3. Don’t forget you have to charge this thing, if you did at the same time as many people will do and both the bluetooth speaker and stereo functioning at the same time you will perfectly ruin this little Bluetooth board, because the stereo system works with higher voltage. last thing great job I very respect the idea. I recommend trying this idea because at the end it’s just a cheap Bluetooth speaker nothing to loose. 5$ and a weird smell of burnt cables.
@SeanKillblane
6 жыл бұрын
How could you solve that problem?
@guadadvent
6 жыл бұрын
Hi This is a mono receiver You could put 2 resistors in output
@robertcartier5088
5 жыл бұрын
Your 3rd objection doesn't make any sense. You seem to be objecting to something that is not even hinted at in the video. If you mean that you cannot charge the Bluetooth device while it is functioning, then you are wrong. If you mean that one should not connect the output wires while leaving the internal speaker connected, then you are right, but only if one does not follow the instructions in the video, which is a useless objection. Sorry, Dude, you should have stopped at 2. ;-) Oh, and your #1 is also technically wrong, there are no instances where an input is connected to another input in this video. But I assume that was just a mix-up. You meant the signal levels don't match, which is true. And last, but not least, no cable will be burning from these still very LOW voltages. If you're smelling burnt cables, you have some other problem that is unrelated to this video.
@RoyDove
9 ай бұрын
Only in the good ole US of A. Awesome
@Jerrys45
Жыл бұрын
Question: Would it work if connect it to a lets say a 4inch speaker?
@kraigrichard7043
Жыл бұрын
Thanks. bluetooth receivers for stereo systems cost so much
@frankrinchiuso3380
3 жыл бұрын
Thank you great video I don't know why it didn't occur to me to just use the speaker wire as the output I overcomplicated it in my head awesome awesome I've been wanting to do this with an old Bose Wave radio I found in the garbage works great sometimes be nice to just play the song on there instead of that crappy little Google speaker thing. But by the announcing that crappy thing just gave me the idea I could use that straight the same way! Thank you again by writing you a comment gave me that idea! Sweet
@frankrinchiuso3380
3 жыл бұрын
Next I'll work on punctuating my comments 😂
@whyme2818
4 жыл бұрын
that is gonna just have a left or right channel only. still won't here one or the other since it's only 1 channel but of course you can put that wire to play on both channels but still will not hear the channel that is missing unless the blutooth is originally mono channel.
@danwilliams3915
3 жыл бұрын
Thats awsome man Good work and thank you
@VideoNash
3 жыл бұрын
thanks
@spider15068
7 ай бұрын
Hello where do you hook up the RCA jacks to ? Can you adjust the volume using your old stereo system?
@bridgetteharvel2636
4 жыл бұрын
thank you so much that was awesome and I'm going to try it..I am single so no guy to help with all that haha and iv always been do it myself kinda person anyways! 💯😏 & this video is simple EASY &..detailed perfectly 👊
@joncashiv1519
3 жыл бұрын
So will this make the cube type device trip off? Like back in the day when i would hook my 10" Cerwin Vegas to my Awia bookshelf stereo, ya know?
@sanb3586
5 жыл бұрын
1 never feed amplified signal as input for any amplifier it sounds distorted 2 (for this video) it's split mono setup 3 it's cheap to buy Bluetooth receiver module/Donegal then Bluetooth speaker
@NOAC91
4 жыл бұрын
and never cut both poles of a battery's at the same time with a metallic plier
@kingserrato5793
Жыл бұрын
So simple! Thanks !
@Flipsters101
8 ай бұрын
Excellent!
@SuperPmc123
4 жыл бұрын
Will this work for a xbox one S controller enabling it to recieve signal from Bluetooth headphones?
@richardeipl3092
Жыл бұрын
Thanks man! Super helpful!
