Michael is ALWAYS SAS-SYY. One of the many reasons we love him so much. 😁
@stephaniebarcikowski5171
2 жыл бұрын
You were in a funny mood, love it! Great project, too!
@nonyabidnazz7487
2 жыл бұрын
HIGH from the Cali coast!! 💜
@craftynet
2 жыл бұрын
Hiya!!! :)
@christinahaney5585
2 жыл бұрын
I haven't been getting to see these because of my work schedule. Mandatory over time.
@craftynet
2 жыл бұрын
So glad you were able to catch this one, Christina! 😃 Hope you liked it!
@annettekindler699
5 ай бұрын
About to make my Disney cruise door magnets and this was very helpful!! wish me luck lol
@mothermayi7832
2 жыл бұрын
I love the magnet joke, that was funny. I also love that you are such a good teacher
@samanthabyrd1402
2 жыл бұрын
Super cute 😊 I love to make magnets.
@mildredpepe552
2 жыл бұрын
Thank you Michael. I'm looking forward to your video on car stickers.
@craftynet
2 жыл бұрын
Thanks so much for watching, Mildred! 😃
@ckeith1274
Жыл бұрын
Really looking forward to the car magnet video!!! I have bought several kinds of magnets and none have really been strong enough for the vehicles.
@yore17
2 жыл бұрын
Lol @ attractive joke. I love puns. ❤️
@hjackley143
2 жыл бұрын
That was easy, now to make a few.
@craftynet
2 жыл бұрын
Personally…. I’ve already made quite a few! They’re addicting! 😆❤️
@veronicacortez257
2 жыл бұрын
Amazing Video!!!!!
@craftynet
2 жыл бұрын
Thank you so much for watching, Veronica! 😃
@minitorestrepo7233
2 жыл бұрын
Great video!
@craftynet
2 жыл бұрын
Thanks so much for watching it! 😃
@patgenerous6997
2 жыл бұрын
Hey from Bristol, Tennessee
@craftynet
2 жыл бұрын
Hi Pat! Thank you for watching! 😃
@sheilawolfer9184
2 жыл бұрын
Can't wait to try this
@craftynet
2 жыл бұрын
You’re going to love it, Sheila! It’s so much fun!
@elyseclaprood432
2 жыл бұрын
Awesome job Michael!
@craftynet
2 жыл бұрын
Thank you so much, Elyse! 😃
@nadineshort7587
2 жыл бұрын
Thanks for this video....I,m going to try this!
@LColb36180
2 жыл бұрын
Very helpful!!!
@fatimarazon8407
2 жыл бұрын
Love double premieres!!
@craftynet
2 жыл бұрын
Aren’t they so much fun? 😆❤️
@fatimarazon8407
2 жыл бұрын
@@craftynet and so much FUN 🤩
@fatimarazon8407
2 жыл бұрын
@@craftynet yesssss 🍿🍿
@lydiapellegrin3067
2 жыл бұрын
Too cool! Thanks!
@arnessad16
2 жыл бұрын
You laid the laminate down so smoothly. Did you use the taco method?
@jakiajones4779
2 жыл бұрын
Thanks for the awesome video!
@craftynet
2 жыл бұрын
Thank you for watching, Jakia! 😃
@AS-lm9xm
2 жыл бұрын
I like how you explain how to o things, you make it easy to follow. Awesomeness 🤩🤩
@rosac8168
2 жыл бұрын
Omg micheal just when I’m wonder what if I can do … here you come. I love you ❤️ thank you making that for my sister 👍👍
@craftynet
2 жыл бұрын
Aww! You’re so sweet, Rosa! So glad it helped! 😃
@joyscranfield5527
2 жыл бұрын
Hopefully I'll be on time for this...Tennessee time that is.
@craftynet
2 жыл бұрын
Can't wait to see ya there Joy!!
@reneemeyer5217
2 жыл бұрын
Love all your videos
@craftynet
2 жыл бұрын
You’re so sweet!! Thank you so much for watching, Renee! 😃
@lexlyahsjourney7252
Жыл бұрын
where is the video for the car magnet?
@christinahaney5585
2 жыл бұрын
this was very awesome. learned something awesome tonight.
@craftynet
2 жыл бұрын
So glad you liked it, Christina! 😃
@kathiestapleton4151
2 жыл бұрын
OMG…. I just got to watch the replay. This is a game changer. Thank you for making me smarter in my vinyl crafting journey.
@bridgettegriffith4
2 жыл бұрын
so glad u shared this!! I been needing to see a video of this
@craftynet
2 жыл бұрын
Thank you so much for watching!! So glad you liked it, Bridgette! 😃
@IBEWelectronut
2 жыл бұрын
Dang. Caught the live video right when you were finishing up. I'll have to catch the replay. Printing out magnets sounds like a pretty cool idea. Thanks for all you do. And howdy from Oklahoma.
@craftynet
2 жыл бұрын
Hope you were able to catch the replay! It’s such a fun and cool project! 😃
@beadntiger2296
2 жыл бұрын
Thanks for another great tutorial!
