this is not just how to build a bunk bed with 100$ that made me watch this, it's how I enjoy watching whole family help around to built it and the best way to spend time.
@shantahsieh4833
2 жыл бұрын
I will try to do it with Woodglut plans.
@krystalsmith7989
5 жыл бұрын
Thank you so much my husband and I was just sitting looking at how expensive these things are and out of no where I’m like let’s make one and he agreed and then we found you thank God we did!!!
@shanedamron4496
4 жыл бұрын
I just got done building my granddaughters these bunk beds using this video, worked out perfectly, thanks.
@racheat
6 жыл бұрын
I'd add blocks under the 2x10's as your hardware is seeing all the load in the form of shear. Personally I use 4*4 posts and 3/8 hex bolts with a washer on each end and a lock nut following the first. Two bolts per end, four per corner.
@pierdelune
2 жыл бұрын
THANKS FOR LAYING OUT THE CUT LIST BUDDY! 😎
@learningkids8897
4 жыл бұрын
Quick suggestion for everyone, either slant the bottom cutout or round it off. Too big of a chance for that square corner to catch legs, arms, heads, etc. if bumped. I nice radius rather than the corner would be safer. Nice work and thanks for the video and info on this.
@justinpatchez2094
4 жыл бұрын
I also recommend this i cut ad steep andles and heavily sanded all edges on the climb over board... great comment!!!
@BaxasanA
6 жыл бұрын
Loved the kid's helping. I love kids
@niwradsiphone
7 жыл бұрын
Thanks Matt! Been trying to get ideas to build a loft bed and your design is perfect!
@barthwife7116
5 жыл бұрын
Thank you for this explanatory guide. It looks pretty sturdy. One way to improve the joints is to use a Kreg clamp to pull the butt joints together before screwing. Though that sounds like a dirty pun, it is a tip I got from a friend who makes cabinetry professionally.
@laurala8310
3 жыл бұрын
This looks awesome. Current price for me would be $180 but that’s not too bad.
@19d3lta9
6 жыл бұрын
Nice build! I like how the whole family was involved in the assembly! Also I seen in the comments that you are from Krum. My father lives in Krum
@ericsanquist
5 жыл бұрын
now if it had small cabinet posts and maybe a built in light under the top bunk and for the ladder you could make a four step dresser
@1986yamahafazer69
3 жыл бұрын
👍🏻 nice job! It’s not to complicated to build for an average person like myself that’s not so great with carpentry projects. Thanks.
@anthonysarvabui3908
3 жыл бұрын
Thanks for the video. Need to replace a bunk bed. Definitely going to build.
@alfredabbey6162
6 жыл бұрын
You didn’t mention that one of the tools was a table saw. I always wanted a table saw and now I have an excuse to get one.
@hammondj82
5 жыл бұрын
Alfred Abbey that’s how I got my miter saw. I “needed” it for a bench project. 😂
@ZGGordan
4 жыл бұрын
That's how you do it. Get the tool, make a bench. Now you have tools and a benc and it's time to makse new shit :D
@nickisneat3154
7 жыл бұрын
good plans. I going to use this as a general layout for a bunk bed for my cousins
@jibonjala
6 жыл бұрын
Great Job...love it when the kids come into shot...like can we help you Daddy.
@asmapowell2426
7 жыл бұрын
Yes it makes sense thank you Matt!!!
@traceyevans2757
2 жыл бұрын
Thanks for the video man! Looking to build a small version for my dogs.
@DanielRodriguez-qq1ot
2 жыл бұрын
Here I am in 2022, when gas prices are nearly 7 bucks. I was wondering how did you managed to build this nice bunk bed for under $100, until I noticed the year you uploaded this video.
@aaronwagner8904
7 жыл бұрын
Loved that your kids helped! I'm started construction and the kreg jig makes it so easy to do all the prep work in the garage. How deep are your mattresses though? 6" or 8"? We'll need to purchase them and i like how yours fit flush to the top of the 2x12.
@MaGacc
6 жыл бұрын
Nice work it helped me to make one for my kids. Thank you so match
@jon-patrickw.7969
5 жыл бұрын
Thanks, Matt! You rock man!
