By far the finest build I have come across regarding ATX power supply conversion to a general bench power supply. Very well done!
@creativesolutions-diy
3 жыл бұрын
Thank you for your words!
@pjesapjes
3 жыл бұрын
agree !!
@futuratell3667
Жыл бұрын
Is this power supply within reasonable ripple output? Or would it benefit from further reduction of dc ripple.
@TheWtss
3 жыл бұрын
I just watched your build and found it very interesting for my level of electronics.(LOW)!!! For my level and a lot of other people’s level this is a great job to learn how to work with the parts and such to put them together. I also read a lot of the comments and it seems a lot of people seem to forget about us uneducated learners. We need these jobs to learn from.
@creativesolutions-diy
3 жыл бұрын
Thank you and I absolutely agree with you!
@veeem3964
Жыл бұрын
Only you know what ur doing ……. The video is too fast and not showing step by step clearly
@josephnavarro3620
2 ай бұрын
It looks like he had a project link in the description that's not working for me at least. Really cool power supply tho
@mr.makeit4037
3 жыл бұрын
Outstanding! Liked the addition of another potentiometer to fine tune your voltage. I'm choosing your schematic to build mine.
@creativesolutions-diy
3 жыл бұрын
Yeah! The fine tune is very useful!
@aswingsharif6729
2 жыл бұрын
The good: 1. enlist the components and their buying links 2. motivating viewer to build one. The bad:1. Fast forward of full time to build this, since you are too lazy to edit. If you edit unused steps you can run the video in normal speed and viewer can understand better the steps 2. No explanation on what are you doing on particular time 3. No knowledge sharing about which atx cable used and unused, the boost buck module and R shunt, etc 4. Background music represent low confidence level on the video quality while your video is actually good. See for a good example: DIY PERKS, no music, full explanation. 5. At least: SUBTITLE ON EACH STEPS would be appreciated.
@collinrohwer1790
Жыл бұрын
+1 music is killing me. At least dont monetize and force us ads and length if its gonna be straight through. Cool build tho
@Comrade_YG
Жыл бұрын
@@collinrohwer1790 the music in the video even that bad compared to other indian diy ers
@LeftyPem
Жыл бұрын
Also, no smoothing caps on the lines. This video is a beginners overview at best, and a hazardous waste of time and parts at worst.
@tiberiuoros9733
3 жыл бұрын
You are right Mr. Rick McCaskill, "this is the best version I have seen". Excelent Project.
@creativesolutions-diy
3 жыл бұрын
Thank you Tiberiu Oros!
@rickmccaskill7888
3 жыл бұрын
This is the best version I have seen. Thanks for sharing.
@creativesolutions-diy
3 жыл бұрын
Thank you very much!
@helijim
3 жыл бұрын
"In this video I will show you in great detail, how to create your own bench power supply from a old PC power supply." *Says nothing and plays music.
@chrislewis2262
3 жыл бұрын
A tip on soldering, tin the wire first and what you are soldering the wire to. It makes for a better and stronger solder joint. Also avoid what's called "cold joints" if there is not a shine on it when it cools then redo it. Poor joints can break easily.
@cuentos.narrados
3 жыл бұрын
This is THE diy power supply, look no further. I used your fine adjustment pot solution for mine. I had a problem bc i didnt use the same dc dc converter so i had to use a boost one and a buck one, in top of that i needed -12v with at least 5 amp (for chip power amp test, like 3116d2) so i had to use 2 pc smps in series, but it turn out well, i used an old (really old) dual cassette deck as enclosure. Thank you very much for the tips.