@craftynet
2 жыл бұрын
Thank you so much for watching! 😃
@fatimarazon8407
2 жыл бұрын
I already know how to make magnets on my Cricut but I really enjoyed this. Thank you Michael.
@craftynet
2 жыл бұрын
Thanks so much for watching, Fatima! 😃
@fatimarazon8407
2 жыл бұрын
@@craftynet always 🤍📺
@audreyigla5384
2 жыл бұрын
Can't wait
@craftynet
2 жыл бұрын
Hope you liked it, Audrey! 😃
@lisahowell1030
2 жыл бұрын
Great job!
@craftynet
2 жыл бұрын
Thank you so much for watching, Lisa! 😃
@stacyjones200
2 жыл бұрын
Cool tutorial! That gives me an idea for recipe magnets 🙂
@craftynet
2 жыл бұрын
Please be sure to share your project with us in our Crafty.net Community Facebook Group! We’d love to see it! 😃
@jessicahites871
2 жыл бұрын
Fantastic tutorial!!
@craftynet
2 жыл бұрын
Thanks so much for watching, Jessica! 😃
@Rachy71
2 жыл бұрын
Thank you doing this for making magnets. I tried watching another video and I was so confused. I'm new to Cricut but you just made this so simple to follow. Thanks again.
@BlinginBeezy
2 жыл бұрын
Caught the replay, thank you so much for another awesome tutorial ❤️.
@tammyp2782
2 жыл бұрын
Thank you for making everything so simple. I love your videos because you get to the point without talking for an hour 👍
@I.Have.Spoken
Жыл бұрын
I would like to watch your video about the car magnet that you mentioned but I can’t find it. Can you please provide a link to it?
@ViciousRose48
Жыл бұрын
Can I use a sublimation printer to do this as well or does it only have to be ink jet?
@StarrOlinger
2 жыл бұрын
Lovethis tutorial! As always it was very informative. (Dad joke wasn't that bad 🤣😂)!
@craftynet
2 жыл бұрын
Lol! Thanks so much for watching, Starr! 😆❤️
@tamiwalker9474
2 жыл бұрын
This is handy
@craftynet
2 жыл бұрын
Very handy! Thank you so much for watching! 😃
@ajoseph75
2 жыл бұрын
Can I use my white toner printer with a Cricut Maker?
@craftynet
2 жыл бұрын
I’m not familiar enough with the white toner printers to be able to tell you a 100% certain answer, but there shouldn’t be an issue as long as it’s compatible with the material you’re using. 😃
@beverlyhutchinson8051
2 жыл бұрын
Do you like the eco tank for a inkjet printer?
@craftynet
2 жыл бұрын
I do! It works great, however, the Canon TS9521C may be my personal favorite.
@dianab3927
2 жыл бұрын
Great job
@craftynet
2 жыл бұрын
Thank you so much, Diana! 😃
@Annie-io6wc
2 жыл бұрын
Needed this video so much! Had the materials but had not attempted to make yet. Thanks so much, Michael!
@craftynet
2 жыл бұрын
So glad it helped! Thank you for watching, Annie! 😃
@anneshoemaker4033
2 жыл бұрын
Thanks - as always I learn so much from you!
@craftynet
2 жыл бұрын
You’re so sweet! Thank you for watching, Anne!
@swpa64blueeyes
2 жыл бұрын
Omgosh, I wanna make some magnets now! I have an Explore Air 2. Would I be able to make them with it and if so, what kind of cutting blade would I need? As always, another Awesome tutorial...
@marisolm9863
2 жыл бұрын
Hi Michael. Would it be possible to laminate a magnet sheet either with a heat laminator or with regular laminating sheets?
@ShannonC08
2 жыл бұрын
Can you make photo magnets the same way?
@craftynet
2 жыл бұрын
Absolutely! 😃
@lostsouls2998
2 жыл бұрын
HAVE A QUESTION !!what program file to use to do custom tattoo transfer print ? Thanks if someone could help me out here .
@labrown7547
2 жыл бұрын
Can I used the Epson Ecotank ET 2850
@kristinemason5435
2 жыл бұрын
Love this! Gonna order supplies now! Thank you so much Michael! You rock!
@craftynet
2 жыл бұрын
So glad you liked it, Kristine! 😃
@michellebrennan1304
2 жыл бұрын
How much can you charge for a 2" X 3" magnet done this way?
@helenamachado7129
2 жыл бұрын
what a great idea! I love the fresh ideas you have.
@craftynet
2 жыл бұрын
Thank you so much for watching, Helena! 😃
@cmt61308
2 жыл бұрын
Do any perment vinyls that can be used for car decals have that uv film built in?? Realized that I never checked after making decals for my car 🤦♀️🤦♀️🤦♀️🤦♀️
@craftynet
2 жыл бұрын
High quality permanent vinyl like StarCraft HD will last outdoors up to 5-6 years. 😃
@MickisMom
2 жыл бұрын
This is a great file to do this on. Btw, is that a little bit of magic getting a magnet to adhere to a stainless steel fridge?
