I've looked at many others and actually this setup fits my purpose the best. Really like this. I'm making one once it starts snowing. Thanks for sharing
@mystuffedgarage9907
Жыл бұрын
Glad it was helpful!
@aaronortiz4
9 ай бұрын
it looks really cool, I'm making mine tomorrow... Thank you
@scottss213
2 ай бұрын
That turned out great thanks for the video
@PM13501
Жыл бұрын
Great video and a very practical DIY project!
@mystuffedgarage9907
Жыл бұрын
Thank you very much!
@dennismbrandi
2 жыл бұрын
That trick with the speed square don’t know why after all these years I never thought of it it’s so stupid it’s brilliant keep up the good work project looks good
@mystuffedgarage9907
2 жыл бұрын
Thanks for the call out Dennis!
@spitzerone
Жыл бұрын
I too have Dewalt tools so this would work for me. I think that in addition to this I want to make it a charging station so all the tools, batteries, and chargers are at one station. Thanks. Nice video.
@mrmyblessednest1722
2 жыл бұрын
A great build! Thanks for sharing! Also thanks for sharing the measurements at the end!
@mystuffedgarage9907
2 жыл бұрын
Very welcome! This tool organizer has been a huge success. I’ve just about have all my friends hooked up with one. Let me also tell you the amount of time I save not hunting around or digging through drawers trying to find the right power tool. It truly has been a life saver! Thanks again for taking the time to comment!
@mrmyblessednest1722
2 жыл бұрын
@@mystuffedgarage9907 I’ve made and sold a couple that held 5 tools and I’ve made and sold 1 that held 10 tools, 5 across double stacked!
@831today8
2 жыл бұрын
I'm so sorry but where are the measurements? I would love to make this for fathers day for my dad...or at least tempt to, lol🤣 I would live cut dimensions if possible. Great video!
@mystuffedgarage9907
2 жыл бұрын
End of the video
@mystuffedgarage9907
2 жыл бұрын
19:28 have pictures of measurements
@paulnipper4071
Жыл бұрын
Nice setup .... it has inspired me
@mystuffedgarage9907
Жыл бұрын
Thank you very much. It’s been a huge life saver. Organization saves time which in turn safe money!! Whoop whoop!!
@jeffreywhite7657
5 ай бұрын
I like your build. I really need to do this as well. I just may make a trip to Menards! 😅
@mystuffedgarage9907
5 ай бұрын
Excellent! Thanks for watching!
@rossrobichaux9425
2 жыл бұрын
Looks good
@mystuffedgarage9907
2 жыл бұрын
Thanks man!
@ahmedgazey1221
Жыл бұрын
احيك الغالي من العراق
@davkenrem
9 ай бұрын
Great music!!
@psherman36
Жыл бұрын
I'd try making one change, not to the cabinet but the way you are storing the tools in it. If you store the racked tools facing the other way, you can instantly see what the tool is.
@mystuffedgarage9907
Жыл бұрын
Great suggestion, one problem though I don’t ever take the drill bits out of my drills so I’d more than likely end up with a couple extra holes in my fingers. Lol I have designated spots for each tool so I know which one too grab (usually). Awesome suggestion! Really appreciate you watching my video.
@anrwhitehead
Жыл бұрын
Little tip I've used, write on the bora straight edge the amount to subtract, like my cordless saw is 1.25". So it's written by the lever in marker. I know what if..., then you get some wd40 and erase it, or draw a line thru it, and write a new one.
@mystuffedgarage9907
Жыл бұрын
That’s a wonderful tip thank you so much for sharing!!!
@stevebuteux8218
Ай бұрын
this is great and I'm hoping to build one for myself. I saw the dimensions at the end but didn't catch or see how deep it is. can you tell me? thanks very much
@stevebuteux8218
Ай бұрын
thanks, I just saw it was 9 inches
@tobytootimes7639
2 жыл бұрын
My favorite part is when he wipes the glue off the joint and then just smears it on the top op the board a few inches away from where he wiped it. Boss.
@mystuffedgarage9907
2 жыл бұрын
As long as I bring a smile! Lol
@madsthorhauge234
Жыл бұрын
Mine too😅🤣🤣🤣
@moridmerat9029
Жыл бұрын
Hi Thanks for this video, I want to make the same, buy have two questions: what type of plywood did you use and what is the depth size of racks? Thanks
@mystuffedgarage9907
Жыл бұрын
Sanded plywood and 9" on the depth.
