Isopropyl alcohol 91% or higher to give you the dispersing effect and cells, after that evaporates we spray denatured alcohol to release any trapped air and pop any bubbles.
@bouncybear8842
2 жыл бұрын
question: how do you do back splash boards?
@LeggariProducts
2 жыл бұрын
Email customerservice@leggari.com They will be able to help you with your questions!
@patriciavalencia3016
2 жыл бұрын
una pregunta me puede decir cómo se llama es spray que le echa a lo último?
@FlyEaglesFly19111
2 жыл бұрын
What type of countertop did you start with? It looked pretty shiny?
@LeggariProducts
2 жыл бұрын
That is a kitchen set we are constantly coating over existing epoxy pours.
@healingjourneys4241
2 жыл бұрын
Question: How do you fix a bump in your epoxy? Finished the pour and there is a pinpoint bump in my countertop. I just poured yesterday and was planning to top coat today with a matte finish. Wondering if I can lightly sand the spot and then do the matte top coat? Alternatively, would I need to sand and re-coat the entire counter with epoxy then top coat? The spot is so tiny I want the easiest fix.
@LeggariProducts
2 жыл бұрын
Yes sorry for the late response I hope you just lightly sanded with like 320 and top coated if it is just a tiny pinhole!
@redepoxyart5857
2 жыл бұрын
Viri god
@salnarducci
2 жыл бұрын
Do you use MDF for the counter tops?
@LeggariProducts
2 жыл бұрын
Yes, 2 layers of 3/4" MDF is what we recommend when building your counter.
@alssaw308
2 жыл бұрын
Hi guys I want to study it. How can I do it?
@LeggariProducts
2 жыл бұрын
leggari online academy coming soon!
@themoos8
2 жыл бұрын
Alcool isopropyl and denature alcohol do you have to use both or can you only use isopropyl !?
@LeggariProducts
2 жыл бұрын
Always spray denature alcohol at the end to release any air and pop any bubbles. You do not have to use the isopropyl if you don't want the dispersing effect and all the cells.
@ragoubfarid9890
2 жыл бұрын
Good job (I am from Algeria, give us a translation in Arabic, and this is a good job)
@galady8632
2 жыл бұрын
Ragoub Farid - I have read that viewers can go into KZitem settings and select your preferred language.
@lailaabir8698
2 жыл бұрын
@@galady8632 not on the app only on the browser i think
@LeggariProducts
2 жыл бұрын
Thank You!
@buba9313
2 жыл бұрын
Hello!!! I am from distant Kazakhstan. and I was very parasitic, your work is very beautiful and effective. the thing is, I want to do this resin casting business as a business. and I have some questions about this case. I think you can tell me I will be very grateful to you ... here is the first question. what is the most optimal fill layer per square meter ??? for tables and countertops (layer thickness) and the second question of interest to me. how much does such work cost per square meter? I understand that we are far from each other. but still. I will be very grateful if you answer me. and I wrote this text via Google translator. sorry if that !!!!
@loiswhipkey8840
2 жыл бұрын
Can you pour this over a plywood base?
@LeggariProducts
2 жыл бұрын
Yes, we recommend 2 layers of 3/4” MDF if you are building your countertop!
Пікірлер: 28