@jacobus57
2 жыл бұрын
True stainless is not a ferrous metal (meaning the alloy stress not have much iron), and magnets will not adhere to it
@craftynet
2 жыл бұрын
It adhered perfectly fine with no trouble. So glad you liked the file! 😃
@rowdyhousefam
2 жыл бұрын
Love it thank you for this video such a great tutorial as always and thank you for another craft to make!🥰
@craftynet
2 жыл бұрын
Thanks for watching, Amber! 😃
@jenniferjohnson7342
2 жыл бұрын
The only time I can get the color print option is using design space on my phone. Crazy!
@alishalittle458
2 жыл бұрын
Loved this, do have a question if someone can answer, why do you use the laminate sheet?
@craftynet
2 жыл бұрын
Hi Alisha! It was used to protect from fading from UV light as well as to protect from splashes. It’s not mandatory to use it. 😊
@joankirsch4532
2 жыл бұрын
Why would you pick svg for a print then cut. I thought you pick png for that. Am I wrong?
@amandarosewarren
Жыл бұрын
trying the today
@laurent4203
2 жыл бұрын
Thanks again for another simple craft. More excuses to actually use my cricut.
@craftynet
2 жыл бұрын
Thanks for watching, Lauren! Any excuse to use it is a good excuse! 😃
@rofobowman
2 жыл бұрын
QUESTION. HOW DO YOU CREATE THE THICKER LINES AROUND THE PRINTABLE? MY PRINTER MAKES THE LINE TOO THIN TO BE READ.
@craftynet
2 жыл бұрын
Some people have tried going over the lines with a black sharpie, but I’m not sure there’s a way to set it up to where it’ll automatically print that way.
@rofobowman
2 жыл бұрын
Thanks! I did do that and it worked. Just wondered if I was doing something wrong. Just did my first print and cut yesterday. Cannot wait to try the magnets!
@rosac8168
2 жыл бұрын
Michael can you do a tutorial on images for a mouse pad please!!!! I'm trying to put my family of pups 🐶 ❤️
@craftynet
2 жыл бұрын
Hi Rosa! Are you wanting to sublimate images onto a mousepad? If so, you may find this video helpful! You would just use your image of pups instead of one of the Crafty files. 😃 kzitem.info/news/bejne/2Idt06iVb4mnrH4
@sherrifesterman7192
2 жыл бұрын
My epson printer doesn't say fast print. It took me a google search to find out that bidirectional printing is the same thing. Gotta remember to turn that off.
@Pretear521
Жыл бұрын
Does anyone have the issue when putting the laminate the magnets curl after a while?
@joyscranfield5527
2 жыл бұрын
Are we ready to start? Michael where are you, Morgan?
@craftynet
2 жыл бұрын
❤️❤️❤️
@Steph_here
2 жыл бұрын
yay im here for the people who don't drink
@MariaJonesGutierrez
2 жыл бұрын
Don't forget to calibrate!
@audreyigla5384
2 жыл бұрын
Replay squad
@jacobus57
2 жыл бұрын
This seems like a situation where a cutter isn't the best choice. A straightedge and a sharp knife and a good pair of scissors if you want rounded corners, especially for smaller magnets, would result in wasting much less material. The limitations of print and cut are beyond irritating. I have seen a few videos about work arounds that are supposed to "trick" the sensors into accepting a full sheet less margins, and I'm going to give those a try.
@craftynet
2 жыл бұрын
It all depends on what you’re wanting to cut out and how you want it to look! Plus, that extra material isn’t wasted… but that’s another video for another day! 😉❤️
@jacobus57
2 жыл бұрын
@@craftynet oooo! I LOVE your thrift with materials :) I can't wait to see that "salvage" video
@nonyabidnazz7487
2 жыл бұрын
the Amazon reviews are terrible for this magnetic paper.. the reviews say the magnetic paper is super thin and barely sticks to anything.. let alone.. cars.. Imma look for a better product cuz magnets are a grrrrrreat idea!!
@craftynet
2 жыл бұрын
I actually ended up ordering and testing 10 different brands and this was the type that worked best for me. However, like I said in the video, it’s not made for cars. There’s a separate video coming soon for that. 😊
@barbaramckenzie326
2 жыл бұрын
Good instructions, but... I know you were just joking about eating a battery, but it's no joking matter. Young children that swallow button batteries have terrible caustic burns to their throats, sometimes causing death, or at the very least, eating and breathing issues for the rest of their life. Sorry to be a downer, just pleae be cautious about jokes...
@mrcraftypants
2 жыл бұрын
Hi Barbara, I never said anything about a battery.
@barbaramckenzie326
2 жыл бұрын
@@mrcraftypants omg- you’re right!! I had a real brain fart! So sorry- I’ll climb down off my soapbox now!
@mrcraftypants
2 жыл бұрын
@@barbaramckenzie326 no worries! Brain farts happen to all of us! 😉❤️
@patgenerous6997
2 жыл бұрын
Great video!
@StDebb
2 жыл бұрын
Can this be done on the Explore Air 2, or do you have to have the 3?
@craftynet
2 жыл бұрын
Absolutely! It can definitely be done on the Explore Air 2 😃
Пікірлер: 133