@jhnnewsomthings9421
4 жыл бұрын
Loved this video. Quick question: My children have twin xl mattresses; Would happen to know what measurements I need to build them to those mattresses?
@D_Whit3
Жыл бұрын
Nice work!😎
@Oseiwe
Жыл бұрын
You have a gem helping you out. In my world the missus would mock you for even trying
@mericaeveryday
4 жыл бұрын
How has the bed held up. Great video and thanks for the Materials list and the cut list.
@TheMadJester159
4 жыл бұрын
Would not trust pocket hole screws... not enough sheer strength. Saving money doesnt matter when it's done wrong.
@azuniga2005
4 жыл бұрын
What would you recommend??
@contritemarker2555
4 жыл бұрын
I would say carriage bolts
@juliemecham9046
7 жыл бұрын
You make it look so easy!
@mechammatt
7 жыл бұрын
Oh Julie, It is easy!
@StittsBits
7 жыл бұрын
What?! You built that?! Wow. 👌🏻👍🏻
@dexhex1
5 жыл бұрын
Great Job.
@jesusa9841
6 жыл бұрын
What size screws did you use to connect the rails and headboards
@shyamchetri5585
6 жыл бұрын
Nice nice bed
@WilliamHollinger2019
2 жыл бұрын
i will use this when i have kids but rn i want a bunk bed for my brother and i because i want to have room for my desk.
@jontueArtz
2 жыл бұрын
Was kinda confusing for the set up should've put the sizes as you were putting them together but overall great video and helped me alot to try and built this loft bed I need for my boys
@chasemoore9999
Жыл бұрын
2023 price just for lumber $150+ just FYI. Still can’t beat that price though! Any links for how you attached the ladder?
@JoeyMurder
2 жыл бұрын
Major anxiety at 2:20 I was worried about your poor table saw lol
@joeys4363
Жыл бұрын
Hi can you please tell me what size wood you used also screws. Thankyou looks amazing btw
@becca6061
7 жыл бұрын
Nice!! Now let me send you my address so you can come show us personally how easy it is ... 😂
@rubenflores9072
6 жыл бұрын
under 100? here in Denver is 90 just for the 4 2x12th
@emmav8726
7 жыл бұрын
Great video!
@seepugarun1
8 ай бұрын
Great vid. Thanks for posting. Any issues with just using pocket screws?
@justinlunsford9015
7 жыл бұрын
I just went and bought all the materials and cut it down. Are you sure you used 2x12s because yours look like 2x10s. 2x12s seem big and heavy to attach to 2x4s... Makes me nervous for safety.
@mechammatt
7 жыл бұрын
Shoot, those are 2x10's I wouldnt worry about the safety it will just give them a bigger bumper. Sorry about the mix up.
@matthewransom62
8 ай бұрын
What kind of wood did you use?
@asmapowell2426
7 жыл бұрын
Matt which screw sizes went with which angles or side of lumber connections...?
@mardakworkshop4450
7 жыл бұрын
nice job 👍🏻👍🏻👍🏻
@mechammatt
7 жыл бұрын
+MAJEED MARDAK thanks.
@chelseadonell639
7 жыл бұрын
How much did you end up spending just on the lumber?
@justinlunsford9015
7 жыл бұрын
Was the screws you listed the correct size?
@afnanqari2570
6 ай бұрын
How much the matters size?
@TheDiymarketingguru
7 жыл бұрын
What pocket hole jig did you use (I want to buy one) and what length / size screws for the pocket holes? On the fence between the Kreg Jig HD (or) the regular kreg jigs that use smaller screws. Do I need the larger HD for strength on this bunk bed or are the regular ones fine?
@mechammatt
7 жыл бұрын
+Ricky Brandon I used the cheapest kreg pocket hole jig. I think it was around $40. I used 2 1/2" pocket screws since I was attaching 1 1/2 lumber to at least 1 1/2" lumber. Hope this answered your question.
@tonilim9238
5 жыл бұрын
whats the purpose of pocket holes?