@JessicaSmith-fh8nn
7 жыл бұрын
is it possible for me to convert my surround speaker to wireless? I'm using multiple of "JBL EON 510" & a single of "samson auro d1200" (active sub). ..... (and the mixer) ........ I want know what's the best path for me to make my spkrs/sub wireless. tyvm from ur help.
@michaela9210
27 күн бұрын
Great Bro ..Thanks
@dalebronniman9060
3 жыл бұрын
How about using the Bluetooth units from two speakers that pair with each other to get both channels
@MrSnead-vp1ll
2 жыл бұрын
That would work. Especially if they were designed as stereo . Anker Soundcore has made them quite a while. Maybe find an old used pair?
@jasonphillips1342
3 жыл бұрын
Do u have a diy video showing how to transmit audio from the TV to earbuds over bluetooth
@ddietr
3 жыл бұрын
Help. I have an old Sony MHC-F150 Multi Cd stereo. The only input are MD/Audio in and out. 2 red and 2 white. I bought a blue tooth receiver. Cannot get it to work.
@clementebarrera3451
4 жыл бұрын
How about the RCA that have, the red and black and the outer wire, in other words has 3 wires? Thank you.
@peksssixseven2682
4 жыл бұрын
Wait a minute wait just one sec bud... I was doing great up until the tooth pick where was the toothpick purchased from ???
@nickyz0623
4 жыл бұрын
Red Lobster gives them away... But don't let them see you leaving with it because that would be stealing 🙄
@tonysindano5349
3 жыл бұрын
Wow
@doriscampbell9775
3 жыл бұрын
I sell hand crafted toothpicks 100 percent organic with a zero carbon footprint. They are 49.95 each if you buy 1000 at a time. Let me know how many cases you need, Any order over 100k gets reduced shipping.. Thanks John
@lorihutch1911
3 жыл бұрын
Ok I have a couple rocketfish speakers nothing else with them. I thought they were Bluetooth because they have a button on the back that says pair. Apparently they are not they are something for a radio channel. Is there a way I can turn them into Bluetooth?
@jonathanwayne5275
Жыл бұрын
Hi i have a (LG ARX8000 home theater system) and i have a Bluetooth box so i want to know where do i out it in of my receiver?
@roni2671
Жыл бұрын
How do i wire power from my speakers to my cheap Bluetooth speaker so it stays on all the time instead of charcing it all the time
@AnywhereButHereArtist
2 жыл бұрын
Awesome! Thank you
@Joe-xj2tb
7 ай бұрын
I tried this three times and everytime they fried- Im using the bluetooth same as you did and im powered by the outlet so whats goin on with the bluetooth fryin?
@kelvindelarosa3998
4 жыл бұрын
Your voice bro is like the one on windows 😬 thanks for the tutorial
@MrAlshahawy
4 жыл бұрын
I wanna build a TV AUX to Bluetooth transmitter. Is it possible to do that using an old Bluetooth headphone that has an AUX port.
@ENIGIZERb
2 ай бұрын
So how do you hook it up to the stereo.
@ezsibe
3 жыл бұрын
is this mono or stereo ? or fake stereo with 2 canal mono ?
@jebtheone2241
3 жыл бұрын
this great sir tnx for this video..
@froglegs4910
5 жыл бұрын
You are so creative funny ! Very smart idea ! Save old loud speakers now !
@jkoz292
4 жыл бұрын
Not sure but is this a somewhat amplified signal. Im assuming you cut the wires going to the bluetooth speaker and turned them into a line out output. Guessing it is a 3 watt speaker so it will be safe for line out voltage levels but just making sure I understand what you did?
@DIYmonkey
4 жыл бұрын
It is an amplified signal. I just keep the media volume on my phone set at level 1. The tuner I have it hooked up to is a pretty robust, old-school Onkyo. Never had any issues running it this way, despite what the naysayers say.
