How to make a Bow String Jig for under $50. This will work for making any continuous loop bow string. Make a string jig with things you can find at any hardware store. #bowbuilding #DIY #archery
Thanks for the idea. I noticed you installed the spring nuts upside down.
@Makingitwild
Ай бұрын
@@danesorensen9874 I thought it would help it slide when being adjusted. I’ve tried it both ways and it doesn’t seem to make any difference. I have it turned around the right way now. Thanks
@homemadetools
4 жыл бұрын
Nice work, subscribed! We featured this video on our homemade tools forum this week :)
@slydn23
10 ай бұрын
Thank you for the video. Just wanted to let you know the spring nuts are upside down. The spring goes to the back. There are track grooves in the face of the spring nut. They will hold way better that way. But awesome job and thank you.
@Makingitwild
10 ай бұрын
Thanks. I flip the nuts because the arms need to slide to make length adjustments. They might slide with the springs the right way. I’ll give it a try
@can5projects563
2 жыл бұрын
awesome idea mate. well done
@vincentdegraaf2222
3 жыл бұрын
Nice build thanks for showing
@SirFancyPantsMcee
2 жыл бұрын
So all I need to do is get a machine shop and I'm good to go? Super DIY.
@Makingitwild
2 жыл бұрын
That’s right.
@SirFancyPantsMcee
2 жыл бұрын
@@Makingitwild I think this project is about to cost me more than $50.
@Makingitwild
2 жыл бұрын
@@SirFancyPantsMcee a long bolt could be used in place of the string guides. You could put a nut on top and bottom of support so you don’t need to weld or turn anything on a lathe. You could grind down the head of the bolt or cut it off. A drill and saw are the only things you’ll really need. You can also use 2x4 scraps to build it but it’s not as rigid. Good luck on your build
@SirFancyPantsMcee
2 жыл бұрын
@@Makingitwild if I drill through the square tubing with a hand drill. Could I fill the square tubing with some wood?
@Makingitwild
2 жыл бұрын
@@SirFancyPantsMcee no you would need to put the wood in place of the square tubing.
@wadesaunders583
3 жыл бұрын
Nice work man!
@mickeyhuggins7850
3 жыл бұрын
Hey man I think that's a great string jig you built I'm gonna see if I can't duplicate it thanks for sharing DIY with us.Take care brother
@Makingitwild
3 жыл бұрын
Great. Good luck. If I can help answer any questions let me know. I think you’ll like it.
@danielklee2933
2 жыл бұрын
Very cool Ty Lee. I have been watching quite a few videos to get an idea how they are made and how they work. I like the way you did this one. I'm going to get the stuff to make it today. Thanks for making this video.Peace out!
@Makingitwild
2 жыл бұрын
Great. Good luck on yours.
@user-qw7kh4ll3d
Жыл бұрын
Great job 👌
@ceceliaseepersad5843
3 жыл бұрын
great jig bro
@Australian_Made
3 жыл бұрын
Good video ✔
@electoplater
2 жыл бұрын
hi can u tell me the distance between the vertical string posts thanks
@Makingitwild
2 жыл бұрын
I think this one is 16” but I can’t remember and I’m not where i can measure it. It’s not critical to the spacing but I wouldn’t go shorter than 12”. It just depends on what material you have to work with.
@k8dfi
3 жыл бұрын
How did you tie the string off to start wrapping, I didn't see in the video. Thanks
@Makingitwild
3 жыл бұрын
You start with a simple overhand knot on the back right post from where you are standing. You end on the front right post and wrap it around to hold tension. The serving holds everything together so there is no knot on the string after you trim the ends. You can tie the two together but that is a different style string. I hope that helps. Good luck on your build.
@k8dfi
3 жыл бұрын
@@Makingitwild Thank you
@FPChris
3 жыл бұрын
What did you use to stretch?
@Makingitwild
3 жыл бұрын
I use an eye bolt through angle iron with a scale between the string and bolt. I’ve also used a ratchet strap in the same way between fence posts and that worked well but most of the time I’m making recurve and longbow strings so I don’t pre stretch them because it’s easier to have the bow do it.
@twintwo1429
Жыл бұрын
Nice string jig. But I'll have to buy 3000 dollars worth of tools to make it. I am 58 years old. The money that I put into retirement when I was 25, instead of building a shop, now has grown to 5 times as much, and still growing faster than building a shop with equipment. I've managed to still do all kinds of things on my back porch and in my shed, without all the fancy crap. My abilities and accomplishments are great, yet my bank account is full also.
@Makingitwild
Жыл бұрын
You’re right that it doesn’t make sense to buy tools just for one project. It also doesn’t make financial sense to build a string jig just to make a couple strings because you could buy them cheap. I already had those tools and enjoy building things so even if it seems like a waste of money you can call it entertainment or working on skills.
Пікірлер: 33