@jjustinhill2459
5 жыл бұрын
so you don't see the screw heads on the outside. gives it a cleaner look
@texasbelle87
4 жыл бұрын
Is this for full size or twin size mattresses?
@jionididit1899
6 жыл бұрын
Is this any specific kind of wood or just regular old 2x white wood material like Douglas Fir? That’s what I’m looking at but not sure.
@mechammatt
6 жыл бұрын
I just used the 2x material I got at Lowe’s.
@QuestionEverything2023
Жыл бұрын
If I was to buy this timber in the UK in 2023 I would be looking at £350+
@GuamFamily
4 жыл бұрын
What series Kreg jig do you use for this?
@imonaroll9502
11 ай бұрын
Make sure you use heavy duty screws. Do not use drywall screws.❤
@emiliovazquez8600
11 ай бұрын
Looks like the youtuber hasn't uploaded in 2 years so you don't mind if i ask you? what does it mean by the cut list? Material list "4 - 2x10 cut to 6' 3 3/4" what does 6' 3 mean? what length should the screws be? can for the last wood 9 1x4x8' can i buy actual furring strip? they seem to be 2 bucks each would it work as good sub?. Its my first build project that im considering for 2 short adults.
@imonaroll9502
11 ай бұрын
@@emiliovazquez8600 usually when they mention 6‘ 3 3/4”. He means 72” + 3 3/4”= for a total of 75 3/4” in Length or what ever mattress length your installing. As for screw length use one that will bite the wood good but I do recommend the support brackets to carry much of the weight on the corners. You might want to beef up the support feeding strip to 1.5” and glue it and screw it down because it’s what’s going to support a lot of weight. Some times it’s better if you find some used metal supports to use then you would use a bolt in the corners to attach through the headboard and footboard. Then wood slats Accross then a mattress on top.
@brandiholmes7528
7 жыл бұрын
can you tell me the model of that drill please just for reference and comparison purposes
@mechammatt
7 жыл бұрын
+Brandi Holmes it's a dewalt impact drill
@TheJunkyardgenius
6 жыл бұрын
What size of pocket screws are you using? The biggest ones I can find wouldn't be strong enough to hold that together.
@AidanSkoyles
4 жыл бұрын
should use 2.5 in pocket screws for joining 2x material.
@JS-lb6gp
3 жыл бұрын
@@AidanSkoyles hi What pocket hole jig is that? I can’t find one that will go up to 2inch thick.
@AidanSkoyles
3 жыл бұрын
@@JS-lb6gp K4.
@JS-lb6gp
3 жыл бұрын
@@AidanSkoyles Thanks for replying. That one says 12 to 38mm thick, still not 2 inches.
@emmettr1
6 жыл бұрын
What size screws are you using?
@aaronsmith8596
7 жыл бұрын
You think I could build this as a loft bed and leave out the bottom bunk?
@mechammatt
7 жыл бұрын
+Aaron Smith I think so. Might need to have a brace along the back on the bottom. Just to help keep things sturdy
@lustyv
3 жыл бұрын
How tall are your ceilings?
@marlangeiger9843
5 жыл бұрын
Measurements are wrong the peices that are supposed to be 3' 2" should just be 36" ..... At 3" 2" the bed slats will be 2" short ...40" i did it step by step and my slats are 42" and now there is a big ass gap on each side
@willthethrill789
6 жыл бұрын
The 1x4s I had to cut at 3’6”
@getmeoutofiraq05
6 жыл бұрын
you are correct. i just made this bed also, and am having same issue. i havent put slats in yet. Is it okay with the width being 4 inches bigger than the mattress? do you fall in the gap?
@chelseadonell639
7 жыл бұрын
Also how often did u drill them side holes so they would line up
@mechammatt
7 жыл бұрын
+Chelsea Donell i just kind of guessed where to put the pocket holes.
@asmapowell2426
7 жыл бұрын
Hey Matt, if I wanted to add a ladder to this bunkbed design, what would you reccomend I use and do
@asmapowell2426
7 жыл бұрын
recommend*** sorry typo..