@matthewmahadeo6997
3 жыл бұрын
I was wondering the same thing. Since the amplified signal is weak it should not cause any explosive amplification problems. But if the input signal was greater like a 30 watt line 6 amp looped into the input of another guitar amp then the amp would blow. Jus curious about keeping your phone volume at 1. Does this mean d output is decreased? In terms of resistance?
@paulbalshin6401
3 жыл бұрын
You're awesome bro thank you
@bluefeathercalnimptewa4307
3 жыл бұрын
I have it built but don't know where to plug wires to speaker wires or plug in right left plugs
@futiktokha
6 жыл бұрын
Great stuff!
@Tracks777
7 жыл бұрын
Fantastic video! Keep it up!
@marlonleiva9335
3 жыл бұрын
Man I know ur video is 4 years old but I tried it didn't work for me did u get the wires from the speakers or the bluetooth
@walleyehunter8862
3 жыл бұрын
Does the battery voltage matter ?? I have a 5 volt Bluetooth I want to hook up to a 12volt Bluetooth
@thegeneraljoe67
4 жыл бұрын
Great video. Can you or anyone else suggest a diy rig to add bluetooth to this tv? I need a remote bluetooth speaker to listen to this tv audio and NOT use the speaker thats built into the tv. ( samsung pn51d450a2d ) ANY SUGGESTIONS ?
@papergatorzfedducca7998
2 жыл бұрын
Thanks!!! New subscriber!!!💥💥💥
@frickinda
4 жыл бұрын
Awesome info sir
@allbarzent
4 жыл бұрын
Nice thanks 💡
@bhemati
3 жыл бұрын
I wished you would show the back of the stereo and say what input do u plug it in? I have video, CD and phono input!
@classycajun7806
3 жыл бұрын
That are all the same, unless one doesn’t work any of those should work
@classycajun7806
3 жыл бұрын
They*
@ceebeezy3038
4 жыл бұрын
Awesome my man
@trble57
6 жыл бұрын
Well done! Awesome idea. ☺ Question, this off the wall, but I have to ask. I have a couple of good but old Bose Speakers with just speaker wire. Is there a way to convert my Bose, so they can connect to a flat screen tv? I Use to connect from Speaker to stereo, to plug into tv. Or can one make them into digital speakers? Thank you Great Review... 😉
@DIYmonkey
6 жыл бұрын
You would still most likely need an amplifier to power the speakers
@Sorrentino_Gianni
5 жыл бұрын
@bob joe you were lucky that the speakers impedance did not burn your phone's jack circuit :)
@tetrahydrocanibonol
5 жыл бұрын
@@Sorrentino_Gianni connected a 9v to speaker wire trying to make an amp when I was just learning yeah. Rip htc desire 626 pretty cool light show though I had the battery expand and everything
@xr500t
3 жыл бұрын
I'm confused, but I think I get it. Your taking the cube with the bluetooth, hooking it up to your stereo and casting to it so the sound comes out of the stereo speakers. Doesn't the sound come out of the cube as well? if so, what a train wreck for sound! If not, then, wouldn't it be easier to add a bluetooth receiver to the stereo?
@arievoorwinden4957
3 жыл бұрын
There would be no sound coming out of the cube as he has disconnected the speaker inside the cube from the motherboard basically
@cleandiaper
4 жыл бұрын
Excellent!!
@rogertyler3237
6 жыл бұрын
Yah putting Bluetooth in old school Stereos is pretty cool. I have a Sony Bluetooth stereo & an Ion Bluetooth turntable. It also records old Records to CD'S & I just Love putting old CountryRecords Onto CD'S
@robertcartier5088
5 жыл бұрын
I like to play country music backwards... It ain't satanic like rock'n roll. No, when you play country music backwards, your girlfriend forgives you, your dog doesn't die, and your pick-up truck starts on the first try! ;-)
@aquiroz651
4 жыл бұрын
very nice , thank a lot
@maddmavic
5 жыл бұрын
If I do this in a vehicle and I have ants do I connect it to the amp audio input or the stereo audio input
Пікірлер: 342