@geniltonmathias9885
3 жыл бұрын
Foi a melhor fonte de bancada caseira que eu já vi
@creativesolutions-diy
3 жыл бұрын
Obrigado Genilton ;-p
@alvaroamorim6344
6 ай бұрын
@geniltonmathias9885 Você poderia compartilhar o que baixou? Não está mais disponível
@lorenzo.c
3 жыл бұрын
If I have to pick on something, you should have shorted DATA+ and DATA- on the USB host connectors you want to be detected as "AC Charger" mode. Also I'm a bit uncomfortable on exposing GND as the VCC of the USB port you power from the -5V rail but that's probably just me. By the way, I think the quality of the video is great (I particularly liked how you edited the sound)
@creativesolutions-diy
3 жыл бұрын
Thank you for the tip, I will investigate the short DATA+ and DATA-. If you are a bit uncomfortable on exposing GND as VCC, you can use the normal 5V (red wire) for usb as well. Thank you for watching!
@lorenzo.c
3 жыл бұрын
@@creativesolutions-diy , the standard to refer to is Battery Charging v1.2 Specifications for USB 2.0. The core of the matter is that USB 2.0 made USB an interface which could also deliver power (more than 500mA) and deliver just power. In order to make it possible for devices to understand if the cable that had been plugged in could source more than the old 500mA and, at the same time, for the manufacturer of PSU to keep making reliable but cheap 5V units with only a change of connector the BC Spec standard defined having DATA+ and DATA- shorted as the solution. You can use an app like Ampere on a phone: when the phone detects a "dumb" charger the app says "AC Charger", when the phone detects an host which can communicate (but is not expected to deliver more than 500mA) then the app will say "USB Charger". My "discomfort" about grounds comes from these considerations: if you were to power two devices from these two USB ports and those two devices ended up being electrically connected in some way, then the "GND" in each of them would actually be 5V apart and the consequences would be bad. I admit it's unlikely but here is the designer of electronics thinking about what could go wrong rather than the tinkerer. Thank you for the video and keep up the good work.
@remigiosalazar9133
2 жыл бұрын
If you didn't want to be copied in your work, you haved complete success!!!!Congratulations!!!
@MultigunaK_nci
2 жыл бұрын
Terimakasih atas Tutorialnya, sangat Kreatif sekali, membuat Power suply variabel, Salam Kenal KAK, Sukses selalu yah 👍
@ImanolLopez
8 ай бұрын
Este video fue publicado hace 2 años pero espero que me puedan responder. Se puede hacer con cualquier fuente de alimentacion? Porque algunas varian con la cantidar de potencia que ofrecen...
@FiestaWarfare
3 жыл бұрын
Great work. But you didn't test current potentiometer I was expecting :( Can u tell your test results at 24-30V. Any issue? Like voltage drop and is it safe to use these usb's for charging smartphones? Thanks.
@anonimuso
3 жыл бұрын
Very creative solution to use the PSU case itself as the main case. Also, nice work on including USB outputs.
@videotronicmaker
3 жыл бұрын
Others have made atx workbench power supply videos and you still came up with something new. Great job coming up with modifications and a really nice label in front. Well done! How many amps are you able to get out of the variable side?
@creativesolutions-diy
3 жыл бұрын
The max amps you are able to get in the variable side depends the DC-DC module. The module that I used I can get 4 amps maximum. Thank you!
@Georges-MILLION
3 жыл бұрын
Une alimentation très bien faite ! Bravo . A very well done diet ! Well done .
@creativesolutions-diy
3 жыл бұрын
Thank you very much!
@Yungtubo88
3 жыл бұрын
The hardest part for me would be forming those holes on the front panel. Not everybody is equipped with the right tools to make and smooth out those holes.
@bennylloyd-willner9667
3 жыл бұрын
Well done, I have now done one of my two tasks thanks to this : 1) Find a good makestuff channel to subscribe to - Check! 2) Make an ATX lab power supply - will do soon!
@bobgreene2892
3 жыл бұрын
It would help viewers to see the process broken into stages, with identification of each and a general explanation of what you did-- and why.
@creativesolutions-diy
3 жыл бұрын
Thank you Bob, I will broke the video into stages
@EffTwoFiddy
3 жыл бұрын
would love to see this as well... and agree with everyone else that this is by far the best build i have seen, need more info...