@bruceli887
Жыл бұрын
Are there plans for this & dimensions?
@StudCity718
Жыл бұрын
What did you use to hang it up on the wall to support all the weight? Did you make a cleat?
@mystuffedgarage9907
Жыл бұрын
I screwed it directly to studs.
@zyciejestpiekne1988
3 ай бұрын
Good job ❤
@marc-antoinenicolas9569
Жыл бұрын
Thanck You for youtube cotations
@skipmidgett6189
Жыл бұрын
Do you have any plans for it that show all the dimensions for each board?
@mystuffedgarage9907
Жыл бұрын
If you pause the video @ 19:28 I've got all the measurements. 9" for the depth.
@chrisrieger9201
6 ай бұрын
What was the name of that clamp square you used for the saw
@mystuffedgarage9907
6 ай бұрын
It’s part of the bora guide rail system.
@dclmac
Жыл бұрын
What was that tool called @1:38? Didn't catch what you said. Also, where do you get it from?
@mystuffedgarage9907
Жыл бұрын
It's a bora 100" clamp edge.
@PM13501
Жыл бұрын
I cannot come with any smart question that has not already been asked!!
@StudCity718
2 жыл бұрын
What thickness plywood did you use?
@mystuffedgarage9907
2 жыл бұрын
I used 3/4” but 1/2” would work just fine. I just happen to have the 3/4 left over from another project. Thanks for taking the time to watch the video.
@StudCity718
2 жыл бұрын
@@mystuffedgarage9907 sounds good. Was looking at the Ryobi and Kobalt steel ones but, seems like a fun project to build. Thanks alot.
@KikaWaiAlae
Жыл бұрын
What is the name of that guide? Is there a link to purchase it
@mystuffedgarage9907
Жыл бұрын
100-in WTX Bar Clamp www.lowes.com/pd/BORA-WTX-Clamp/1002792414
@mystuffedgarage9907
Жыл бұрын
I think that’s what your asking?
@JackInTheShop
Жыл бұрын
I always use gorilla glue. I can get it anywhere. Dollar General is just like 2 blocks down the road. They have gorilla glue. It works on my projects. As long as it holds up to normal use, I don't see the point of seeing witch one is stronger. Cheap and it works is all that matters to me.
@mystuffedgarage9907
Жыл бұрын
I have the same thoughts as it seems the majority of these company’s are you the same formula or even made by the same manufacturer and then relabeled.
@sandykoltiska858
Жыл бұрын
I don't see dimensions for the boards you cut
@sandykoltiska858
Жыл бұрын
Especially for the width
@mystuffedgarage9907
Жыл бұрын
If you pause the video @ 19:28 I've got all the measurements. 9" for the depth.
@gailwilliams9084
5 ай бұрын
If you would turn your nailer 90 degrees you wouldn't get so many blowouts.
@mystuffedgarage9907
5 ай бұрын
Great call out! You would think I would have figured that out after the 100th blow out!! Thank for watching!!
@gailwilliams9084
5 ай бұрын
Loved the build and do you think it would do well on a french cleat? @@mystuffedgarage9907
@waynemiller6070
3 ай бұрын
Yeah, if you look closely at the nails. They are sharpened on one side only. That leads them to curve in the opposite direction. So, if you need them to go One Direction or another, you could actually put the nails in the gun going One Direction or the other.
@ryanbigler4850
9 ай бұрын
What are the dimensions of this build? Thanks.
@supergirl2997
Жыл бұрын
Would cheaper and lighter to just buy one off Amazon.
@mystuffedgarage9907
Жыл бұрын
This was made of scraps around the house and holds way more than anyone I’ve ever found on Amazon. But to each his own appreciate you taking the time to leave a comment.
@joemarchesani8455
Жыл бұрын
@@mystuffedgarage9907 wouldn't be any fun to buy it on Amazon! Great job!
@yakkytory8236
Жыл бұрын
Good video, but the music is asinine and distracting. Keep up the good work!
@mystuffedgarage9907
Жыл бұрын
Wife says the same thing well noted! :)
@abby2674
Жыл бұрын
Sounds like porn music.
@bart3877
Жыл бұрын
all good except the incredibly annoying elevator music
@mystuffedgarage9907
Жыл бұрын
Totally understand!
@user-kk6if6hp2p
6 ай бұрын
Bro you’re frustrating to watch slower than death
@mystuffedgarage9907
6 ай бұрын
No one forced you to watch but thanks for spending time to write a comment!
Пікірлер: 73