@asmapowell2426
7 жыл бұрын
Also Matt, after reading that you have extra space around the twin size mattresses...what can you recommend I do differently to avoid having the space because I would like a perfect or almost perfect mattress fit
@asmapowell2426
7 жыл бұрын
Thanks in advance!😊
@mechammatt
7 жыл бұрын
+Asma Powell you can have 2x4 added to one of the ends to make the ladder. I would measure your mattress and cut the boards to fit that. I believe you’d need to take about 1 3/4” off depending on your mattress. Hope this makes sense
@ikenuako7889
4 жыл бұрын
No ladder?
@Therealphantomzero
6 жыл бұрын
So from my understanding you didn't screw this bed to the wall right?
@mechammatt
6 жыл бұрын
Right. The bed is not attached to the wall.
@guanaco1626
6 жыл бұрын
Matt Mecham what size screws did you use?
@Erica-ff6sr
7 жыл бұрын
Are those just standard twin size mattresses?
@mechammatt
7 жыл бұрын
+Erica Boyd they are. I have extra room around the mattress. It's probably a little too much extra room
@brendagonzalez2095
7 жыл бұрын
Is this a full bed or twin bed? Thank you.
@mechammatt
7 жыл бұрын
+Brenda Gonzalez this is for a twin bed. I have extra space around the mattress for making the bed... probably too much space.
@raycollins7173
7 жыл бұрын
hey i think i seen you was from krum area where did you gofor lumber sorry if im wrong
@mechammatt
7 жыл бұрын
+Ray Collins I use to be around Denton. Right now I just get lumber from lowes.
@raycollins7173
7 жыл бұрын
that is where I am at is Denton.
@azuniga2005
4 жыл бұрын
What grit sand paper did you used??
@contritemarker2555
4 жыл бұрын
80 grit than 220
@ruthalon9323
4 жыл бұрын
Where are the stairs?
@mahmoudabukhadier5605
6 жыл бұрын
Seems like it could be very wobbly
@mechammatt
6 жыл бұрын
This bed has no wobble to it still.
@mahmoudabukhadier5605
6 жыл бұрын
Matt Mecham how much weight can the top support?
@mechammatt
6 жыл бұрын
I have put over 250 lbs up there no problem.
@DevinNerison
6 жыл бұрын
That was easy in US. Now living in Thailand. I see what you are doing,but in Thailand not so easy. Mostly concrete buildings here. If I built this I think pull on the concrete with a good hole, plastic setting and a screw may work if it is deep enough. We don't have studs, we don't have ground. CPU shocks me all the time.I got all this in Oregon. All the chop saws, air nailers. So what I say is you need to look at Thailand. People in a 1 bedroom with kids. How can we make it easier or more livable?
@ironman11880
2 жыл бұрын
that same lumber list costs $260+ today
@manny_f
2 жыл бұрын
*assuming you own a fully equipped workshop.
@Josh-ww5kz
2 ай бұрын
Not really. Could easily do this with just a pocket hole jig, drill, and a circular saw.
@asmapowell2426
7 жыл бұрын
😀
@biggnschristopher1378
2 жыл бұрын
5 years later and it's still less than 1000$
@matimorabeats
Жыл бұрын
Forgot something very important, the latter
@danluxton9672
2 жыл бұрын
It’s definitely not a 100$ build lmao almost 300$ worth of lumber you listed
@ohkurwa5187
3 жыл бұрын
Get a better mic.
@shoppewater241
6 жыл бұрын
you need to be pro fast builder so you can get fast subscribers!
@thomaswinkelspecht7912
3 жыл бұрын
music sucked
@garymeikle5482
7 жыл бұрын
Nice idea but could have save $40 on the lumber by halving the dimensions i.e. 1"x 4" and 1"x 5". It's for your two adorable boys . . . not baby elephants!
@mechammatt
7 жыл бұрын
+Gary Meikle I probably could have. But I like that it's strong enough to hold everyone on the top bunk.
@jonshaffer5793
6 жыл бұрын
Did you try nailing your wife on that? If so how did it hold up?
Пікірлер: 129