@gorkemgolpek6659
3 жыл бұрын
@@creativesolutions-diyI see how confident and comfortable you are working your way around that ATX Power Supply .But I don't think many of us have those hand tools you have in your service. 1-) Converting the power supply into bench power supply is the seen part of an iceberg which you successfully demonstrate in this accelerated video in a fashionably manner It would have been time bound otherwise. 2-) Being able to acquire and use those hand tools comes with a territory. I feel I must say I agree with Bob! This outstanding project could have been more productive should you at least put the tailored version of this footage put into stages that progressively explain the whole process step by step. Could you possibly upload the slowed down and the shorter version of this video on your website for slow learners and serious builders like me! Thank you!
@JasonOfTheB
3 жыл бұрын
The USB connected to the - 5V rail is a really bad idea. It gives you some more amps, but also a GND that is on -5V compared to the other GND in the same device. If you use more than one supply for a single device, you create a nice short and could burn through your cabling or even destroy the power supply
@creativesolutions-diy
3 жыл бұрын
You are right, it's not a good idea, but usually the usb port it's not used to power a device together with another output. But yes, the best it's use the +5v instead of -5v
@JasonOfTheB
3 жыл бұрын
@@creativesolutions-diy have you ever seen the split power cables to power external hdd since one port would not allow enough power if it is compliant with the spec? Yeah I've got multiple of these for different applications
@MilanGajicBuva
3 жыл бұрын
that is a really nice and solid power supply. i'd pay money for that
@creativesolutions-diy
3 жыл бұрын
Thank you Milan!
@Buzzhumma
3 жыл бұрын
It would be great if you turned a cheap inverter welder into a power supply as they are very robust by the nature of their design !
@creativesolutions-diy
3 жыл бұрын
I will investigate this :-p
@Buzzhumma
3 жыл бұрын
@@creativesolutions-diy great 👍🏻 i think its a wortgwhile pursuit !!
@change_your_oil_regularly4287
3 жыл бұрын
Great work! Probably the best atx bench supply build I've seen! Tip my hat 🎩
@creativesolutions-diy
3 жыл бұрын
Thank you very much!
@markdantes585
3 жыл бұрын
Lo que más me gusto es la explicación, nos da paso a paso los detalles para realizar el proyecto muy mal
@kevinbaker2470
2 жыл бұрын
Nice work, I think you would love a dye grinder, you could replace most the tools used here and save time. I love mine, wish I had an excuse to use it more.
@MrOziwizi
3 жыл бұрын
Hi, I have a similar psu without green cable and a gray cable, can you please advise what you do with the gray cable, did you just cut it away? And what is the resistor type you are using? It would be nice if you can put the details on the video.
@paulmccullough7352
2 жыл бұрын
Dude, he did put the resistor value in the video. not to mention that multiple people have mentioned it in the comments as well.
@fieroboom
3 жыл бұрын
Best ATX build I've seen so far - beautiful!! 👍👍
@diegofr5178
3 жыл бұрын
Me ha gustado mucho el video. la mejor idea para fabricar fuente de laboratorio que he visto. Estoy deseando ver mas contenido. ¡¡¡ ANIMO !!!
@creativesolutions-diy
3 жыл бұрын
Thank you!
@MahdiShraim
2 ай бұрын
It is really an impressive work! thank you. I want to ask you about the custom label that you made for the outputs, can you upload it ? I want to print it and use it.
@ThreenaddiesRexMegistus
3 жыл бұрын
Nice job! Far better than mine. Going to build another with a step-up and this ones got a nice layout.
@davidcormier5560
3 жыл бұрын
Hello, first congratulations and thank you for this great video.at 11:26, for the potentiometer 1 K you do not solder the wires in the same order as on the diagram, is there an error on the diagram? (video: orange, white, brown / diagram:brown, white, orange).
@giladit77
3 жыл бұрын
A very beautiful project. I'm going to make one based on what you did. Very professional and beautiful work !!! Keep up the good work with more projects. Waiting to see what you will prepare for us in the future. 👏👏👏
@creativesolutions-diy
3 жыл бұрын
Thank you very much! I'm working on the new project right now, so be aware 😉
@tpobrienjr
3 жыл бұрын
Great skill in metalwork. Thanks for showing a nice ATX conversion project.
@DAROS21Q
2 жыл бұрын
Por MAS Y NUEVOS videos sobre HERRAMIENTAS caseras para el taller de electronica Nuevo suscriptor desde Argentina Bs As
@2010stoof
5 күн бұрын
Whats the awg of the wires you used for the power connectors and ground?
@ala_philip4340
3 жыл бұрын
It's a perfect project. Great job. Could you tell me if I will use ATX 350W with the same equipment? It will be worked?
@creativesolutions-diy
3 жыл бұрын
Absolutely yes!
@peddersoldchap
10 ай бұрын
Muito bom vídeo. Pena não dar para ver o valor da corrente máxima seleccionada. Mas suponho que começando com uma corrente baixa e depois ir aumentando não deve danificar o circuito?
@mhd945
2 жыл бұрын
Hello there, is there a possible way to get those stickers you used in the beginning of the video? A pdf would be sufficient! Thanks!
@Illutorium
2 жыл бұрын
5:16 When so it's a must be location at 12V or can be location of a Chip if are be about of 0-30V (When so I do be know then Additonal USB's with Module can be so useless if are be for "USB Standby only")
@dalwindersingh2322
3 жыл бұрын
Thank you! Good job on making the video easy to follow and great details for others who want to try this too.
@creativesolutions-diy
3 жыл бұрын
Thank you very much!
@alvaroamorim6344
6 ай бұрын
@dalwindersingh2322 Could you share what you downloaded? It is no longer available
@dalwindersingh2322
6 ай бұрын
@@alvaroamorim6344 Sorry I do not have any downloads related to this project.
@sinabakhtiari9309
3 жыл бұрын
Hello, I am Iranian. Iove your videos. And I really liked the design uoy did for power. Can you send me the program with which you designed that label, please or tell me its name?
@creativesolutions-diy
3 жыл бұрын
Hi, I used the DaVinci Resolve
@sinabakhtiari9309
3 жыл бұрын
@@creativesolutions-diy Hello, this does not work
@haideur
Жыл бұрын
good DIY but you need to chose your background music next time not a stressfull rythm music
@__--JY-Moe--__
3 жыл бұрын
yup.. the direct machine noise is just great...how does this guy still have all his fingers? great vid...
@danibiomedicalengineer860
3 жыл бұрын
😀 👏👏👏 Very well presented. Best ever project from old smps . Mind blowing !!!
@creativesolutions-diy
3 жыл бұрын
Thank you very much!
@user-cp4is2ih7h
3 жыл бұрын
노이즈 측정기 아니가요 영상감사합니다 대단해요
@GameBacardi
3 жыл бұрын
In the past, some young kid died while he opened power supply. There are big capacitors which hold high voltage, those need to dicharge before you start play with your life.
@k1ortia
3 жыл бұрын
That,s what i thought, surely a video like this would state clearly...CAPACITORS CAN BE DEADLY. DO NOT TOUCH THEM!..??
@RobinsonDanieldosSantos
3 жыл бұрын
Gostei Rui, vou montar uma igual! Parabéns pelo projeto.
@creativesolutions-diy
3 жыл бұрын
Muito obrigado Robinson, assim que terminar tire uma foto que terei todo o gosto de partilhar no canal ;-)
@ubermick4208
3 жыл бұрын
Excellent tutorial but cannot for the life of me get the power switch LED to illuminate. It seems you have the voltage + going to the common pole on the switch, with ground in the centre pole, and then green on the top. Which makes sense, when the switch is thrown, connects the ground and green to kick the PSU on. But the LED is pole sensitive, so needs the + on the switched side, I think? I mean, the switch itself works, soon as I activate it I get power to the fan, and the orange/red/yellow wires read 3.3/5/12 volts.
@armandodenaro5406
2 жыл бұрын
Ciao ho anche io lo stesso problema. Ho seguito attentamente sia lo schema che il video ma azionando l'interruttore funziona tutto tranne il led. Nel video sembra funzionare ma in realtà no. Tu hai risolto? Ti sarei grato se mi dici come. GRAZIE
@laserowy_gniew_dzidy
Жыл бұрын
Could you explain why the usb ports are connected like this? Why same gnd is connected to gnd in one and to vcc in another one?
@ludis7128
3 жыл бұрын
Wow this is a really great idea. Nice job. I'm making one
@edgarnino1537
3 жыл бұрын
Gracias por la información. Pregunta. De cuantos homios son los potenciometros. Soy aficionado Gracias
Muito bom seu projeto ... também fiz uma , essa semana farei outra em outro estilo . parabéns pelo projeto
@rodrigopedrosa5222
Жыл бұрын
amigo vc tem os arquivo para imprimi
@rosshollinger8097
3 жыл бұрын
Could you repost this with some narration and at normal speed? These MTV, Alvin and the Chipmonks videos are annoying. Sad thing is, you probably have something substantive to teach.
@creativesolutions-diy
3 жыл бұрын
Unfortunately I can't post the video at normal speed because I no longer have the original source videos :( But I will take it in mind in the next videos :-)
@speedmasteriv1
3 ай бұрын
This is really a very nice power supply. Could you maybe please email me the print files for the front cover?
@pawedymaa1592
6 ай бұрын
Hi why did you connect the Usb to the -5v? The second was connected to the +5v stb but how much amp you get on this line ?
@stevedickson4744
Жыл бұрын
this is a great idea, but it's pretty intrusive and parts-intensive. What if you made this as an external add-on that would just clip onto the existing ATX connector of any such PC power supply ?
@ZzSlumberzZ
Жыл бұрын
there are modules that do just that, minus the fine tuning.
@batticha462
3 жыл бұрын
Very nice, the "Old ATX" power supply is new :)
@creativesolutions-diy
3 жыл бұрын
Thank you!
@ronyd...1310
2 жыл бұрын
Excelente aporte ojala sigas con mas proyectos para el taller....version casera. 👌
@andreabenedetti5891
3 жыл бұрын
Great job. I have a question about the roket 3 pole led switch. Can you explain how it works? It is a led with polarity it seems doesent work in realtà but only in video
@mattrowe1229
3 жыл бұрын
where did you come up with the software or what did you use to make the design for your sticker, knobs, controls and such, lettering, numbers.
@creativesolutions-diy
3 жыл бұрын
Paintnet haaaaaa
@alvaroamorim6344
6 ай бұрын
@mattrowe1229 Could you share what you downloaded? It is no longer available
@caztroll
2 жыл бұрын
I have had a go at making one. Tested it all working great with original pots on the board, but once I extended out to the 3 front pots, then the smoke leaked out! Your website is down. I tried to access to check details. I had to rely on stopping video and getting scratchy pictures. Back to Ali express to order another 0-30v board
@georgelkhiangte7524
Жыл бұрын
Why is resistor 10 watt/ 10 ohms necessary to connect with Ground and 5v+?
@robertthompson5163
3 жыл бұрын
Very nice build. I have question could I use a 12v cooling fan in place of a dummy load?
@creativesolutions-diy
3 жыл бұрын
I think it is better to doesn't use a fan, because it has a very low resistance....
@cescastellanos
3 жыл бұрын
Excellent Work!!! I have 2 question. ¿the dc-dc module can adjust the supplied current?? and the other question : that dc-dc module can supply (elevate) the voltage more than the 12v from the ATX??
@edujoca
3 жыл бұрын
Muito bom,uma fonte para a bancada excelente
@creativesolutions-diy
3 жыл бұрын
Obrigado!
@ladislavleng172
3 жыл бұрын
Hello Very good and precise work. Accept recognition from Slovakia, Košice. Everything good
@adamsucksatyt
3 жыл бұрын
Ahoj
@zzss9595
2 жыл бұрын
Hello, we have an agricultural land that has no electricity. Now, if we want to use a motorcycle battery, which is 12 volts, to get different currents, such as 10 or 12 amps, what transistor should we use?
@cookies-pb1eg9vg8v
7 ай бұрын
Only 'Flash' can understand
@keith_ferdinanduz
2 ай бұрын
You can decrease the playback speed though...
@bgable7707
3 жыл бұрын
Potentiometer wiring on the schematic, I'm not sure about the orientation of the new pots and which post should be 1, 2, 3. On the converter PCB, I'm counting left to right, with the square "through hole" as 1 on the left. On the New pots, looking at them with the post pointing toward me, the images I've found, are labeled 1 to 3, left to right. Is that the way you meant in the diagram or reversed? Thanks, I'm looking forward to completing this! Looks great.
@TheSleepyCraftsman
3 жыл бұрын
Very impressive. Great job!
@creativesolutions-diy
3 жыл бұрын
Thank you
@wolfwer7859
3 жыл бұрын
Отличное видео, все просто и понятно. Спасибо.
@johnmacedo4483
3 жыл бұрын
Excellent Project. One of, in not THE, finest Power Supply builds i have seen. Is it possible to replace the 2K and 1K potentiometers with two 5k or two 1k linear potentiometers? Keep up the great work. Best regards
@creativesolutions-diy
3 жыл бұрын
No it isn’t. You need to use the same potentiometers there are in the DC-DC converter that you will use. I only added a little 2K potentiometer in serie with 50K to allow the fine voltage adjustment. Thank you!
@johnmacedo4483
3 жыл бұрын
@@creativesolutions-diy: Hello again Rui. Do you have the the background image in an editable format so that i may change the color scheme? Like Coreldraw, for example? Thank very much. Cheers...
@rogueriver
2 жыл бұрын
Are there any potential problems with using multiple ports at the same time? e.g. supply an arduino on one of the lower fixed voltages and maybe cpu fan drawing .5-1A on fixed 12V and another load on the variable voltage and making sure all this adds up below the rated specs
@gopinathkundu8845
3 жыл бұрын
Keep it up bro 👍🏻👍🏻 Love from UK ❤️❤️
@creativesolutions-diy
3 жыл бұрын
Thank you!
@John-sh7rh
2 жыл бұрын
The project link is not working! Would like to print the stickers out. Help!
@jairoregalado
3 жыл бұрын
Muy buena, y muy bien presentada pero q pasa si la carga entra en corto en la salida de 5v, o la de 3.3, o tal vez la de 12v, bien la fuente se protege pero y la carga se quema.
@fabOgraphe
3 жыл бұрын
Great DIY, Is it possible to have the first sticker with diameter before to drill the holes or to cut the metal ?
@kieranberryman984
3 жыл бұрын
Great video. What's your wiring for the LED rocker switch? Black for Ground, Green for + but what wire for the centre ACC post to make the LED light? Red?
@redcomgeng3010
3 жыл бұрын
yes.. led not function..
@santdnyaneshwar9920
3 ай бұрын
👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻Background music mixed unnecessarily in videos and you spoiled your videos yourself by mixing music in it. 👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻 Closed immediately due to background music..
@user-oq9co8lp9o
3 жыл бұрын
Оригинальное решение. Спасибо.
@LordAnubis0909
3 жыл бұрын
nice video but just warning connecting USB ports like this (it will work) but some devices are making problems when charging. (learned it the hard way :) )
@luis46coco
3 жыл бұрын
Everything is very good, but I have 2 questions, what is the 10w resistance 10 homnios for, I am not an expert in electronics, but does it seem almost a short circuit in the 5V line? And the usbs I understand that they need some resistors on the data pins so that the device (cell phone) takes 1A or 2A if they do not have those special voltages on the data legs it only takes 0.5A
@lmanghg1257
3 жыл бұрын
The 10ohm10W res. function as a dummy load. Some ATX PSU won't start (turn on) if there is no load.
@creativesolutions-diy
3 жыл бұрын
You are right, if you will use the usb port to charge the cell phone you can short the -Data with +Data pins. The 10w 10ohm resistor is for dummy load because computer PSU style supplies need some load to work properly, otherwise they sometimes wont start or output voltages fluctuate.
@ishfaqtanoli2012
2 жыл бұрын
Very Fast video .Circuit Daigram not shown. why ? This video not useful without diagram.
@ThinkingBetter
3 жыл бұрын
Gosh you need a Dremel toolbox.
@creativesolutions-diy
3 жыл бұрын
I already have one, but I didn't remember to use it xD
@allothernamesbutthis
3 жыл бұрын
@@creativesolutions-diy usually the case of not being able to find the bit or tools until after you complete the job using something different!
@Vizimech
3 жыл бұрын
What are those snips you used to cut the metal?
@riggziestrains8082
3 жыл бұрын
Very well done but instead of music.. talking through it would be better.
@gvinrad
2 жыл бұрын
What's the function of the small blue PCB you added with the large wire wound ferrite ring & where did you purchase it from ?
@regpye
3 жыл бұрын
Is the wiring correct for the USB sockets? One seems to be wired the opposite polarity to the other one.
@lizzielecates4430
3 жыл бұрын
Nice, how is the current adjustment on this? Do you need to disconnect and short first or can you do it in situ?
@paulpeterson7853
3 жыл бұрын
Nice Build!
@RC-Heli835
Жыл бұрын
This looks amazing!
@wilmercb
2 жыл бұрын
What's the name of the orange wire/cramper you're using and any good recommendation for a soldering station? Thanks
@blazko9367
3 жыл бұрын
Hello, I have a question on the switch wiring : if the green and the black wire are connected, the pc power supply should be ON, but if we change the switch state the 5V is directly connecter on the GND... isn't it dangerous ? That's a big question I have : why do we have a 5V on the switch, because wiring the green and black wire together should be sufficient to have the power supply activated. Thanks for the possible answers !
@lecontefaycke5396
3 жыл бұрын
I think the 5 volts of the switch is only used to power the led
@alvaroamorim6344
6 ай бұрын
Olá, o Project link não está abrindo, está sendo redirecionado para outro domínio e que o Norton diz que a página é maliciosa. Poderia verificar ?
@thedigy1
10 ай бұрын
Hello, i love the proyect and i what to make it for my father. May i ask you the file for the vinyl design? The proyect link doesnt work. Thnks!!!
@pomboelectrico
3 жыл бұрын
Subscrito! É bom ver conteúdos desta qualidade feitos em Portugal. Parabéns
@creativesolutions-diy
3 жыл бұрын
Obrigado David, já estou a preparar os próximos ;-p
@alvaroamorim6344
6 ай бұрын
@pomboelectrico Você poderia compartilhar o que baixou? Não está mais disponível
@christopherthorn1906
3 жыл бұрын
Great video! I am gathering the parts to build my own. Question: I don't understand the purpose of the 10 ohm 10 watt resistor across the 5volt line. I have seen this in other designs. Thanks.
@Tegelane5
3 жыл бұрын
Computer PSU style supplies need some load to work properly, otherwise they sometimes wont start or output voltages fluctuate. So this resistor is that load.
@christopherthorn1906
3 жыл бұрын
@@Tegelane5 Thanks
@creativesolutions-diy
3 жыл бұрын
Good answer Tegelane5
@waltervaldivia2399
3 жыл бұрын
Nice project, it's was grate to watch how you build it. 👍👍
@creativesolutions-diy
3 жыл бұрын
Thank you!
@alvaroamorim6344
6 ай бұрын
@waltervaldivia239 Could you share what you downloaded? It is no longer available
Пікірлер: 466